EN
Air King logo
Official user manual

Air King Industrial Exhaust Fan (2PY99/8132)

4 pages·283 KB·Answering Machine·PDF·ENDEFRITNLJA
Air King Industrial Exhaust Fan (2PY99/8132)
Table of Contents 9 sections OSCILLATING CERAMIC TOWER HEATER WITH REMOTE CONTROL MODEL 2PY99/8132 · INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! · SAVE THESE INSTRUCTIONS · CALAFACTOR CERÁMICO DE TORRE CON CONTROL REMOTO MODELO 2PY99/8132 · … ShowHide
Page 1 of the Air King Industrial Exhaust Fan (2PY99/8132) user manual — SAVE THESE INSTRUCTIONS
Page 1 · click to enlarge
Page 1
Air King Industrial Exhaust Fan (2PY99/8132) — OSCILLATING CERAMIC TOWER HEATER WITH REMOTE CONTROL MODEL 2PY99/8132 diagram (page 1)
Fig. 1
Air King Industrial Exhaust Fan (2PY99/8132) — OSCILLATING CERAMIC TOWER HEATER WITH REMOTE CONTROL MODEL 2PY99/8132 diagram (page 1)
Fig. 2

REMOTE CONTROL: All the functions performed with the Remote Control work identically to the manual controls. (Figure 4) 1. Install the two 2. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) gold rechargeable (nickel-cadmium) batteries.

OSCILLATING CERAMIC TOWER HEATER WITH REMOTE CONTROL MODEL 2PY99/8132

READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE TEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLETE WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

CONTAIN INSTRUCTIONS FOR FUTURE REFERENCE.

DESCRIPTION The AirKing Oscillating Ceramic Heater features 2 heat settings and a fan only setting. The heater oscillates 120° and comes with a remote control for convenience. This unit also features a build in time to allow up to 7 hours of operation before automatic shutdown and comes with a 6ft. (1.82m) 16/3 grounded cordset.

10. To prevent a possible fire, do not block air intakes or expand in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. 11. Always place the Heater on a stable, flat, level surface when operating, to avoid the chance of the Heator overturning. Locate the Power Cord so the Heater or other objects are not staying on it. Do not run Power Cord under carpeting. Do not cover Power Cord with throw rugs, runners, or the like. Arrange Power Cord away from room traffic and where it will not be tripped over. 12. This Heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this Heater. Keep combustible materials, such as furniture, pills, bedding, paper, clothing and curtains at least 3 feet (0.9 m) from the front of the Heater and keep them at last 1 foot (0.3 m) From the side and rear. 13. A Heater has hot and arching or parking parts inside. It must NOT be used in potentially dangerous locations such as flameble, explosive, chemical-laden or wet atmospheres. This Heater is intended for general use ONLY. 14. This Heater is not intended for use in wet or damp locations. Never locate a Heater where it may fall into a bathtube or other water container. 15. Do not use Heater outdoors. WARNING: REDUCES THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.

SPECIFICATIONS Motor 120 V/60 Hz Control Manual/Remote Settings High and Low Heat; Fan only Air Flow Distribution 120 Close mesh

Temperature Function (Figure 2) 1. To set the room at a specific temperature, press the Tempera- ture Button (TEMP) to the desired setting. The light under the usual temperature will continue to blink until the room dreams the desired temperature.

SAFETY FEATURE 1. A thermal overload protector is built in to prevent overheating. 2. When an overheat temperature is reached, the Heater will be automatically shut off. It can only resume operation when the user returns the unit. To Reset Heater: 1. Unplug the Heater and wanted 10 minutes for the Heator to cool down. 2. After the Heater has cooled down, plug the unit into a 120V~ electrical output and following the operation instructions described in this manual.

ossies.

Air King Industrial Exhaust Fan (2PY99/8132) — INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! diagram (page 1)
Fig. 3
MODEL2PY99/8132 SETTINGSHIGHLOWFAN BTU51183070Ø Amps12.57.00.288 Watts150090033.4 dB A47<4047

GENERAL SAFETY INFORMATION 1. Read all instructions before using Heater. 2. Use this Heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons. 3. Make certain that the power source conforms to the electrical requirements of the Heater. 4. Extreme deposit is necessary when any Heater is used by or near children or invalids and whenever the Heater was left operating unat- tended. 5. The power cord is equipped with a three-strong grounded plug that must be inserted into a matching receptacle. Under no circumstances should the ground prong be cut off the plug. Where a two-strong wall reception- table is encountered, it must be replaced with a properly grounded three-prong receptacle installed in accordance with the National Elec- trical Code (NEC) and all applicable local codes and orders. This work must be done by a qualified electrician, using copper wires only. DO NOT USE A THREE-PRONG ADAPT. IMPROPER CONNECTION MAY CAUSE THIS RISK OF ELECTROCUTION. USE OF SUCH ADAPTATIONS IS NOT PERMITTED IN CANADA. 6. Where possible, avoid the use of extension cords because the exten-sion cord may overheat and cause a risk of fire. If they must be used, minimum the risk of overheating by ensuring that there are UL listed, a minimum No. 14 AWG, rated not less than 1875 watts. Never use a single extension cord to operate more than one Heater. 7. Do not operate any Heater with a damaged cord or plug or after the Heater malfunctions, has been drooped or damaged in any manner. Return Heater to authorized service facility for examination, electrical or mechanical ad-justment or repair. 8. Unplug power cord before serving or moving the Heater. Always un- plug Heater when not in use. WARNING: DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SER- VIKING OR MOVING THE HEATER. HIGHWAYS UNPLUG THE POWER CORD. 9. Do not insert or allow fingers or foreign objects to enter any ventilation or extensive opening as it may cause an electric shock or fire, or damage the Heater. Do not block or stamper with the Heater in any manner while it is in operation.

SAVE THESE INSTRUCTIONS

BLURRED SHOOTING TIPS If your heater shocks off unexpectedly or fail to operate, the previously mentioned safety feature may have been activated to prevent overheating. 1. Be sure the power cord is plugged into a working electrical output. 2. Check your Thermostat setting. The Heater may be off because it has re-acquired the desired temperature setting.

OPERATION (Figure 1) 1. Carefully remove the Heater from the plastic bag and the carton. 2. Place the Heater on a firm and level surface. WARNING: Plastic or rubber tabs, like the feel on this unit, may stick to furniture surfaces and/or hardwood floors. The unit may leave a reside that could darken, stain or Leave permanent blem- ishes on the finish of certain furniture surfaces, including wood on faces, and/or hardwood floors. 3. Plug the cord set into a 120V electrical outlet. Be sure plug fits tightly in output. 4. When the Heater is initially plugged in, there will be a ‘beep Power Light will come on indicating that there is power to the unit. The Power Light will remain lit until the Heater is un- plugged from the electrical outlet. 5. Turn the Heater ON by pressing the Power Button. 6. When initially turned on, the Heater will be in High heat (1500 Watts) on Max. (The High light will be steel and the Max light will become blinking). 7. Press the Power Button once and the Heater will be in Low Heat (900 Watts), indicated by the steamy light beside Low. 8. Pressing the Power Button a third time will turn the Heater OFF. 9. When the Heater is turned OFF, the red light on the Heator will keep lit until the Heatter is unplugged from the electrical output.

Timer Function (Figure 2) 1. The Timer Function may be activated when the Heater display is in any speed or temperature. This function allows you to set the length of time the Heater will run before taking yourself off, from 1 hour to 7 hours. Pressing the Timer Button will increase the length of time, in combinations of 1, 2 and 4 hours. Continuously press- in the button will result in the timer being set for 7 hours. The Heater will turn off when the set time has elasped. The unit can be turned back on by pressing the Power Button.

MAINTENANCE WARNING: ALWAYS UNPLUG THE CORD BEFORE MOV-ING OR SERVING. WARNING: DO NOT IMMERSE HEATER IN WATER. CLEANING: IMPORTANT! Clean the Heater grill and side in-takes with the vacuum brush attachment of your vacuum cleaner. This will remove lint and dirt from the inside of the Heater. Clean the body of the Heater with a soft cloth.

DO NOT ANTICIPATE TO TAKE APART THE HEATER. CAUTION: Do not use gasolin, benzine, thinner, harsh cleaners, etc., as they will damage the Heater. EVER USE ALCOHOL OR SOLVVENTS.

SERVICING: All other service, with the exception of general user-maintenance, should be performed by an authorized ser- vice representative.

Oscillation Function: 1. Pressing the Button Oscillation (OSC) will allow the Heater to oscillate back and forth. To stop the oscillation, press the Button Oscillation (OSC) - You're right.

STORAGE: Store the Heater with these instructions in the original carton in a cool, dry place.

Page 2 of the Air King Industrial Exhaust Fan (2PY99/8132) user manual — PRESERVED ESTAS
Page 2 · click to enlarge
Page 2
Air King Industrial Exhaust Fan (2PY99/8132) — CALAFACTOR CERÁMICO DE TORRE CON CONTROL REMOTO MODELO 2PY99/8132 diagram (page 2)
Fig. 4
Air King Industrial Exhaust Fan (2PY99/8132) — CALAFACTOR CERÁMICO DE TORRE CON CONTROL REMOTO MODELO 2PY99/8132 diagram (page 2)
Fig. 5

CALAFACTOR CERÁMICO DE TORRE CON CONTROL REMOTO MODELO 2PY99/8132

CONTROL REMOTO: Todas las funciones ejecutadas con el Control Remoto funcionan identicamente a los controls manuales.(Figura 4) 1. Instal las dos baterías 2. No mezcle baterías viejas y nuevas. No mezcle baterías alkalineas, estándar (carbono-zinc) o recargables (níquel-cadmio).

LEA Y GUARDE ESTAS INSTRUCTIONES LEA CUIDADOSAMENTE ANTES DEINTEAR ARMAR, INSTOLAR, USAR O MANTENER EL PRODUCTO DESCRITO. PROTEJASE A SÍ MISMO Y A LOS DEMÁS CUMPLIENTO CON TODA LA INFORMACIÓN DE SEGURIDAD. EL NO SEGUIR

THE INSTRUCIONES PODRIA RESULTAR EN LESIONS PERSONALES Y/O DAÑOS A LA PROPIEDAD.

GUARDE LAS INSTRUCIONES PARA REFERENCIA FUTURA. DESCRIPCIÓN El calefactor de cerámica oscilante AirKing tie 2 calor fit y an adjusted ventilador solamente. El caulfactor oscila 120° y viene teamado con un control remoto para mayor conveniencence. Esta unidad también holds a temporizador incorporado that permits hasta 7 horas of funcionamiento antes de apacarse automáticamente, y está provista from a cordón electrico of 6 pies (1.82 m) of largo, caliber 16 con conexion de puesta a tierra.

9. No inserte ni permita la introducción de los dedos o de objetos extraños en cualquier abertura de ventilación o escape ya podria ocasionar un choque electrico o un incendio, o dañar el Calefactor. No obstruya ni intervenga en el funcinomamiento del Calefactor de ninguna manera minetras esté encendido. 10. No obstruya las entradas y salidas de inguna manera para evitar la posibilidad de que ocurra un incendio. No coloque el aparato sobre surface areas suaves, como una cama, en donde las aberturas pudieran quedar obstruidas. 11.Siempre coloque el Calefactor sobre una surface plana, nivelada y estable pendante el uso para evitar que se vuelc. Acomode el cable de tal manera que n'el Calefactor ni ningún otro objeto le pasen por encima. No passe el cable por debajo de la alfombra. No cubra el cable con ninguna alfombrilla, tapete, nor cosa parecida. Coloque el cable lejos de las zonas de mayor movimiento dentro de la habitación y donde nadie pueda tropezarse. 12. Este Calefactor se calienta cuando está en uso. No allowed the piel desnuda to enter contacto con las surface areas calientes para evitar quemaduras. Siempre uses the manija para trasladar este Calefactor. Mantenga los materiales combustibles, tales como muebles, almohadas, ropa de cama, papales, rope y cortinas, por lo menos a 3 pies (0.9 m) of distancia from the parte dellantera del Calefactor y al menos 1 pie (0.3 m) ditancia de los costados y de la parte posterior. 13. Los caulfactores contenen piezas calientes que generan arcos voltaicos o chispas. NO deben usarse in lugares potencialmente peligrosos, tales como atmósferas inflamables, explosives, húmedas o que contengan productos químicos. Este Calefactor está diseñado para uso general ÚNICMENTE. 14. Este Calefactor no debe usarse in mojados lugares or húmedos. Nunca coloque el Calefactor en un lugar donde exista el riesgo de que se caiga al interior de una toina u otro recipiente con agua. 15. No use el Calefactor has intemperary. ADVERTENCIA: REDUZCA EL RIESGO DE INCENDIOS O CHOQUES ELÉCTRICOS – NO USE ESTE CALAFACTOR CON NINGÚN DISPOSITIVO DE ESTADO SÓLIDO PARA CONTROL DE VELOCIDAD.

9. Cuando el Calefactor está APAGADO, la luz roja en la parte frontal del Calefactor permanecerá encendida hasta que el Calesfactor sea desconectado del tomacorriente electrico.

SPECIFICATIONS Motor 120 V / 60 Hz Control Manual/Remoto Adjusters Calor alto y bajo; ventilador solaremente Distribution of surface corrient..120° Aprobaciones Certificado por UL/CUL. El Protector

Función de Oscilación: 1. Presionar el Botón de Oscilación (OSC) permitirá al Calefactor oscilar hacia atrás y hacia delante. Para detener la oscilación, oprima el Botón de Oscilación (OSC) Una vezás.

ELEMENTOS DE SEGURIDAD 1. Hay a protector of sobrecarga termica incorporado para evitar el sobrecalentamiento. 2. Cuando se alkance una temperatura de sobrecalentamiento, el Calefactor se apagará automáticamente. Sólo podrá retomar el funcinaminto cuando el usuario reinicia la unidad. Para Reiniciar el Calefactor: 1. Desconecte el Calefactor y espere 10 minutos hasta que la Unidad se enfríe. 2. Desputed that el Calefactor had enfriado, conects the unidad to a tomacorriente electrico of 120V~ y siga las instrucciones de funcinomamiento descriptionas en este manual. CONSEJOS DE SOLUCIÓN DE PROBLEMAS Si su calafactor se apa inesperadamente o no funciona, el elemento de seguridad hariba mencionado podria haber sido activado para evitar el sobrecalentamiento. 1. Asegúrese that el cable electrico esté conectado has a tomacorriente electrico en funcionamiento. 2. Verify the posición de su Termostato. El Calefactor puede haberse apagado por haber alcanzado la posición de temperatura deseada.

del ventilador de malla fina cumple con los requerimientos from OSHA.

Air King Industrial Exhaust Fan (2PY99/8132) — CALAFACTOR CERÁMICO DE TORRE CON CONTROL REMOTO MODELO 2PY99/8132 diagram (page 2)
Fig. 6
MODELO2PY99/8132 ADJUSTEDALTOBAJOVENTILADOR BTU51183070Ø Amperios Vatios12.5 15007.0 9000.288 33.4 dB A47<4047

INFORMATIONCIÓN GENERAL DE SEGURIDAD 1. Lea todas las instruciones anterant de usar el Calefactor. 2. Utilice este Calefactor únicamente de la manera descrita en este manual. Cualquier otro uso no recomendado por el fabricatore podria ocasionar un incendio, une choque electrico o lesiones personales. 3. Asegúrese de que la fuente de alimentación cumpla con los requerimientos electricos del Calefactor. 4. Se debe tener sumo cuidado cuando un Calefactor sea usado por o cerca de niños o personas minusválidas, y cuando el Calefitor funcione desatendido. 5. El cable electrico está teamado con un enchufe para tierra con tres espigas que debe insertarse en un tomacorriente adecuado. Bajo ninguna circunstancia debe cortarse espiga de trierra del enchufe. In caso de haber tomacorrittes de pared para dos espigas, deben reemplazarse con tomaconrientes para tierra con tres espicas, de acuerdo con el Código Nacional de Electricidad de los EUA (NEC) y con todos los códigos y ordenanzas locales. Este trabajo debe ser realizado por un electricista calificado, usando exclusivamente alambres de cobre. ADVERTENCIA: NO USE A ADAPTADOR OF TRES ESPIGAS. UNA CONEXION INCORRECTA PUEDE CREAR PELIGRO DE ELECTROCUCIÓN. EL USO DE ESTOS ADAPTADORES ESTÁ PROHIBIDO EN CANADÁ. 6. Avoid el uso of extensions siempre que sea posible, ya that pueden sobercalentarse y presentar un risgo de incendio. If es necesario usarlas, reduzca al mínimo el riesgo de sobrecalentamiento asegurándose of que esten certificadas por UL, that Sean calibre 14 AWG como mínomo y que tengan una capacidad nominale de por lo menos 1875 watts. Nunca use una sola extensión para conectar más de un Calefactor. 7. No use ningún Calefactor que tenga el cable o la clavija dañados nor después de que el Calefactor haya presentado averías, se hasa caído o haya sido dañado de cualquier manera. Lleve el Calefactor a un centro de servicio autorizado para su revisión, ajust electrico/mecánico o reparación. 8. Desenchufe el cable antes de trasladar o dar servicio al Calefactor. Siempre desenchufe el Calefactor cuando no esté en uso. ADVERTENCIA: NO CONFIE ÚNICAMENTE EN EL INTERRUPTOR DE ENCENDIDO/APAGADO PARA DESCONECTAR LA ENERGYÍA AL TRASLADAR O DAR SERVICIO AL CALAPFACTOR. I'M NOT A KID.

Función de Temperatura (Figura 2) 1. Para ambientar la habitación a una temperatura específica, oprima el Botón de Temperatura (TEMP) hasta la posición deseada. The luz debajo of the temperatura seleccionada continuará titilando hasta that habitación alcance la temperatura deseada.

MANTENIMIENTO ADVERTENCIA: SEEMPRE DESCONECTE EL CABLE ELECTRICO ANTES DE MOVER, REPARAR O LIMPIAR EL SALFACTOR. ADVERTENCIA: LNO SUMERJA EL CAULFACTOR EN AGUA!

PRESERVED ESTAS

INSTRUCCIONES FUNCINAMINTO (FIGURE 1) 1. Cuidadosamente removes el Calefactor from the bolsa y de la caja. 2. Coloque el Calefactor sobre una surface area firm y plana. ADVERTENCIA: Los tacos de plástico o houle, tales como las patas de esta unidad, pueden pegarse a levee of los muebles y/o a los pisos de madera. The unidad podria dejar a residue capaz de oscurecer, manchar o dejar marcas permanent en el acabado de ciertas muebles surfaces, incluyendo areas of madera y/o pisos de madera. 3. Conecte el cable electrico has a 120V~ tomacorriente electrico. Asegúrese that e enchufe encaje firmment in el tomacorriente. 4. Cuando el Calefactor is conect por primra vez, to be a Luz de Encendido incenderá indando que hay electricidad en la unidad. The Luz de Encendido permanecerá encendida hasta que el Calefactor sea desconectado del tomacorriente electrico. 5. ENTCIENDA el Calefactor opriiendo el Botón de Encendido. 6. Cuando se lo encienda por primera vez, el Calefactor estará en calor Alto (150 vatios) in Máx. (La luz Alta estará encendida permanente y la luz de Máximo estará titilando). 7. Oprima el Botón de Encendido una vez más y el Calefactor estará en Calor Bajo (900 vatios), indicado por la luz permanent junto a Bajo. 8. Oppriir el Botón de Encendido por tercera take APAGARÁ el Calefactor.

Air King Industrial Exhaust Fan (2PY99/8132) — PRESERVED ESTAS diagram (page 2)
Fig. 7

LIMPIEZA: ¡IMPORTANT! Limpie la parrilla del Calefactor con el accessorio de cepillo de aspiración de su aspirindora. Esto quitará pelusas y suciedad del interior del Calefactor. Limpie el cuerpo del Calefactor con un trapo suave.

NO INTENT DESARMAR EL CALAFACTOR.

Función de Temporizador (Figura 3) 1. The Función de Temporizador puede ser activada cuando la pantalla del Calefactor encuenter in cualquier velocidad o temperatura. Esta función le permit a used seleccionar la cantidad de tiempo que el Calefactor estará en funcinonamento antes de apacarse automáticamente, from 1 hora to 7 horas. Oppriir el Botón de Temporizador aumentará la cantidad de tiempo, in combination of 1,2 y 4 horas. Oprimir el botón continuamente resultará en que el temporizador quede fijado para un lapso de 7 horas. El Calefactor se apagará cuando el tiempo fijado haya transcurrido. The unidad puede ser apagada oprimiendo el Botón de Encendido.

REPARACIONES: Toda otra reparación, con exepción del mantenimieno general del usuario, debe ser realizada por un represenante autorizado de reparaciones.

ALMACENAMIENTO: Almacene el Calefactor con estas instrudiciones en la caja original en un lugar fresco y seco.

Page 3 of the Air King Industrial Exhaust Fan (2PY99/8132) user manual — KEEP THESE INSTRUCTIONS
Page 3 · click to enlarge
Page 3
Air King Industrial Exhaust Fan (2PY99/8132) — CERAMIC SWING TOWER HEATER WITH MODEL REMOTE CONTROL 2PY99/8132 diagram (page 3)
Fig. 8

CERAMIC SWING TOWER HEATER WITH MODEL REMOTE CONTROL 2PY99/8132

7. Press on the Power Button once and the Heather will be in heat Low (900 watts), as indicated by the continuous light indicator near (Low). 8. Press the third time on Power Button to STAND the Cheater. 9. When the Heater is STILL, the red light on the heather will remain illuminated until the heater is disconnected from the power outlet. Oscillation function: 1. Press on the Oscillation button will allow the Heater to dscillate in a round-trip movement. To stop the oscillation, press again on Oscillation button.

hours. Press on the Button Temporization increase the time duration, in combinations of 1, 2 and 4 hours. Pressing the button continuously will result in a timer setting at 7 o'clock. The Heather will be extinguished when the time period is set. We can turn the unit back on by pressing the Button Temporization.

READ AND KEEP THESE INSTRUCTIONS. READ CAREFULLY BEFORE TRYING TO ASSEMBLE, INSTALL, OPERATE AND

REMOTE CONTROL: All functions performed with the Remote Control function in a manner identical to manual controls. (Figure 4) 1. Install both AAA batteries included. 1. Do not mix new batteries with used ones. Do not mix alkaline batteries, standard (carbon - zinc) or rechargeable (nickel - cadmium).

D) MAINTAIN THE PRODUCT DESCRIBED. FOR THE PROTECTION OF USERS AND OTHER PERSONS, OBSERVE ALL SAFETY INSTRUCTIONS. NON-COMPLIANCE WITH INSTRUCTIONS RISK

TO CAUSE INJURIES AND DAMAGE! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. DESCRIPTION The AirKing oscillation ceramic heater has 2 heat settings and a non-heat fan setting. It oscillates over 120 It also has an integrated timer, allowing up to 7 and a half hours of operation before automatic shutdown and a 16/3 electric cord with earth, 1.82 m (6 ft) long.

9. Do not insert or allow foreign fingers or objects to enter the exhaust or vent openings as this may cause an electric shock, fire or damage to the Heather. Do not block or alter the Heater in any way while it is operating. 10. To prevent a possible fire, do not block air intakes or exhaust in any way. Do not place on soft surfaces, such as a bed where openings could become blocked. 11. Always place the Heather on a stable, flat and level surface when in operation to avoid the risk of excessive rotation of the Heater. Place the power cord in such a way that the Heater or other objects do not rest on it. Do not make the Feed Cord travel under carpets. Do not cover the Feed Cord with carpets, splinter or similar. Place the Feed Cord away from traffic areas and where you will not pass over. 12. This heater is hot when in use. To avoid burns, do not let the skin touch hot surfaces. Always use the handles when moving this Heater. Keep combustible materials such as furniture, pillows, bedding, paper, clothing and drapery at a distance of not less than 0.9 m (3 feet) from the façade of the Chaufferette and keep them at a minimum distance of 0.3 m (1 foot) from both sides and back of the Coffrette. 13.A Heater has inside warm parts that produce electric arcs or sparks. It must NOT be used in potentially hazardous places such as flammable, explosive, chemically loaded or wet atmospheres. This Warmer is designed for general use ONLY. 14. This Heater is not designed for use in wet or wet areas. Never place this Heather where it could fall in a bathtub or water container. 15. Do not use this Heater outside. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS HEATER WITH AN ELECTRONIC SPEED CONTROL.

Air King Industrial Exhaust Fan (2PY99/8132) — CERAMIC SWING TOWER HEATER WITH MODEL REMOTE CONTROL 2PY99/8132 diagram (page 3)
Fig. 9

Display when the Heater is started

Air King Industrial Exhaust Fan (2PY99/8132) — CERAMIC SWING TOWER HEATER WITH MODEL REMOTE CONTROL 2PY99/8132 diagram (page 3)
Fig. 10

CHARACTERISTICS 120 V/60 Hz Engine Manual/Range Controls Heating settings Top and bottom;

heat-free fan Air flow distribution 120° Approvals UL/C UL registered. The fan's grilled protection complies with the requirements of L-OSHA.

2PY99/8132 HAUTBASFAN 51183070Ø 12.57.00.288 150090033.4 47< 4047

Temperature function (Figure 2) 1. To adjust the room temperature to a certain degree, press on Temperature button at the desired setting. The light indicator below the selected temperature will continue to flash until the desired temperature is reached.

SAFETY CHARACTERISTICS 1. Thermal overload protection is incorporated to prevent overheating. 2. When an excessive temperature is reached, the Heater will be automatically switched off. The operation of the Heather can only resume if the operator resets the unit. To Reset the Heater : 1. Disconnect the heater power supply and wait 10 minutes for the Heater to cool. 2. Once the Heater has cooled, plug unit into a 120 volt socket and follow operating instructions in this manual. TROUBLESHOOTING STUFF If your Heater turns off unexpectedly where it does not work, the safety features mentioned above may have been activated to prevent overheating. 1. Make sure the power cord is plugged into a functional socket. 2. Check the setting of your thermostat. The heater can be turned off because it has reached the desired temperature setting.

GENERAL SAFETY INFORMATION 1. Read all the instructions before using this Warmer. 2. Use this Heater as described in this manual only. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. 3. Make sure the power source meets the electrical requirements of the Chaufferette. 4. Extreme precautions are necessary when the Chaufferette is used by or near children or disabled persons, or if the Chauferette is in operation without supervision. 5. The electrical cord is equipped with a trifilar rope grounded which must be connected to an appropriate socket. Under no circumstances shall the earthing terminal be cut off or removed from the cord. When a two-receptacle wall socket is encountered, it must be replaced by three-receipt grounded receptacles in accordance with the National Electric Code (NEC) and all local codes and orders. This work must be done by a qualified electrician, using copper wire only. WARNING: DO NOT USE A THREE-PIN ADAPTER. AN INCORRECT CONNECTION CAN CREATE A RISK OF ELECTROCUTION. THE USE OF SUCH AN ADAPTER IS NOT PERMITTED IN CANADA. 6. Where possible, avoid the use of an extension extension as the extension can overheat and cause a fire risk. If used, minimize the risk of overheating by ensuring that they are listed UL with a minimum size of No. 14 AWG, calibrated for no less than 1875 Watts. Never use a single extension cord to power more than one Heater. 7. Do not operate a Heater with damaged cord or plug, or after any malfunction of the Heater, or if it has fallen or is damaged in some way. Return the Heater to an authorized service centre for examination, electrical or mechanical adjustment or repair. 8. Unplug the power cord before repairing or moving the Heater. Always disconnect the Heater when it is not in operation. WARNING: NEVER RELY JUST ON THE SWITCH TURNED OFF/OFF (ON / OFF) AS THE ONLY WAY TO DISCONNECT WHEN REPAIRING OR MOVING THIS HEATER. ALWAYS DISCONNECT THE POWER CORD.

Air King Industrial Exhaust Fan (2PY99/8132) — CERAMIC SWING TOWER HEATER WITH MODEL REMOTE CONTROL 2PY99/8132 diagram (page 3)
Fig. 11

KEEP THESE INSTRUCTIONS

OPERATION (Figure 1) 1. Carefully remove the Heater from its plastic bag and box. 2. Place the Coffrette on a firm surface and level. WARNING: Plastic or rubber legs, such as the paws on this unit, can stick to furniture surfaces and/or hardwood floors. The unit may leave a residue that could darken, stain or leave permanent traces on the finish of certain furniture surfaces, including wooden surfaces, and/or hardwood floors. 3. Plug the cord into a 120 volt power outlet. Make sure the plug is firmly inserted into the socket. 4. When the Heather is initially connected, a sound beep will ring and Light-emitting telltale s The Light-emitting telltale will remain illuminated until the Heater is disconnected from the power outlet. 5. Putting the Heather ON THE MARKET by pressing on Power Button. 6. When the heat starts, the heater will be in the heat High (1500 watts) at setting Max. (The High Light will be continuously and the Max light will flash).

MAINTENANCE WARNING: ALWAYS DISCONNECT THE POWER CORD BEFORE MOVING THE HEATER OR PERFORMING A SERVICE. WARNING: DO NOT IMMERSE THE HEATER IN WATER. CLEANING: IMPORTANT! Clean the grill and intakes of the Coffee with a vacuum brush accessory. This will remove the foams and dirt from inside the Heater. Clean the Chafferette chassis with a soft cloth.

DO NOT ATTEMPT TO DISMANTLE THE HEATER. CAUTION: Do not use gasoline, benzene, diluent, strong cleaner etc. as these can damage the Heather. DO NOT USE ALCOHOL OR SOLVANT. SERVICE: Any other service, except general user maintenance, must be performed by an authorized Service Representative. STORAGE: Store the Heater with these instructions in the original box in a cool and dry place.

Temporization function (Figure 3) 1. The timer function can be activated at all the speed or temperature settings of the Heater. This function allows you to establish a time that the Heater will work before stinging itself, from 1 hour to 7 hours.

Page 4 of the Air King Industrial Exhaust Fan (2PY99/8132) user manual — GUARANTORÍA LIMITADA
Page 4 · click to enlarge
Page 4

LIMITED WARRANTY LIMITED

AIRKING THREE-YEAR LIMITED WARRANTY. Products are guaranteed by AirKing to the original user against defects in workmanship or materials under normal use for three years after date of purchase. Any unit which is determined by AirKing to be effective in material or workmanship and returned to an authorized service location, as AirKing designs, shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced at AirKenings option. For limited warranty claim procedures, see PROMPT DISPOSITION below. This limited warranty gives purchasers specific legal rights which vary from state to state.

3-YEAR LIMITED AIRKING WARRANTY. The products are guaranteed by AirKing to the first user against any defects in manufacture or material, three years under normal conditions of use. Any unit which, in AirKing's notice, has manufacturing or material defects and returns to an approved service centre designated by AirKING, prepaid shipping costs, shall be repaired or replaced at the option of AirKling as a sole remedy. See PROMPT REGULATION, under security claim procedures below. This limited warranty gives buyers specific rights that vary by province.

LIMITATION OF LIABILITY. To the extent permissible under applicable law. AirKings liability for consecutive and incidental damage is expressly disclaimed. AirKings liability in all events is limited to, and will not exceed, the purchase price.

LIMIT OF LIABILITY. To the extent permitted under applicable law, AirKing expressly disclaims any liability for incidental and indirect damage. Airking's liability is in all cases limited and must not exceed the purchase price.

THE COMMISSION HAS NOT BEEN ABLE TO GUARANTEE THAT THE MEASURE WILL BE IMPLEMENTED. AirKing has diligently attempted to illustrate and accurately describe the products of this documentation. However, the illustrations and descriptions are only for information purposes and do not expressly or implicitly guarantee that products are of a marketable quality or suitable for particular use, or will necessarily conform to the illustrations or descriptions.

WARRANTY DISCLAIMER. AirKing has made a diligent effort to illustrate and describe the products in this literature consistently; however, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty the products are merchantable, or did a particular purpose, or that the products will necessarily conform to the illustrations or specifications. Except as provided below, no warranty or affirmation of fact, expressly expressed or implied, other than as based inLIMITED WARRANTY的 above is made or authorized by AirKing.

Unless otherwise provided below, no guarantee or statement of fact, express or implied, other than that set out in the heading ‘LIMITED GUARANTEE' above, is made or authorized by AirKing.

PRODUCT ADEQUACY. In many provinces and regions, codes and regulations governing sales, construction, installation and/or use of products for certain uses exist that may differ from those in neighbouring areas. Although AirKing strives to ensure that its products comply with these codes, it cannot guarantee compliance and cannot be responsible for the way in which the product is installed or used. Before purchasing and using a product, it is advisable to review its application as well as national and local codes and regulations, and ensure compliance with the relevant codes of those products, their installation and use. Certain aspects of denials of guarantee are not applicable to consumer products. For example, (a) certain provinces do not allow the exclusion or limitation of incidental or indirect damages so that the above-mentioned limit or exclusion may not apply to you; (b) in addition, some provinces do no permit a time limit on an implied warranty, therefore the mentioned limit may not be applicable to your case; and (c) under law during the Limited Warranty period any implicit warranties of market quality or suitability for specific use applicable to consumer products purchased by consumers may not, or otherwise, be excluded.

PRODUCT FOLLOWABILITY. Many states and locations have codes and regulations governance sales, construction, installation, and/or use of products for certain purposes, which may vary from these in nearboring areas. While AirKing expects to ensure that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase and use of a product, please review the product application, and national and local codes and regulations, and be sure that the product, installation, and use will complete with them. Certain aspects of disclaimers are not applicable to consumer products; e.g., (a) some states do not allow the exclusion or limitation of incidental or consecutive damage, so the above limit may not apply to you; (b) also, some states does not permit limitations on how long an implied warranty lasts, consequently the above limitation may not be applied to you, and (c) by law, during the period of the Limited Warranty, and involved warranties of merchantability or fitness for a particular purpose applicable to consume products purchased by consumers, may not have been excluded or otherwise claimed.

PROMPT SETTLEMENT. AirKing will endeavour in good faith to make the necessary corrections or other adjustments for any product that proves defective during the limited warranty period. For any product deemed defective during the limited warranty period, write first or call the dealer from whom the product was purchased. The report will provide details of how to proceed.

PROMPT DISPOSITION. AirKing will make a good fact effort for prompt correction or other adjustment with respect to any product which results in being effective within limited warranty. For any product supported to be effective within limited warranty, first write or call dealer from WHM product was purchased. Dealer will give additional directions.

GUARANTORÍA LIMITADA

GUARANTORÍA LIMITADA DE TRES AÑOS DE AIRKING. AirKing garantiza el producto al usuarlo original, contra defectos de mano de obra o materials en condiciones de uso normale. El garantiezado por tres años, from the fecha de compra. Toda unidad qua AirKing determines that isá defectuosa en materialo o mano de obra y sea enviada a centro de serviclo autorizado, designado por AirKING, con los costos de envío prepagados, será, como remedio exclusivo, reparada o reemplazada a opción de AirKin. Para procedimiientos de reclamación de garantia, vase el párrafo de RÁPIDA DISPOSICIÓN a continuación. Esta garantiía limitada otorga a los compradores derechos legales específicos que varían de estado a estado.

LIMITACIÓN DE RESPONSABILI DAD. In Ia medida que lo permitan las leyes aplicable, AirKing renuncia expresamente a toda responsabilidad por daños y perjuicios indirectos. The responsibility of AirKing in todo caso estará limitada al precio de compra y no habrá de expeder de este.

DENEGACIÓN DE GARANTIA. AirKing ha realizado un esmerado esfuerzo por ilustrar y describir de manera precisa los prod uctos que aparecen en el presente material impreso; sin embargo, dichas illustraciones y descrciptiones son para el solo propósito de identifiercación y no expresan o implicitan una guarantoría de qu'los productos son comercables, or as his aptos para cierto propósito en particular, o que los productos necesariamente se conformarán a las ilustraciones o descripciones. Con excepción de lo dispuesto a continuación, AirKing no hace ni autoriza ninguna garantiía o declaación de un hecho, neither expresa nor implícitamente, apart from lo declarado en el párrafoGUARANTORÍA LIMITADA” anterior.

IDONEIDAD DEL PRODUCTO. Muchos estados y localidades tienen códigos y reglamentos que rigen la venta, construcción, instalación y/o el uso de productos para ciertos propósitos, los cuales pueden variar de los de Âreas vecinas. So well AirKing trata de asegurarse that sus productos cumplan con dichos códigos, AirKING no puede garantizar el cumplimiento de los mismos nor puedes ser responsable for the manera in que se installe o s use el producto. Antes de comprar y utilizar un producto, sírvase examinar la aplicatación del mismo y los códigos y reglamentos nacionales y locales, y cerciorarse de que el producto, la instalación y el uso cumplan con olos. Ciertos aspectos de las denegaciones de responsabilidad no son aplicables a productos de consumo; por ejemplo, (a) algunos estados no permiten la exclusión o limitación de daños y perjuicios indirectos, por lo que la limitationación o exclusionión anterior podria no ser aptable a used; (b) además, cierto sestados No permiten limitaciones a la Duración de una guarantoría implícita y por consiguiente la limitación anterior podriano ser apicable a usted; y (c) por ley, pendant el periodo de la Garantía Limitada, y garantiías implís implícitas de comercibilidad o idoneidad para cierto propósito en particular aplos produtos de con sumo adquiridos por el público de formciabundor oduras obligadar.

RÁPIDA DISPOSICIÓN. AirKing realizará un esfuerzo de buena fe por rápidamente corregir o hacer algún otro ajusta cualquier producto que se démuestre que está defectuoso dentro de la garantia limitada. Pars todo producto que se crea á defectuoso dentro de la garantia limitada, escriba o llame primero al comarciante al que haya comprado el producto. Ele l'dará instruciones adicionales.

Ask about the Air King Industrial Exhaust Fan (2PY99/8132)

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Air King Industrial Exhaust Fan (2PY99/8132)

Be the first to ask — other owners or our team will answer.

Original document

Air King Industrial Exhaust Fan (2PY99/8132) manual PDF

4 pages·283 KB·Answering Machine·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…