EN
JVC logo
Official user manual

JVC AV21YG21

24 pages·451 KB·Flat Panel Television·PDF·ENDEFRITNLJA
JVC AV21YG21
Table of Contents 16 sections AV-21YG11,AV-21YG21 · Safety precautions · Preparation · 1 Confirm which remote control you have · … ShowHide
Page 1 of the JVC AV21YG21 user manual — AV-21YG11 AV-21YG21 AV-21WM11
Page 1 · click to enlarge
Page 1

Contents

Safety precautions 2 Preparation 3 1 Confirm which remote control you have 3 2 Inserting the batteries 3 3 Connecting the aerial and external devices ...4 4 Connecting the power cord 5 5 SETUP TOUR 6 Basic operation 7 Remote control buttons and functions 8 ECO SENSOR button 8 PICTURE MODE button 8 COLOUR SYSTEM button 8 SOUND SYSTEM button 9 DISPLAY button 9 RETURN + button 9 MUTING button 10 OFF TIMER button 10 CHANNEL SCAN button 10 PICTURE BOOSTER button 10 Viewing teletext programmes 11 Using the TV’s menus 13 Basic operation 13 INPUT 14 VNR 14 ON TIMER 14 AUTO SHUTOFF 15 CHILD LOCK 15 BLUE BACK 15 AI ECO DISPLAY 16 LANGUAGE 16 AUTO CH PRESET 16 MANUAL CH PRESET 17 SKIP 18 SETUP TOUR 18 TEXT (Teletext Language) 18 Picture Adjustments 18 TV buttons and parts 19 Using the buttons on the TV 20 Troubleshooting 21 Specifications 22

COLOUR TELEVISION INSTRUCTIONS

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

AV-21YG11 AV-21YG21 AV-21WM11

GGT0007-001B-H 0803-NIC-JMT © 2003 VICTOR COMPANY OF JAPAN, LIMITED

Page 2 of the JVC AV21YG21 user manual — CAUTION
Page 2 · click to enlarge
Page 2

Safety precautions

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

  • TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.
  • Operate only from the power source specified on the TV.
  • Avoid damaging the power cord and main plug. When you unplug the TV, pull it out by the main plug. Do not pull on the power cord.
  • Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.
  • Do not allow objects or liquid into the cabinet openings.
  • In the event of a fault, unplug the TV and bring to JVC service centre. Do not attempt to repair it by yourself or remove the rear cover.
  • The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
  • When you don’t use this TV for a long period of time, be sure to disconnect the power plug from the AC outlet.
  • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

10 cm 15 cm 10 cm

15 cm

Page 3 of the JVC AV21YG21 user manual — Preparation
Page 3 · click to enlarge
Page 3
Page 3 of the JVC AV21YG21 user manual — Preparation
Page 4 of the JVC AV21YG21 user manual — I Connecting the aerial and VCR
Page 4 · click to enlarge
Page 4

3 Connecting the aerial and external devices

  • For further details, refer to the manuals provided with the devices you are connecting.
  • Connecting cables are not supplied.
  • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording).

I Connecting the aerial and VCR

JVC AV21YG21 — I Connecting the aerial and VCR diagram (page 4)
Fig. 1 · I Connecting the aerial and VCR

Preparation

Page 5 of the JVC AV21YG21 user manual — I Connecting other external devices
Page 5 · click to enlarge
Page 5

I Connecting other external devices

JVC AV21YG21 — I Connecting other external devices diagram (page 5)
Fig. 2 · I Connecting other external devices
  • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.

4 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the rear of the TV.

Preparation

Page 6 of the JVC AV21YG21 user manual — SETUP TOUR
Page 6 · click to enlarge
Page 6

5 SETUP TOUR

When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.

  • In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 16.

1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.

JVC AV21YG21 — 5 SETUP TOUR diagram (page 6)
Fig. 3

SETUP TOUR

2 Press the CHANNEL –/+ or the MENU / buttons to select the on-screen language.

SETUP TOUR

LANGUAGE

ENGLISH

NEXT

EXIT BY OPERATE BY -+ DISPLAY 3 Press the CHANNEL –/+ or the MENU / buttons to select the teletext language group. For details, see page 18. (For AV-21YG21 only.)

  • To stop the AUTO PROGRAMMING function, press the CHANNEL m or the MENU / buttons. When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO PROGRAMMING function operation is completed.

SETUP TOUR

  • If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET function. For details, see page 17.

TEXT LANGUAGE

ARABIC

NEXT

EXIT BY OPERATE BY -+ DISPLAY 4 The AUTO PROGRAMMING function will start and the indicator blinks.

5 Upon the completion of AUTO PROGRAMMING function, the message below is displayed.

SETUP TOUR

SETUP TOUR

NOW PROGRAMMING

THANK YOU!

STOP BY -+

Preparation

Page 7 of the JVC AV21YG21 user manual — Basic operation
Page 7 · click to enlarge
Page 7

Basic operation

1 Press the POWER button to turn your TV on.

The illustration below is for the remote control RM-C364GY. Your remote control may not look exactly like the illustration.

  • If your TV does not turn on, press the Main power button on the TV then press the POWER button again.
  • You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button - the Number buttons - the TV/VIDEO button
JVC AV21YG21 — Basic operation diagram (page 7)
Fig. 4 · Basic operation

2 Select a channel. I Press the CHANNEL m button.

  • Up/down selection cannot be selected for channels to which the SKIP has been set to “ YES ”. See page 18. I Press the Number buttons to enter

the channel number.

  • If you want to enter a two-digit number, press the -/-- button to select the two digit mode “--”, then enter the channel number.

3 Press the VOLUME M button to adjust the sound.

4 To turn your TV off, press the POWER button.

  • We recommend that you press the Main power button on the TV to turn the main power off if you do not plan to use your TV for a long time or if you wish to save energy.

If the picture is not clear: Press the COLOUR SYSTEM button to select another colour system, see page 8.

If the sound is not clear: Press the SOUND SYSTEM button to select another sound system, see page 9.

Viewing Images from an External Device: Press the TV/VIDEO button to select the VIDEO mode.

  • You can also use the INPUT function to select the VIDEO mode. For details, refer to page 14.
Page 8 of the JVC AV21YG21 user manual — PICTURE MODE button
Page 8 · click to enlarge
Page 8

Remote control buttons and functions

ECO SENSOR button

COLOUR SYSTEM button

<AV-21WM11 only> You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV.

If the picture is not clear or no colour appears, change the current colour system to another colour system.

Press this button to select the colour system.

In TV mode (channel 1 to 99 and AV):

Press this button to select the desired mode.

AUTO PAL SECAM NTSC3.58 NTSC4.43

AI ECO SENSOR 1: The AI ECO SENSOR function switches on. Usually, it is recommended to watch the TV in this mode.

AUTO PAL SECAM

In VIDEO mode:

AI ECO SENSOR 2: The AI ECO SENSOR function switches on. If you feel the screen in the “AI ECO SENSOR 1” mode is too dark, select this mode.

AUTO

AI ECO SENSOR OFF: The AI ECO SENSOR function switches off.

  • You can display on the screen the effect of the AI ECO SENSOR function. For details, see “AI ECO DISPLAY” on page 16.

PICTURE MODE button

You can select one of three picture adjustment settings as you like.

Press this button to select a mode.

BRIGHT: Heightens contrast and sharpness.

STANDARD: Standardizes picture adjustments.

SOFT: Softens contrast and sharpness.

  • Pressing this button returns all the picture settings in the “ MENU 4 ” to their default settings.

<AV-21YG11/AV-21YG21 only> · <AV-21WM11 only>

Page 9 of the JVC AV21YG21 user manual — DISPLAY button
Page 9 · click to enlarge
Page 9

Remote control buttons and functions

SOUND SYSTEM button

RETURN + button

If the sound is not clear even when the picture appears normal, change the current sound system to another sound system.

You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch.

Press this button to select the sound system.

To set the channel to the Return Channel:

1 Select the channel you want to set to the Return Channel.

B/G I D/K M

2 Press this button and hold until the message “RETURN PLUS PROGRAMMED!” appears.

B/G I D/K

  • When you turn off the TV, the Return Channel setting is cancelled.
  • For the sound systems in each country or region, see the table “Broadcasting systems” on page 22.
  • You cannot select any sound system when in a VIDEO mode.

To view the Return Channel: Press this button.

  • You can view two channels (current channel and Return Channel) alternately by pressing this button.

DISPLAY button

You can continuously display the current channel number or VIDEO mode on the screen.

To cancel the Return Channel setting: Press this button and hold until the message “RETURN PLUS CANCELLED!” appears.

Press this button. To turn the display off, press this button again.

If no channel is set to the Return Channel: You can view the channel selected right before the current channel by pressing this button.

  • When selecting a channel or VIDEO mode with no input signal, indication of selected channel or VIDEO mode becomes fixed on the screen.

<AV-21YG11/AV-21YG21 only> · <AV-21WM11 only>

Page 10 of the JVC AV21YG21 user manual — PICTURE BOOSTER button
Page 10 · click to enlarge
Page 10

Remote control buttons and functions

MUTING button

CHANNEL SCAN button

You can turn the sound off instantly.

You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view.

Press this button. To turn the sound on, press this button again.

1 Press this button to start scanning TV channels. The TV channel programmes are each displayed for several seconds.

OFF TIMER button

You can set the TV to automatically turn off after a set time.

  • The programmes of TV channels for which the SKIP function is set to “ YES ” are not displayed. (See page 18.)

Press this button to select the period of time.

  • You can set the period of time to a maximum of 120 minutes in 10 minute increments.
  • 1 minute before the OFF TIMER function turns off the TV, “ GOOD NIGHT! ” appears.

2 When you find the programme you want to view, press this button again to stop scanning.

PICTURE BOOSTER button

To display the remaining time, press this button once.

<AV-21YG21/AV-21YG11 only> When the picture is unclear because the reception level of the TV signal is low, activating the Picture Booster improves the picture clarity in some situations. Repeatedly press the PICTURE BOOSTER button to select the desired mode.

To cancel the OFF TIMER function, press this button to set the period of time to “0”.

  • The OFF TIMER function will not turn off the TV’s main power.

HIGH: The Picture Booster is functioning at maximum.

LOW: The Picture Booster is functioning at minimum.

OFF: The Picture Booster is off.

  • If the picture becomes abnormal when you set the Picture Booster to HIGH , then set it to LOW or OFF .
Page 11 of the JVC AV21YG21 user manual — I Basic operation
Page 11 · click to enlarge
Page 11

Viewing teletext programmes

I Basic operation

JVC AV21YG21 — I Basic operation diagram (page 11)
Fig. 5 · I Basic operation

1 Select a TV channel with a teletext programme.

2 Press TV/TEXT button to change the TV mode to the teletext mode.

TV mode TEXT mode (TEXT only)

3 Select a teletext page by pressing the CHANNEL –/+ button, number buttons or coloured buttons.

To return to the TV mode, press the TV/VIDEO button or the TV/TEXT button.

  • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station.

1 TV/TEXT button 2 Coloured buttons 3 REVEAL button 4 SUBPAGE button 5 HOLD button 6 SIZE button 7 CANCEL button 8 INDEX button

<AV-21YG21 only>

Page 12 of the JVC AV21YG21 user manual — SIZE
Page 12 · click to enlarge
Page 12

REVEAL

INDEX

Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.

You can return to the index page instantly.

Press the INDEX button.

Each time you press the REVEAL button, text is hidden or revealed.

Returns to teletext page 100 or a page which has been specified.

HOLD

SUBPAGE

You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received.

Some teletext pages include sub-pages that are automatically displayed. You can hold any sub-page, or view it at any time.

Press the HOLD button. To cancel the HOLD function, press the HOLD button again.

1 Press the SUBPAGE button to operate the Sub-page function.

2 Press the Number buttons to enter a sub-page number.

CANCEL

You can watch a TV programme even when in the teletext mode.

Example: 3rd sub-page © press 0, 0, 0 and 3.

  • You can also select a sub-page by pressing the red or green button. To cancel the Sub-page function, press the SUBPAGE button again.

1 Press the Number button to enter a page number, or press a coloured button. The TV starts searching for a teletext page.

SIZE

2 Press the CANCEL button. The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen.

You can double the height of the teletext display.

Press the SIZE button. The teletext display changes cyclically.

3 Press the CANCEL button to view the teletext page.

JVC AV21YG21 — SIZE diagram (page 12)
Fig. 6
  • Pressing the CANCEL button cannot change the teletext mode to the TV mode.

Viewing teletext programmes

Page 13 of the JVC AV21YG21 user manual — SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Page 13 · click to enlarge
Page 13

Using the TV’s menus

This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus.

2 Repeatedly press the MENU T buttons to display a desired menu.

<RM-C375GY/RM-C364GY>

RETURN + 0 -/-- CHANNEL

  • If you hold down the y button, the next menu is displayed.
  • If the selected function is on the first line, pressing the r button displays the preceding menu.

SCAN

MUTING DISPLAY

DISPLAY

MENU

MENU /

CHANNEL

VOLUME

3 Repeatedly press the MENU T buttons to select a desired function.

CHANNEL –/+

<RM-C92>

4 Press the CHANNEL M or the MENU / buttons to change function settings.

SYSTEM COLOUR SOUND MUTING

DISPLAY

DISPLAY

TV/TEXT

Example:

Changes the AUTO SHUTOFF setting.

MENU

buttons / MENU buttons

PICTURE BOOSTER

TV/VIDEO

MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON

MENU 2 AUTO SHUTOFF ON CHILD LOCK OFF BLUE BACK ON

OFF TIMER

PICTURE

AI ECO DISPLAY ON

AI ECO DISPLAY ON

MODE

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

CHANNEL

SCAN

RETURN+

CHANNEL

VOLUME

  • With some functions, the operation method may differ.

5 Press the DISPLAY button to turn the display off.

I Basic operation

  • To operate a menu using the buttons on the front panel of the TV, refer to “Operating menus” on page 20.

1 Press the MENU T buttons. One of the 4 menus is displayed.

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR OFF

The icon on the left indicates the currently selected function.

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

Show 9 more labels / short text on this page
button · buttons MENU –/+ · buttons · buttons · button · MENU t · 0 -/-- · buttons CHANNEL –/+ · MENU number
Page 14 of the JVC AV21YG21 user manual — SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Page 14 · click to enlarge
Page 14

Using the TV’s menus

INPUT

ON TIMER

You can view images from VCRs or other devices connected to your TV.

Your TV will automatically turn on and tune into the channel you set after the period of time you set.

1 Press MENU T to display the “MENU 1” menu, then select “INPUT”.

1 Press MENU T to display the “MENU 1” menu, then select “ON TIMER”.

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR OFF

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR OFF

Channel No.

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

OPERATE BY VOL-+ SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / to select the VIDEO mode. TV mode changes to VIDEO mode.

2 Press CHANNEL M or MENU / to select a channel you want to view when the TV turns on.

3 Press VOLUME M to select the period of time after which you want to turn on the TV. The ON TIMER function starts. • Each time you press the button, the period of time changes in 15 minute intervals (up to 12 hours). To cancel the ON TIMER function, press the VOLUME m button to set the period of time to “0:00”.

VNR

<AV-21WM11 only> You can reduce the picture noise.

1 Press MENU T to display the “MENU 1” menu, then select “VNR”.

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR ON

  • 4 Press DISPLAY to turn the display off.
  • If you turn off the TV’s main power by pressing the Main power button, the ON TIMER function is canceled.
  • If you do not turn off the TV after starting the ON TIMER function, the channel will automatically switch to the channel set for the ON TIMER function.

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / to select “ON”. To cancel the VNR function, select “OFF”.

  • When the time set for the ON TIMER function is reached: The TV automatically turns on and the channel set for the ON TIMER function is displayed.
  • For safety reasons the TV will automatically turn off if no operations are made within approximately two hours after the TV is turned on with the ON TIMER function.
  • The OFF TIMER function and AUTO SHUTOFF function have priority over the ON TIMER function.
Page 15 of the JVC AV21YG21 user manual — AI ECO DISPLAY ON
Page 15 · click to enlarge
Page 15

Using the TV’s menus

AUTO SHUTOFF You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast.

BLUE BACK

If no signal is being received or the signal is very weak, a blue screen automatically becomes the picture background. If you wish to continue viewing the poor picture, you must set the BLUE BACK function to “OFF”.

1 Press MENU T to display the “MENU 2” menu, then select “AUTO SHUTOFF”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON

1 Press MENU T to display the “MENU 2” menu, then select “BLUE BACK”.

AI ECO DISPLAY ON

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON

2 Press CHANNEL M or MENU / to select “ON”.

AI ECO DISPLAY ON

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

  • To cancel the AUTO SHUTOFF function, select “ OFF ”.
  • The AUTO SHUTOFF function does not turn off the TV’s main power.
  • The AUTO SHUTOFF will not work for a VIDEO mode.

2 Press CHANNEL M or MENU / to select “ON”. To cancel the BLUE BACK function, select “OFF”.

CHILD LOCK You can disable the front control buttons of the TV. When this function is set to “ON”, the TV can be operated using only the remote control. Use this function to prevent children from operating the TV without parental consent.

1 Press MENU T to display the “MENU 2” menu, then select “CHILD LOCK”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON

AI ECO DISPLAY ON

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / to select “ON”.

To cancel the CHILD LOCK function, select “OFF”.

  • The CHILD LOCK function is canceled when you turn the power off.
Page 16 of the JVC AV21YG21 user manual — MENU 3 AUTO CH PRESET MANUAL CH PRESET
Page 16 · click to enlarge
Page 16

Using the TV’s menus

AI ECO DISPLAY

AUTO CH PRESET

<AV-21WM11 only> You can display on the screen the effect of the AI ECO SENSOR function.

You can automatically preset all TV channels that can be received by your TV to channels.

1 Press MENU T to display the “MENU 3” menu, then select “AUTO CH PRESET”.

1 Press MENU T to display the “MENU 2” menu, then select “AI ECO DISPLAY”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON

LANGUAGE ENGLISH SETUP TOUR

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

AI ECO DISPLAY ON

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / to select “ON”. The clover mark indicating the brightness of your room is displayed for several seconds each time the brightness changes. The number of clover marks displayed on screen increases as your room becomes darker. To cancel the AI ECO DISPLAY function, select “OFF”.

2 Press CHANNEL M or MENU / to start the AUTO CH PRESET function. “>>>ON SEARCH” is displayed on the screen. When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed. To stop the AUTO CH PRESET: Press the CHANNEL m or the MENU / buttons.

LANGUAGE You can select the language for the on-screen display.

  • The AUTO CH PRESET function does not preset a TV channel to the AV channel (channel number 0).
  • If the TV cannot preset the TV channel you want to view, preset it manually. For details, see “MANUAL CH PRESET” on page 17.

1 Press MENU T to display the “MENU 3” menu, then select “LANGUAGE”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET

LANGUAGE ENGLISH SETUP TOUR

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / to select language. The on-screen display indications are in the selected language.

Page 17 of the JVC AV21YG21 user manual — MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT
Page 17 · click to enlarge
Page 17

Using the TV’s menus

MANUAL CH PRESET

If the picture is not clear: Fine-tune the TV channel.

You can manually preset desired TV channels to desired channels.

1 Press MENU t to select “FINE”.

1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

MENU 3 AUTO CH PRESET MANUAL CH PRESET

SELECT BY PR 3 VL PROGRAM BY -+ EXIT BY FINE BY VOL-+ DISPLAY

LANGUAGE ENGLISH SETUP TOUR

2 Hold VOLUME m down to fine-tune the TV channel so that the best image is displayed on screen.

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / . The sub-menu is displayed.

“>” or “

If the sound is not clear:

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

1 Press MENU t to select “SOUND SYSTEM”.

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY SEARCH BY VOL-+ DISPLAY

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

  • The channel number is displayed as a PR number. For example, channel 1 will be displayed as PR 1. However, the AV channel will be displayed as AV.

SELECT BY PR 3 VL PROGRAM BY -+ EXIT BY CHANGE BY VOL-+ DISPLAY

2 Press VOLUME m to select the appropriate sound system.

3 Press CHANNEL M or MENU / to select the channel number.

  • For the sound systems in each country or region, refer to the table “Broadcasting systems” on page 22.

4 Press VOLUME M to start searching for the TV channel. “>>>” or “” or “

5 Press MENU T to select “MANUAL”.

6 Repeat steps 3 to 5 if you want to preset another TV channel to a channel.

  • If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the TV channel you want to preset.
  • To stop the MANUAL CH PRESET function, press any button other than the VOLUME m button.
Page 18 of the JVC AV21YG21 user manual — SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Page 18 · click to enlarge
Page 18

Using the TV’s menus

SKIP You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons or the CHANNEL SCAN button.

TEXT (Teletext Language)

<AV-21YG21 only> You can view a Farsi teletext programme.

1 Press MENU T to display the “MENU 3” menu, then select “LANGUAGE”.

  • Channels to which TV channels have not been preset are automatically set to be skipped.

2 Press CHANNEL –/+ or MENU / to select Arabic or Persian.

1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”.

3 Press MENU y to select TEXT function.

2 Press CHANNEL M or MENU / . The sub-menu is displayed.

4 Press CHANNEL –/+ or MENU / to select Farsi. Select Arabic to view an Arabic teletext programme.

3 Press MENU T to select “SKIP”.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

Picture Adjustments

SELECT BY PR 3 VL PROGRAM BY -+ EXIT BY YES/NO BY VOL-+ DISPLAY

You can adjust the picture as you like.

1 Press MENU T to display the “MENU 4” menu.

4 Press CHANNEL M to select the channel you want to skip.

MENU 4 TINT COLOUR BRIGHT CONT. SHARP

5 Press VOLUME M to select “YES”. The channel is set to be skipped. To cancel the SKIP function, select “NO”.

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

6 Repeat steps 4 and 5 if you want to set another channel to skip.

2 Press MENU T to select an item and press CHANNEL M or MENU / to adjust it.

SETUP TOUR

TINT* -Reddish + : Greenish

You can start the SETUP TOUR function.

COLOUR -Lighter + : Deeper

1 Press MENU T to display the “MENU 3” menu, then select “SETUP TOUR”.

BRIGHT -Darker + : Brighter
CONT. -Lower + : Higher
SHARP -Softer + : Sharper

MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH

* TINT (tint) is displayed only when viewing images from NTSC3.58 or NTSC4.43 colour systems.

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press CHANNEL M or MENU / . JVC logo appears and the SETUP TOUR function will start. For details, see page 6.

Page 19 of the JVC AV21YG21 user manual — TV buttons and parts
Page 19 · click to enlarge
Page 19

TV buttons and parts

JVC AV21YG21 — TV buttons and parts diagram (page 19)
Fig. 7 · TV buttons and parts

4 5 3 1 2 7 9 0 8

4 5 3 1 2 6 7 9 0 8

1 Headphone jack 2 VIDEO/AUDIO terminal 3 MENU button 4 CHANNEL m buttons 5 VOLUME m buttons

6 ECO sensor 7 Remote control sensor 8 ON TIMER lamp 9 POWER lamp 0 Main power button

Page 20 of the JVC AV21YG21 user manual — MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT
Page 20 · click to enlarge
Page 20

Using the buttons on the TV

Basic operation

Operating menus

Check to make sure the CHILD LOCK function is set to “OFF”. When the CHILD LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD LOCK” on page 15.

You can operate functions in menus using the front control buttons on the TV.

1 Press MENU y to display a menu.

2 Press MENU y repeatedly to display the menu you want to use.

1 Press CHANNEL M to turn the TV on from standby mode.

3 Press MENU y to select the desired function or item.

2 Press CHANNEL M to select a channel.

4 Press CHANNEL M or VOLUME M to carry out the desired operation. For details, see the description for each function.

3 Press VOLUME M to adjust the volume.

4 To turn your TV off, press the Main power button to turn off the TV’s main power.

5 Press VOLUME M to turn the menu display off.

To change the TV mode to the VIDEO mode:

To turn the sub-menu display off:

  • Press the TV/VIDEO button if the TV has one. See page 7.

1 Press MENU y to select “EXIT”.

  • If the TV has no TV/VIDEO button, select the VIDEO mode with the INPUT function in “ MENU 1 ”.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY EXIT BY VOL-+ DISPLAY

2 Press VOLUME m to turn the display off.

Page 21 of the JVC AV21YG21 user manual — Troubleshooting
Page 21 · click to enlarge
Page 21

Troubleshooting

If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below.

If the problem persists even after taking the measures indicated, please contact a service technician.

Cannot turn the TV on

  • Press the Main power button on the TV.
  • Connect the power cord to the AC outlet.
  • Press the COLOUR SYSTEM button to select another colour system. (see page 8.)
  • Adjust the picture settings. (see page 18.)
  • Set the Picture mode to STANDARD. (see page 8.)
  • If noise (snow) totally blocks out the picture, check the following. - Have the TV and aerial been connected

The screen turns blue

  • Is the BLUE BACK function on? (see page 15.)
  • properly? - Has the aerial cable been damaged? - Is the aerial pointing in the right direction? - Is the aerial itself faulty?
  • If the TV or aerial suffer interference from other equipment, stripes or noise may appear in the picture. Move any equipment which can cause interference away from the TV.
  • If the TV or aerial suffer interference from signals reflecting from mountains or buildings, double-pictures (ghosting) will occur. Change the aerial’s direction or replace it with an aerial with better directionality.
  • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it is coloured. When the image disappears from the screen, the unnatural colours will also disappear.
  • Replace the batteries. (see page 3.)

Buttons on front of the TV do not work

  • Switch the CHILD LOCK function off. (see page 15.)

TV does not respond immediately

  • Press the main power button on the TV to turn off the main power. Press the main power button again to turn on the TV. If the TV returns to a normal state, operation is normal.

The TV turns off suddenly

  • Is the OFF TIMER function set to operate? (see page 10.)
  • Is the AUTO SHUTOFF function on? (see page 15.)
  • Have you not performed an operation for about two hours after the TV was switched on by the ON TIMER function? (see page 14.) If you don’t perform an operation within about two hours, the TV is automatically switched off for safety.

The TV turns on suddenly

  • Is the ON TIMER function set to operate? (see page 14.)

The TV channel changes suddenly

  • Is the ON TIMER function set to operate? (see page 14.)
  • Press the SOUND SYSTEM button to select another sound system. (see page 8.)

No receivable teletext programme <AV-21YG21 only>

  • Select a channel with teletext information. You cannot watch teletext recorded on a video tape.

Poor picture · Remote control inoperable · Poor sound

Page 22 of the JVC AV21YG21 user manual — Specifications
Page 22 · click to enlarge
Page 22

Specifications

AV-21YG11/AV-21YG21B, G, I, D, K, M AV-21WM11: B, G, I, D, K Colour systems

AV-21YG11/AV-21YG21: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz AV-21WM11: PAL, SECAM PAL, SECAM NTSC3.58MHZ, NTSC4.43 MHZ Receiving channels

VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output

INPUT: VIDEO input (RCA), AUDIO input (RCA) OUTPUT: VIDEO output (RCA), AUDIO output (RCA) Headphone jack: stereo mini jack (3.5 mm diameter) Teletext system (AV-21YG21 only)

FLOF (Fastext), WST (World Standard Text) Language displayed by teletext (AV-21YG21 only)

English, Lithuanian, Russian, Czechoslovakian, Ukrainian, Latvian, Romanian, Hungarian, Arabic, Persian Accessories

  • Remote control unit: AV-21YG21: RM-C92 AV-21YG11: RM-C375GY AV-21WM11: RM-C364GY
  • AA / R6 / UM-3 dry cell battery x 2 Design and specifications subject to change without notice. Broadcasting systems

Area Country or Region System Colour Sound Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. PAL B/G Indonesia, Malaysia, Singapore, Thailand, India, etc.

China, Vietnam, etc. PAL D/K

Hong Kong, etc. PAL I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM B/G

Philipins, Taiwan, Myanmar, etc. NTSC M

Russia, etc. SECAM D/K

Europe Czech Republic, Poland, etc. PAL D/K

Germany, Holland, Belgium, etc. PAL B/G

UK, etc. PAL I Oceania Australia, New Zealand, etc. PAL B/G

Republic of South Africa, etc. PAL I Africa Nigeria, etc. PAL B/G Egypt, Morocco, etc. SECAM B/G

TV RF systems · Asia, Middle · East

Page 23 of the JVC AV21YG21 user manual — Specifications
Page 23 · click to enlarge
Page 23
Page 23 of the JVC AV21YG21 user manual — Specifications
Page 24 of the JVC AV21YG21 user manual — Specifications
Page 24 · click to enlarge
Page 24
Page 24 of the JVC AV21YG21 user manual — Specifications

Ask about the JVC AV21YG21

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the JVC AV21YG21

Be the first to ask — other owners or our team will answer.

Original document

JVC AV21YG21 manual PDF

24 pages·451 KB·Flat Panel Television·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…