EN
JVC logo
Official user manual

JVC CA-FSH300

52 pages·1.4 MB·Stereo System·PDF·ENDEITNLJA
JVC CA-FSH300
Table of Contents 80 sections English Français · COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT · FS-H350 FS-H300 · –Consists of CA-FSH350 and SP-FSH350 · … ShowHide
English Françaisp.1COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACTp.1FS-H350 FS-H300p.1–Consists of CA-FSH350 and SP-FSH350p.1–Consists of CA-FSH300 and SP-FSH300p.1INSTRUCTIONS MANUEL D’INSTRUCTIONSp.1LVT1193-002Ap.1[C]p.1Warnings, Cautions and Othersp.2CAUTIONp.2RISK OF ELECTRIC SHOCKp.2DO NOT OPENp.2G-1p.2G-2p.3Introductionp.4About This Manualp.4Precautionsp.4Location of the Buttons and Controlsp.6Main Unitp.6Display windowp.7Remote Controlp.8Getting Startedp.9Unpackingp.9Connecting Speakersp.9Connecting AM and FM Antennasp.9Putting the Batteries into the Remote Controlp.10Connecting Other Equipmentp.10Common Operationsp.11Setting the Clockp.11To adjust the clockp.11CLOCK /TIMERp.11Turning On the Powerp.11STANDBY/ONp.11DOWN PRESET GROUPp.11SETp.11Turning Off the Unit Automatically (Auto Standby)p.11On the remote control ONLY:p.11A. STANDBYp.11Selecting the Sourcep.12Selecting the Sound Modesp.12SOUND/HBSp.12Adjusting the Volumep.12ROCKp.12CLASSIC POPp.12JAZZ FLATp.12VOLUMEp.12SOUNDp.12Reinforcing the Bass Soundp.12BASSp.12Fade-Out Muting (FADE MUTING)p.12Checking the Clock Time During Playp.12FADE MUTINGp.12DISPLAYp.12Playing Back Discsp.13Playing Back the Entire Disc—Normal Playp.13CD 3 / 8p.13MP3p.13Programming the Track Playing Order —Program Playp.14Basic Disc Operationsp.14PROGRAMp.14PRGMp.14To go to another track directly using the number buttonsp.14OVERp.14Repeating Tracks—Repeat Playp.15REPEATp.15ALLp.15Playing at Random—Random Playp.16Displaying the Remaining Time during Playbackp.16RANDOMp.16REMAINp.16TOTAL REMAINp.16REMAIN TOTAL REMAIN *p.16Playing Back Tapesp.17Playing Back a Tapep.17PUSH OPENp.17REV.MODEp.17TAPEp.17Listening to FM and AM Broadcastsp.18Tuning in to a Stationp.18Presetting Stationsp.18
Page 1 of the JVC CA-FSH300 user manual — LVT1193-002A
Page 1 · click to enlarge
Page 1

English Français

COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT

FS-H350 FS-H300

–Consists of CA-FSH350 and SP-FSH350

–Consists of CA-FSH300 and SP-FSH300

JVC CA-FSH300 — English Français diagram (page 1)
Fig. 1 · English Français

INSTRUCTIONS MANUEL D’INSTRUCTIONS

LVT1193-002A

[C]

Page 2 of the JVC CA-FSH300 user manual — G-1
Page 2 · click to enlarge
Page 2

Warnings, Cautions and Others

  • CAUTION— (STANDBY/ON) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line.
  • When the unit is on standby, the STANDBY lamp lights red.
  • When the unit is turned on, the STANDBY lamp goes off.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The power can be remote controlled.

  • ATTENTION—Touche (STANDBY/ON) Déconnectez la fiche secteur pour mettre l’appareil complètement hors tension (tous les témoins et toutes les indications s’éteignent). La touche (STANDBY/ON) dans n’importe quelle position ne déconnecte pas l’appareil du secteur.
  • Quand l’appareil est en mode d’attente, le témoin STANDBY est allumé en rouge.
  • Quand l’appareil est sous tension, le témoin STANDBY s’éteint.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

L’alimentation ne peut pas être commandée à distance.

For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

G-1

Page 3 of the JVC CA-FSH300 user manual — G-2
Page 3 · click to enlarge
Page 3

1 CLASS 1 LASER PRODUCT 2 CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3 CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4 REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE UNIT.

For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE INTERFER- ENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS. CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.

1 PRODUIT LASER CLASSE 1 2 ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune pièce réparable par l’utilisateur à l’intérieur de l’appareil; confiez toute réparation à un personnel qualifié. 3 ATTENTION: Risque de radiations laser visible et invisible quand l’appareil est ouvert et que le système de verrouillage ne fonctionne pas ou a été mis hors service. Évitez toute exposition directe au rayon. 4 REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE PRÉCAUTION PLACÉE À L’INTERIEUR DE L’APPAREIL.

GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZEN! VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRR ÄR URKOPPLAD STRÅLEN ÄR FARLIG. ADVARSEL -USYNLIG LASERSTRÅLING VED ÅBNING NÅR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING.

JVC CA-FSH300 — G-2 diagram (page 3)
Fig. 2

CAUTION: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

G-2

Page 4 of the JVC CA-FSH300 user manual — Precautions
Page 4 · click to enlarge
Page 4

Introduction

We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual

for future reference.

About This Manual

Power sources • When unplugging the unit from the wall outlet, always pull on the plug, not the AC power cord.

  • This manual is organized as follows:
  • This manual mainly explains operations using the buttons on the remote control. You can use the buttons both on the remote control and on the unit for the same operations if they have the same or similar names (or marks), unless mentioned otherwise.
  • Basic and common information that is the same for many functions is grouped in one place, and is not repeated for each procedure. For instance, we do not repeat the information about turning on/off the unit, setting the volume, changing the sound effects, and others, which are explained in the section “Common Operations” on pages 8 and 9.
  • The following symbols are used in this manual:

DO NOT handle the AC power cord with wet hands.

  • Moisture condensation Moisture may condense on the lenses inside the unit in the following cases:
  • After starting to heat the room.
  • In a damp room.
  • If the unit is brought directly from a cold to a warm place. Should this occur, the unit may malfunction. In this case, leave the unit turned on for a few hours until the moisture evaporates, unplug the AC power cord, then plug it in again.

Gives you warning and caution to prevent damage or risk of fire/electric shock. In addition, we put information here about conditions which will prevent getting the best possible performance from the unit.

  • Others
  • Should any metallic object or liquid fall into the unit, unplug the AC power cord and consult your dealer before operating any further.
  • If you are not going to operate the unit for an extended period of time, unplug the AC power cord from the wall outlet.
  • Rating label is placed on the exterior of the bottom.

Gives you information and hints you need to know.

DO NOT disassemble the unit since there are no user serviceable parts inside.

Precautions

If anything goes wrong, unplug the AC power cord and consult your dealer.

  • Installation
  • Install in a place which is level, dry and neither too hot nor too cold—between 5˚C and 35˚C.
  • Install the unit in a location with adequate ventilation to prevent internal heat buildup.
  • Leave sufficient distance between the unit and the TV.
  • Keep the speakers away from the TV to avoid interference with TV.

DO NOT install the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

Page 5 of the JVC CA-FSH300 user manual — Introduction
Page 5 · click to enlarge
Page 5
Page 5 of the JVC CA-FSH300 user manual — Introduction
Page 6 of the JVC CA-FSH300 user manual — Main Unit
Page 6 · click to enlarge
Page 6

Location of the Buttons and Controls

Become familiar with the buttons and controls on your unit.

Main Unit

JVC CA-FSH300 — Main Unit diagram (page 6)
Fig. 3 · Main Unit

D A I L Y T I M E R / S N O O Z E

A U T O R E V E R S E

Page 7 of the JVC CA-FSH300 user manual — Main unit
Page 7 · click to enlarge
Page 7
JVC CA-FSH300 — Display window diagram (page 7)
Fig. 4 · Display window

4 5 23 1 6 7 8 9 p q

SLEEP SNOOZE REC ST MP3 MONO SOUND BASS REC

See pages in parentheses for details.

Main unit

Display window

  • 1 Disc cover (10) 2 ) OPEN (disc cover open) (10) 3 DAILY TIMER/SNOOZE button (20) 4 Remote sensor (5) 5 STANDBY lamp (8) 6 (STANDBY/ON) button (8) 7 Source buttons
  • CD #¥8 , TAPE ¤‹ , FM/AM, AUX Pressing one of these buttons also turns on the unit. 8 PHONES jack (9) 9 Multi control buttons
  • DOWN 4 , 7 , UP ¢ p Cassette holder (14, 17, 18) q Display window w VOLUME + / – control (9) e AUX jack (7, 17) r REC button (17, 18) t PUSH OPEN button (14, 17)

1 DAILY 1/2/3 (timer number) indicator 2 (timer) indicator 3 ON/OFF (timer on-time/off-time) indicators 4 REC (recording timer) indicator 5 (group folder) indicator 6 SLEEP indicator 7 SNOOZE indicator 8 FM mode indicators • MONO, ST (stereo) 9 MP3 indicator p SOUND indicator q BASS indicator w REC (recording) indicator e 2 3 (tape direction) indicator r Repeat indicators

  • , ALL, GR. ( group ) t (reverse mode) indicator y PRGM (program) indicator u RANDOM indicator i Main display o Remain indicators
  • TOTAL , REMAIN ; A.STANDBY indicator a Frequency indicators
  • MHz , kHz

Continued

Page 8 of the JVC CA-FSH300 user manual — Remote Control
Page 8 · click to enlarge
Page 8

Remote Control

See pages in parentheses for details.

JVC CA-FSH300 — Remote Control diagram (page 8)
Fig. 5 · Remote Control
  • 1 STANDBY/ON button (8, 20) 2 SLEEP button (21) 3 CLOCK/TIMER button (8, 19) 4 SET button (8, 15, 19, 20) 5 CANCEL button (19, 20) 6 Source buttons
  • CD 3¥8 , TAPE 2 3 , FM/AM, AUX Pressing one of these buttons also turns on the unit. 7 RANDOM button (13) 8 PROGRAM button (11, 12) 9 Multi control buttons
  • PRESET GROUP /UP, PRESET GROUP /DOWN
  • 4 , 7 , ¢ p SOUND/HBS button (9) q BEAT CUT button (17) w DISPLAY button (9) e A. (auto) STANDBY button (8) r FM MODE button (15) t Number buttons (11, 15, 16) y OVER button (11, 15, 16) u REMAIN button (13) i REPEAT button (12) o VOLUME + / – buttons (9, 20) ; FADE MUTING button (9) a REV. (reverse) MODE button (14, 17, 18)
JVC CA-FSH300 — Remote Control diagram (page 8)
Fig. 6 · Remote Control

When using the remote control, point it at the remote sensor on the front panel.

Page 9 of the JVC CA-FSH300 user manual — Connecting AM and FM Antennas
Page 9 · click to enlarge
Page 9

Getting Started

Do not connect the AC power cord until all other connections have been made. Continued

Unpacking

Connecting Speakers

  • After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.
  • AM loop antenna (1)
  • Remote control (1)
  • Batteries (2) If any item is missing, consult your dealer immediately.

You can connect the speakers using the speaker cords.

JVC CA-FSH300 — Unpacking diagram (page 9)
Fig. 7 · Unpacking

Connecting AM and FM Antennas

JVC CA-FSH300 — Connecting AM and FM Antennas diagram (page 9)
Fig. 8 · Connecting AM and FM Antennas

1 Connect the supplied AM loop antenna to the AM LOOP terminal. Place the antenna away from the unit and adjust its position for the best reception.

1 Hold the clamp of the speaker terminal.

2 Insert the end of the speaker cord into the terminal. Match the polarity of the speaker terminals: red cord to ª and black cord to ·.

2 Adjust the position for the FM antenna for the best reception.

3 Release your finger from the clamp.

  • For better reception of both FM and AM
  • Make sure the antenna conductors do not touch any other terminals or connecting cords.
  • Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.
JVC CA-FSH300 — Connecting AM and FM Antennas diagram (page 9)
Fig. 9 · Connecting AM and FM Antennas
  • IMPORTANT:
  • Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
  • DO NOT connect more than one speaker to one speaker terminal.
Page 10 of the JVC CA-FSH300 user manual — Connecting Other Equipment
Page 10 · click to enlarge
Page 10

Do not connect the power cord until all other connections have been made.

To remove the speaker grilles The speaker grilles are removable as the illustration below.

Putting the Batteries into the Remote Control

Insert the batteries—AAA/UM-4/R03—into the remote control by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

JVC CA-FSH300 — Putting the Batteries into the Remote Control diagram (page 10)
Fig. 10 · Putting the Batteries into the Remote Control
JVC CA-FSH300 — Putting the Batteries into the Remote Control diagram (page 10)
Fig. 11 · Putting the Batteries into the Remote Control

To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you while holding the side. Do the same for the rest of projections one at a time.

To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.

Connecting Other Equipment

To connect an audio equipment You can connect audio equipment—used only as a playback device.

  • DO NOT connect any equipment while the power is on.
  • DO NOT plug in any equipment until all connections are complete.

For playing other equipment through this unit, connect between the audio output jacks on the other equipment and AUX jack by using audio cords with mini plugs (not supplied).

JVC CA-FSH300 — Connecting Other Equipment diagram (page 10)
Fig. 12 · Connecting Other Equipment
  • DO NOT use an old battery together with a new one.
  • DO NOT use different types of batteries together.
  • DO NOT expose batteries to heat or flame.
  • DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, the remote control will be damaged from battery leakage.

NOW you are ready to plug in the unit.

When the audio equipment has pin jacks for audio output: Be sure that the pin plugs of the audio cords are colored— white plugs and jacks are for left audio signals, and red ones for right audio signals.

Page 11 of the JVC CA-FSH300 user manual — A. STANDBY
Page 11 · click to enlarge
Page 11

Common Operations

Setting the Clock

To adjust the clock

On the remote control ONLY: 1 Press CLOCK/TIMER repeatedly to show the current time indication. The hour indication and AM (or PM) start flashing. 2 Repeat steps 2 and 3 on the left column.

Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “AM 12:00” starts flashing on the display. You can set the clock when the unit is either turned on or in standby mode.

CLOCK /TIMER

On the remote control ONLY: 1 Press CLOCK/TIMER. The hour indication and AM (or PM) start flashing.

CLOCK /TIMER

Turning On the Power

To turn on the unit, press STANDBY/ON . The STANDBY lamp on the unit goes off. • When you press the source button—CD 3/8, TAPE 2 3, FM/AM and AUX, the unit automatically turns on.

STANDBY/ON

2 Press UP or DOWN to adjust the hour, then press SET. • When you press and hold UP or DOWN, the hour indication changes continuously. The minute indication starts flashing.

DOWN PRESET GROUP

  • To turn off the unit (standby), press STANDBY/ON again. The STANDBY lamp on the unit lights red.
  • “AM 12:00” flashes on the display until you set the built-in clock. After setting the clock, the clock time will appear on the display while the unit is in standby mode.
  • A little power is always consumed even while the unit is in standby mode.

SET

  • The clock is working even while setting. 3 Press UP or DOWN to adjust the minute, then press SET.
  • When you press and hold UP or DOWN, the minute indication changes continuously. The built-in clock starts.

To switch off the power supply completely, unplug the AC power cord from the AC outlet.

DOWN PRESET GROUP

Turning Off the Unit Automatically (Auto Standby)

Using Auto Standby, the unit automatically turns itself off (on standby) about 3 minutes after playing back a disc or a tape. • You can also turn off the unit automatically by using the Sleep Timer. (See page 21.)

SET

On the remote control ONLY:

To activate Auto Standby, press A.STANDBY. The A.STANDBY indicator appears on the display. • When the playback is stopped, the A.STANDBY indicator starts flashing on the display.

A. STANDBY

  • When you unplug the AC power cord or if a power failure occurs The clock is reset to “AM 12:00.” If this happens, set the clock again.
  • The clock may gain or lose 1 to 2 minutes per month If this happens, reset the clock.

To deactivate Auto Standby, press A.STANDBY again. The A.STANDBY indicator goes off.

Continued

Page 12 of the JVC CA-FSH300 user manual — DISPLAY
Page 12 · click to enlarge
Page 12

Selecting the Source

Selecting the Sound Modes

To select the source, press CD 6, TAPE 2 3, FM/AM, or AUX. • When you select CD as the source, playback starts automatically. To operate the CD player, see pages 10 to 13. To operate the tape deck, see page 14. To operate the tuner (FM or AM), see pages 15 and 16. To record on a tape, see pages 17 and 18. To use an external equipment, see page 16.

  • You can select one of the 4 sound modes.
  • This function also affects the sound from headphones.
  • This function only affects the playback sound, and does not affect your recording.

On the remote control ONLY:

To select the sound modes, press SOUND/HBS repeatedly. • Each time you press the button, the sound mode changes as follows:

SOUND/HBS

Adjusting the Volume

ROCK

CLASSIC POP

JAZZ FLAT

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOL MIN,” “VOL 1” – “VOL 29,” and “VOL MAX.” • The volume level has no effect on recording.

ROCK: Powerful sound emphasizing treble and bass. POP: More presence in the vocals and midrange. CLASSIC: Enriched sound with fine treble and ample bass. JAZZ: Accented lower frequencies for jazz-type music. FLAT: Equalizer effect is canceled.

To increase the volume, press VOLUME + (or turn VOLUME control clockwise on the unit). To decrease the volume, press VOLUME – (or turn VOLUME control counterclockwise on the unit). • When you press and hold either button, you can change the volume level continuously.

VOLUME

SOUND

When the sound mode is activated, the SOUND indicator lights up on the display.

Reinforcing the Bass Sound

You can boost the bass sound. • This function only affects the playback sound, and does not affect your recording.

For private listening Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

On the remote control ONLY:

JVC CA-FSH300 — On the remote control ONLY: diagram (page 12)
Fig. 13 · On the remote control ONLY:

Press and hold SOUND/HBS. • Each time you press and hold the SOUND/ HBS, HBS turns on and off.

DO NOT turn off (standby) the unit with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source. REMEMBER you cannot adjust the volume level while the unit is in standby mode.

SOUND/HBS

BASS

When the HBS is activated, the BASS indicator lights up on the display.

Fade-Out Muting (FADE MUTING)

Checking the Clock Time During Play

On the remote control ONLY:

On the remote control ONLY:

Press FADE MUTING. The volume level decreases to “VOL MIN,” and “MUTING” appears on the display.

FADE MUTING

Press DISPLAY. • Each time you press the button, the display changes the clock indication and the normal indication alternately. After changing the display to the clock indication, operating any button or control also changes the display to the normal indication.

DISPLAY

To release muting, press FADE MUTING again. The volume level resumes to the previous level.

(Canceled)

Page 13 of the JVC CA-FSH300 user manual — MP3
Page 13 · click to enlarge
Page 13

Playing Back Discs

This unit has been designed to play back the following discs—CD, CD-R, and CD-RW. You can play back the discs containing the tracks in music CD format or MP3 files in ISO 9660 format. • In this instruction, we call a disc recorded MP3 files “MP3 disc,” and “file” is also referred to as “track.”

Playing Back the Entire Disc—Normal Play

1 Press ) OPEN on top of the unit. The disc cover opens. • You can insert a disc while listening to another source. 2 Place a disc correctly with its label side up.

  • When playing CD-Rs or CD-RWs
  • Before playing CD-Rs or CD-RWs, read their instructions or cautions carefully.
  • User-edited CD-Rs (CD-Recordable) and CD-RWs (CDReWritable) can be played only if they are already “ finalized .”
  • This unit supports “multi-session” discs (up to 5 sessions).
  • This unit cannot play “packet write” discs.
  • Some CD-Rs or CD-RWs may not play on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.
  • CD-RWs may require a longer readout time. This is because the reflectance of CD-RWs is lower than for regular discs.
JVC CA-FSH300 — Playing Back the Entire Disc—Normal Play diagram (page 13)
Fig. 14 · Playing Back the Entire Disc—Normal Play

3 Close the disc cover gently. 4 Press CD 6. The unit automatically turns on and the source changes to the CD player. After loading the disc, the first track of the disc starts playing.

CD 3 / 8

JVC CA-FSH300 — CD 3 / 8 diagram (page 13)
Fig. 15
  • Notes for MP3 files
  • The player can only recognize files with “MP3” or “mp3” as the extensions, which can be in any combination of upper and lower case. The file name needs to be up to 20 characters.
  • This unit recognizes files and folders on a disc in the following conditions: – up to 640 MP3 files. – up to 256 folders (including the root folder). – up to 8th layers (including the root folder).
  • It is recommended that you record your material at a 44.1 kHz sampling rate, using the 128 kbps data transfer rate.
  • Some MP3 files or discs may not be played back because of their characteristics or recording conditions.
  • MP3 discs requires a longer readout time than normal discs because of the complexity of the folder/file configuration.
  • MP3i and MP3 Pro are not available.

When playing MP3 disc:

MP3

  • The disc automatically stops when the last track has finished playing.

While “READING” appears on the display You cannot make any operation until the unit finishes reading the disc.

While playing back an MP3 disc ID3 Tag information (the name of the title, artist, and album up to 30 characters) will be shown on the display. When the name is too long to be displayed at once, it is scrolled.

  • General notes In general, you will have the best performance by keeping your discs and the mechanism clean.
  • Store discs in their cases, and keep them in cabinets or on shelves.
  • Keep the unit’s disc cover closed when not in use.
  • Continued use of irregular shape discs (heart-shape, octagonal, etc.) can damage the unit.

To stop playing, press 7. The total track (or group) number and total playing time appear on the display.

When stop playing MP3 discWhen stop playing audio CD:

MP3

  • Total playing time does not appear when MP3 disc is loaded.
Show 9 more labels / short text on this page
Continued · MP3 indicator · Current track number · Elapsed playing time · Group folder indicator · Total track number · Total playing time · Total group number · Total track number
Page 14 of the JVC CA-FSH300 user manual — OVER
Page 14 · click to enlarge
Page 14

To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’s pivot lightly.

To locate a particular point in a track During play, press and hold ¢ or 4 (or UP ¢ or DOWN 4 on the unit).

  • ¢ (UP ¢ ): Fast-forwards the tracks.
  • 4 (DOWN 4 ): Fast-reverses the tracks.
  • If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start.
  • If no disc is inserted “NO DISC” appears on the display.

While playing back an MP3 disc This function is not available.

DO NOT open the disc cover by hand as it will be damaged.

Programming the Track Playing Order —Program Play

Basic Disc Operations

You can arrange the order in which tracks play before you start playing. You can program up to 40 tracks.

While playing a disc, you can do the following operations.

On the remote control ONLY: 1 Place a disc. • If the current source is not the CD player, press CD 6, then 7 before going to the next step. 2 Press PROGRAM. The PRGM (program) indicator appears on the display.

To stop playing for a moment During play, press CD 3/8. While pausing, current track number and elapsed playing time flash on the display.

CD 3 / 8

To resume playing, press CD 3/8 again.

PROGRAM

To go to another track Before or during play, press ¢ or 4 (or UP ¢ or DOWN 4 on the unit) repeatedly.

PRGM

  • ¢ (UP ¢ ): Skips to the beginning of the next or succeeding tracks.
  • 4 (DOWN 4 ): Goes back to the beginning of the current or previous tracks.

3 Press ¢ or 4 to select the track number, then press PROGRAM.

To go to another track directly using the number buttons

PROGRAM

On the remote control ONLY: Pressing the number button(s) before or during play allows you to start playing the track number you want. Ex.: For track number 5, press 5.

PRGM

You can also use the number button(s) to select a track number. • For the operation of the number buttons, see “To go to another track directly using the number buttons” on the left column.

For track number 15, press OVER, then press 1, 5. For track number 20, press OVER, then press 2, 0. (For MP3 disc only) For track number 20, press OVER, then press 0, 2, 0. For track number 156, press OVER, then press 1, 5, 6.

OVER

OVER

When you are programming from MP3 disc Pressing PRESET GROUP or PRESET GROUP selects the first track of each group.

Program step number · Track number

Page 15 of the JVC CA-FSH300 user manual — REPEAT
Page 15 · click to enlarge
Page 15

4 Repeat step 3 to program other tracks you want. 5 Press CD 3/8. The tracks are played in the order you have programed.

Repeating Tracks—Repeat Play

You can have all the tracks, the program or individual track currently playing, repeat as many times as you like.

CD 3 / 8

On the remote control ONLY:

Press REPEAT repeatedly before or during playback. • Each time you press the button, Repeat Play changes as follows, and the following repeat indicators light up on the display:

REPEAT

If you try to program a 41st track “– – FULL – –” will appear on the display.

To stop playing, press 7.

ALL

When playing back audio CD:

To check the program contents You can check the program contents by pressing PROGRAM repeatedly before or after playback.

PROGRAM

ALL

ALL: In Normal Play, repeats all the tracks.

To modify the program Press PROGRAM repeatedly until the program step number you want to modify appears. Then follow step 3 of the programming procedure. • Pressing 0 deletes the selected step.

In Program Play, repeats all the tracks in the program. : Repeats one track.

PROGRAM

When playing back MP3 disc:

ALL GR.

To add tracks in the program, press PROGRAM repeatedly until “0” appears as the track number. Then follow steps 3 of the programming procedure.

PROGRAM

ALL: In Normal Play, repeats all the tracks.

In Program Play and Random Play, repeats all the tracks in the program. GR.: In Normal Play, repeats all the tracks in a

To clear the program Press 7 before or after playback. The PRGM indicator disappears from the display and all the memory contents will be erased (resumes to Normal Play). • The programmed tracks are also erased in the following cases: – Pressing ) OPEN to open the disc cover. – Turning off the unit. – Changing the source.

group. In Program Play and Random Play, this function is not available. : Repeats one track. In Random Play, this function is not available.

To cancel Repeat Play, press REPEAT repeatedly until the repeat indicator goes off.

REPEAT

During Program Play Auto Standby function does not take effect.

Show 4 more labels / short text on this page
Continued · Repeat indicators · Canceled · Canceled
Page 16 of the JVC CA-FSH300 user manual — TOTAL REMAIN
Page 16 · click to enlarge
Page 16

Playing at Random—Random Play

Displaying the Remaining Time during Playback

You can play the tracks at random.

You can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing.

On the remote control ONLY:

Press RANDOM. The RANDOM indicator lights up on the display.

RANDOM

On the remote control ONLY:

Press REMAIN repeatedly.

REMAIN

When playing back audio CD:

RANDOM

  • Each time you press the button, the display changes as follows, and the following remain indicators light up on the display:

To exit from Random Play, press 7 or RANDOM. The RANDOM indicator goes off. • It is not possible to activate the Random Play function during Program Play.

TOTAL REMAIN

REMAIN TOTAL REMAIN *

REMAIN: Shows the remaining time of the current track. TOTAL REMAIN: Shows the remaining time of the disc. No indication: Shows the elapsed time of the current track.

* Remaining time of the disc (TOTAL REMAIN) will not be displayed in the following cases: – During Random Play. – During Program Play.

When playing back MP3 disc:

  • Each time you press the button, the display changes as follows:

ID3 Tag information*

Folder name**/file name

* ID3 Tag information shows the name of the title, artist, and album in sequence. If the file does not have any information, “NO INFO” appears.

** When a file does not belong in any folder, “ROOT” appears.

Remain indicators · (No Indication) · Normal indication

Page 17 of the JVC CA-FSH300 user manual — TAPE
Page 17 · click to enlarge
Page 17

Playing Back Tapes

Playing Back a Tape

If no cassette is inserted when you press TAPE ¤ ‹ “NO TAPE” appears on the display.

You can play back type I tapes only. 1 Press PUSH OPEN. The cassette holder opens.

To stop playing, press 7.

JVC CA-FSH300 — Playing Back a Tape diagram (page 17)
Fig. 16 · Playing Back a Tape

To fast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DOWN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display.

2 Put a cassette in with the exposed part of the tape down.

JVC CA-FSH300 — Playing Back a Tape diagram (page 17)
Fig. 17 · Playing Back a Tape

To remove the cassette, press PUSH OPEN on the unit while playback is stopped.

PUSH OPEN

3 Close the cassette holder gently.

To play both sides—Reverse Mode You can set the deck to play just one side of a tape, both sides once, or both sides continuously.

JVC CA-FSH300 — PUSH OPEN diagram (page 17)
Fig. 18

On the remote control ONLY:

Press REV.MODE (reverse mode). • Each time you press the button, the Reverse Mode changes as follows:

REV.MODE

: The deck automatically stops after playing both

  • When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display. 4 Press TAPE ¤ ‹ . Playback starts (if the unit has been on standby, the unit automatically turns on). The tape direction indicator ( 3 or 2 ) starts flashing slowly on the display.
  • Each time you press the button, the tape direction changes: 3 : plays the front side. 2 : plays the reverse side. When the tape plays to the end, the deck automatically stops if the Reverse Mode is set to or . (See “To play both sides—Reverse Mode.”)

sides of the tape. Stops when playback in the 2 directions are finished. : The deck continues to play both sides of the tape 10

TAPE

times, then stops playback automatically. : The deck automatically stops after playing one side of the tape.

JVC CA-FSH300 — TAPE diagram (page 17)
Fig. 19
  • DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.
  • The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.
  • This unit is not compatible with type II and type IV tapes.

4 7 ¢ · 4 7 ¢

Page 18 of the JVC CA-FSH300 user manual — OVER
Page 18 · click to enlarge
Page 18

Listening to FM and AM Broadcasts

Tuning in to a Station

Presetting Stations

You can preset 25 FM and 15 AM stations manually.

1 Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM.

FM/AM

In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

  • There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2 .
  • If the station previously selected is stored in a preset number, the preset number will appear instead of “FM” or “AM.” 2 Press and hold ¢ or 4 (or UP ¢ or DOWN 4 on the unit) for more than 1 second.

On the remote control ONLY: 1 Tune in to the station you want to preset. • See “Tuning in to a Station” on the left column. 2 Press SET. “00” starts flashing on the display.

SET

  • ¢ (UP ¢ ): Increases the frequencies.
  • 4 (DOWN 4 ): Decreases the frequencies.

The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in. • If an FM program is broadcast in stereo, the ST (stereo) indicator lights up on the display (only when the reception is good).

PRGM

3 Press PRESET GROUP or PRESET GROUP to select a preset number, then press SET. The preset station is stored in memory. • Even if you do not press SET, the station will automatically be stored on the selected preset number 5 seconds later.

To stop during searching, press ¢ or 4 (or UP ¢ or DOWN 4 on the unit).

When you repeatedly press ¢ or 4 (or UP ¢ or DOWN 4 on the unit) The frequency changes step by step.

PRGM

To change the FM reception mode On the remote control ONLY:

You can also use the number button(s) to select a preset number. • In this case, you do not have to press SET. Ex.: To select a preset number 5,

When an FM stereo broadcast is hard to receive or noisy, press FM MODE so that the “MONO” appears on the display. The MONO indicator also lights up. Reception will improve.

FM MODE

press 5. To select a preset number 15, press OVER, then press 1, 5. To select a preset number 20, press OVER, then press 2, 0. 4 To preset more stations, repeat steps 1 to 3 above, allocating a different preset number to each station. • Storing a new station on an already assigned number erases the previously stored one.

OVER

  • To restore the stereo effect, press FM MODE again so that “STEREO” appears on the display and the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast. The stereo effect also restores when:
  • Changing the band (FM or AM).
  • Changing the station frequency.
  • Changing the playing source.
  • Turning off (or on) the unit.

When you unplug the AC power cord or if a power failure occurs The preset stations will remain in the unit.

MHz · MHz · MHz

Page 19 of the JVC CA-FSH300 user manual — AUX
Page 19 · click to enlarge
Page 19

Tuning in to a Preset Station

To tune in to a preset station directly using the number buttons

On the remote control ONLY: 1 Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. 2 Press PRESET GROUP or PRESET GROUP repeatedly to select a preset number.

On the remote control ONLY:

FM/AM

Pressing the number button(s) allows you to select the preset number you want. Ex.: For preset number 5, press 5.

For preset number 15, press OVER, then press 1, 5. For preset number 20, press OVER, then press 2, 0.

OVER

Using an External Equipment

Listening to the External Equipment

To exit AUX mode, select other source.

You can listen to the external equipment such as MD recorder, cassette deck, or other auxiliary. • First, make sure that the external equipment is properly connected to the unit. (See page 7.) 1 Set the volume level to the minimum position. 2 Press AUX. “AUX” appears on the display.

For operation of the external equipment Refer to its instructions.

AUX

3 Start playing the external equipment. 4 Adjust the volume level to the level you want to listen to.

Page 20 of the JVC CA-FSH300 user manual — BEAT CUT
Page 20 · click to enlarge
Page 20

Recording

  • IMPORTANT:
  • It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
  • The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.
  • If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit.
  • You can only use type I tape for recording.
  • 3 Start playing the source—FM, AM, or auxiliary equipment connected to AUX jack.
  • When the source is FM or AM, tune in to the station you want to record.
  • When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 18. 4 Press REC (recording).
  • The REC indicator appears and 3 indicator lights up on the display.

REC

REC

JVC CA-FSH300 — REC diagram (page 20)
Fig. 20
  • DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.
  • DO NOT use type II and type IV tapes since the unit is not compatible with such tapes.
  • The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

5 Press TAPE ¤ ‹. 3 indicator starts flashing and the recording starts.

TAPE

  • If no cassette is inserted when you press REC “NO TAPE” appears on the display.

At the start and end of cassette tapes There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music.

  • If a protected tape is inserted when you press REC “PROTECT” appears on the display.

To stop recording for a moment, press REC. The recording is paused. To resume recording, press TAPE ¤ ‹.

REC

To protect your recordings Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape.

To stop recording, press 7. The recording stops.

To remove the cassette, press PUSH OPEN while recording is stopped.

PUSH OPEN

To record on both sides—Reverse Mode

On the remote control ONLY: Press REV.MODE (reverse mode) until

REV.MODE

or is lit. • When using the Reverse Mode for recording, lights up and start recording in the forward ( 3 ) direction first.

Recording on a Tape

On the unit ONLY: 1 Put a recordable cassette in with the exposed part of the tape down. • See also page 14. 2 Close the cassette holder gently.

To cancel the Reverse Mode, press REV.MODE repeatedly until is lit.

To reduce the beat—Beat Cut On the remote control ONLY:

If the beats are heard while recording an AM broadcast, press BEAT CUT repeatedly until the beats are reduced. • Each time you press the button, the display alternates between “CUT-1” and “CUT-2.”

BEAT CUT

MHz · 4 7 ¢ · Adhesive tape

Page 21 of the JVC CA-FSH300 user manual — TAPE
Page 21 · click to enlarge
Page 21

Recording Discs —Disc Synchronized Recording

To stop recording for a moment, press REC. Both the CD playback and tape recording are paused. To resume recording, press TAPE ¤ ‹.

REC

You can start disc play and recording at the same time.

To stop recording, press 7. The recording stops and the CD playback is paused.

On the unit ONLY: 1 Put a recordable cassette in with the exposed part of the tape down. • See also page 14. 2 Close the cassette holder gently.

To record on both sides—Reverse Mode

On the remote control ONLY: Press REV.MODE (reverse mode) repeatedly until or is lit. • When using the Reverse Mode for Disc Synchronized Recording, lights up and the recording starts in the forward ( 3 ) direction first. When the tape reaches its end, the CD playback is paused until the tape recording changes to the reverse direction, then the recording continues.

3 Press CD ‹/8 to select the CD player as the source.

CD

REV.MODE

4 Press 7 to stop the disc playback. • You can make a program (see page 11) if you want. 5 Press REC (recording). 3 indicator lights up on the display.

To cancel the Reverse Mode, press REV.MODE repeatedly until is lit.

REC

REC

When making Sleep Timer settings while doing Disc Synchronized Recording Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.

6 Press TAPE ¤ ‹. “SYNC REC” appears and 3 indicator starts flashing slowly on the display. CD playback and tape recording starts automatically.

TAPE

REC

  • If no cassette is inserted when you press REC “NO TAPE” appears on the display.
  • If a protected tape is inserted when you press REC “PROTECT” appears on the display.

4 7 ¢ · #/8 · 4 7 ¢

Page 22 of the JVC CA-FSH300 user manual — Using Daily Timer and Recording Timer
Page 22 · click to enlarge
Page 22

Using the Timers

On the remote control ONLY: 1 Press CLOCK/TIMER repeatedly to select the timer you want to adjust and activate—Daily 1, Daily 2, Daily 3, or Rec. The timer setting and hour indication start flashing on the display. Each time you press the button, the display changes as follows:

There are four timers available—Daily Timer, Recording Timer, Snooze Timer, and Sleep Timer. • Before using these timers, make sure the built-in clock is set correctly (see page 8).

CLOCK /TIMER

JVC CA-FSH300 — CLOCK /TIMER diagram (page 22)
Fig. 21

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

How the Timer actually works When the on-time comes, the unit automatically turns on (the

  • [timer] indicator flashes and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (standby). The timer setting remains in memory until you change it.
  • When the (timer) and DAILY 1 , 2 , or 3 indicators are lit on the display, the timer acts as the Daily Timer. Once the timer has been set, it will be activated at the same time and automatically turns off (standby) after 60 minutes everyday until the timer is deactivated.
  • When the (timer) and the REC indicators are lit on the display, the timer acts as the Recording Timer. After the timer-recording finishes, the details of the setting remain stored but the timer is turned off.

Before you start... When using “TUNER” as the source to play, make sure to select the desired station before turning off the power. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1.

2 Set the on-time you want the unit to turn on. (1) Press UP or DOWN to set the hour,

JVC CA-FSH300 — Using Daily Timer and Recording Timer diagram (page 22)
Fig. 22 · Using Daily Timer and Recording Timer

then press SET. (2) Press UP or DOWN to set the minute,

then press SET. If you want to change the time setting, press CANCEL.

  • If you are setting the Daily Timer, the source name starts flashing on the display. \ Go to step 4 .
  • If you are setting the Recording Timer, the OFF indicator and hour indication start flashing on the display.
Show 4 more labels / short text on this page
Daily 1 Timer · Daily 2 Timer · Daily 3 Timer · Rec Timer
Page 23 of the JVC CA-FSH300 user manual — On the unit ONLY:
Page 23 · click to enlarge
Page 23

3 For the Recording Timer ONLY: Set the off-time you want the unit to turn off.

To deactivate the timer, press and hold DAILY TIMER/SNOOZE. • Each time you press and hold the button, the timer setting changes as follows:

REC

JVC CA-FSH300 — REC diagram (page 23)
Fig. 23

OFF

DAILY 1 DAILY 2 DAILY 3

(1) Press UP or DOWN to set the hour,

To change the timer, repeat steps 1 to 6 on pages 19 and this page. • To activate the Daily Timer again without changing the setting, press DAILY TIMER/SNOOZE on the unit repeatedly to select the timer number you want.

then press SET. (2) Press UP or DOWN to set the

minute, then press SET. If you want to change the time setting, press CANCEL. • The Recording Timer is activated. The (timer) and REC indicators light up. The display returns to the normal indication. \ Go to step 7. 4 Press UP or DOWN to select the source to play.

When there is no playing source (either a cassette tape or a disc) inside when you select “TAPE” or “CD” The source to play is changed to “TUNER” when the on-time comes.

If the unit is already turned on when the timer on-time comes The timer does not work.

When you unplug the AC power cord or if a power failure occurs The timer setting remains. Set the built-in clock and activate the timer again.

DAILY 1

Each time you press the button, the source changes as follows:

TUNER TAPE CD

Using Snooze Timer

  • Make sure the playing source (either a cassette tape or a disc) is inside when you select “TAPE” or “CD.”

The Snooze Timer turns off the unit (standby) only for 5 minutes while Daily Timer is in operation. • You can set the Snooze Timer only while the Daily Timer is in operation.

If you want to change the time setting, press CANCEL repeatedly to return step 2. 5 Press SET. The (timer) and active daily timer number indications lights up. The display returns to the normal indication. 6 Press VOLUME +/– to adjust the volume for the on-time.

SET

On the unit ONLY:

Press DAILY TIMER/ SNOOZE while Daily Timer is in operation. The unit turns off (standby) and the SNOOZE indicator appears on the display. After 5 minutes, the unit automatically turns on with the source you selected in step 4 on the left column.

VOLUME

7 Press STANDBY/ON to turn off the unit if you have set the timer with the unit turned on.

STANDBY/ON

If the unit is turned on when the Snooze Timer is working Both Snooze Timer and Daily Timer will be canceled.

On the unit ONLY:

If you set the Snooze Timer when there is less than 5 minutes until the Daily Timer off-time The unit will not turn on even when 5 minutes passed.

To activate the timer, press and hold DAILY TIMER/SNOOZE on the unit repeatedly to select the timer number you want.

When you unplug the AC power cord or if a power failure occurs The timer will be canceled. You need to set the clock first, then the timer again.

Continued · REC Canceled

Page 24 of the JVC CA-FSH300 user manual — 90 OFF
Page 24 · click to enlarge
Page 24

Using Sleep Timer

When you set the Sleep Timer after the Daily Timer starts playing the selected source The unit turns off with either timer having an earlier shut-off time.

  • With Sleep Timer, you can fall asleep to your favorite music or radio program.
  • You can set Sleep Timer only when the unit is turned on.
  • You can also turn off the unit automatically by using Auto Standby. (See page 8.)

If you set the Sleep Timer while playing back or recording a tape Do not shut the unit off with the Sleep Timer while a tape is running. If the unit turns off while playing back or recording a tape, the cassette deck or tapes may be damaged.

How the Sleep Timer actually works The unit automatically turns off after the specified length of time passes.

On the remote control ONLY: 1 Press SLEEP. The SLEEP indicator starts flashing on the display.

SLEEP

SLEEP

  • Each time you press the button, the length of time changes as follows:

90 OFF

2 Wait for about 5 seconds after specifying the length of time. The SLEEP indicator remains lit on the display.

To check the remaining time until shut-off time, press SLEEP once. The remaining time until shut-off time appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the length of time you want appears.

To cancel the setting, press SLEEP repeatedly until the SLEEP indicator goes off and display returns to the normal indication. • Turning off the unit also cancels the Sleep Timer.

(canceled)

Page 25 of the JVC CA-FSH300 user manual — Handling discs
Page 25 · click to enlarge
Page 25

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

General Notes In general, you will have the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Handling cassette tapes

  • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
  • If the tape is loose, it may get stretched, cut, or caught in the cassette.
  • Cleaning the unit
  • Stains on the unit Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.
  • Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following: – DO NOT wipe it with a rough cloth. – DO NOT wipe it too vigorously. – DO NOT wipe it with thinner or benzine. – DO NOT apply any volatile substance such as an
  • Be careful not to touch the tape surface.
  • Avoid storing tapes in any of the following places: – In dusty places – In direct sunlight or heat – In moist areas – On a TV or speaker – Near a magnet

insecticide to it. – DO NOT allow any rubber or plastic to remain in contact

  • To keep the best recording and playback sound quality You need to clean the heads.
  • Clean the heads after every 10 hours of use with a wet-type head cleaning tape (available at electronic and audio shops). When the head becomes dirty, the following symptoms will occur: – Sound quality is reduced. – Sound level decreases. – Sound drops out.
  • Do not play dirty or dusty tapes.
  • Do not touch the highly-polished head with any metallic or magnetic tools.

with it for a long time.

Handling discs

  • Remove the disc from its case by holding it at the edge while pressing the center hole lightly.
  • Do not touch the shiny surface of the disc, or bend the disc.
  • Put the disc back in its case after use to prevent warping.
  • Be careful not to scratch the surface of the disc when placing it back in its case.
  • Avoid exposure to direct sunlight, temperature extremes, and moisture.
JVC CA-FSH300 — Handling discs diagram (page 25)
Fig. 24 · Handling discs

To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge.

To demagnetize the head Turn off the unit, and use a head demagnetizer (available at electronic and audio shops).

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

Capstan · Head · Pinch Roller

Page 26 of the JVC CA-FSH300 user manual — Symptom
Page 26 · click to enlarge
Page 26

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service.

Symptom

Possible Cause

Action

Power does not come on.

The power cord is not connected to an AC outlet.

Insert the plug into the socket.

No sound is heard.

  • Connections are incorrect or loose.
  • Check all connections and make corrections. (See pages 6 and 7.)
  • Unplug the headphones from the PHONES jack.
  • It cannot be played. Replace the disc.
  • A pair of headphones is connected.
  • MP3 disc is recorded with “packet writing.”

Hard to listen to broadcasts because of noise.

  • Antennas are disconnected.
  • Reconnect the antenna correctly and securely.
  • Change the position and direction of the AM loop antenna.
  • Extend FM antenna and orient to the best reception position.
  • The AM loop antenna is too close to the unit.
  • The FM antenna is not properly extended and positioned.

The disc does not play.

The disc is upside down.

Put the disc in with the label side up.

Impossible to record.

Small tabs on the back of the cassette are removed.

Cover the holes with adhesive tape.

Operations are disabled.

The built-in microprocessor has malfunctioned due to external electrical interference.

Unplug the AC power cord then plug it back in.

Unable to operate the unit by the remote control.

  • The path between the remote control and the remote sensor on the unit is blocked.
  • The batteries are exhausted.
  • You are using the remote control too far from the unit.
  • Remove the obstruction.
  • Replace the batteries. (See page 7.)
  • Signals cannot reach the remote sensor. Move closer to the unit.
Page 27 of the JVC CA-FSH300 user manual — Listening to FM and AM Broadcasts
Page 27 · click to enlarge
Page 27

Specifications Design and specifications are subject to change without notice.

Amplifier Section Output Power:

20 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion.

Audio input sensitivity/Impedance (at 1 kHz)

AUX500 mV/50 k Ω
Speakers Impedance4 Ω – 16 Ω
Tuner FM tuning range87.5 MHz—108.0 MHz AM tuning range: 530 kHz—1 710 kHz
CD player Dynamic range85 dB Signal-to-noise ratio: 85 dB Wow and flutter: Immeasurable

Cassette deck Frequency response:

Normal (type I)100 Hz—10 000 Hz Wow and flutter: 0.35% (WRMS)

General Power requirement: AC 120 V , 60 Hz Power consumption: 40 W (at operation) 2 W (on standby) Dimensions (W/H/D) (approx.):

152 mm x 233 mm x 292 mm Mass (approx.): 3.9 kg

Supplied accessories See page 6.

Speaker Section Type: Full range, bass-reflex type Speakers: 10 cm cone x1 Power handling capacity: 20 W Impedance: 4 Ω Frequency range: 100 Hz—15 kHz Dimensions (W/H/D) (approx.):

147 mm x 233 mm x 189 mm Mass (approx.): 1.9 kg each

Ask about the JVC CA-FSH300

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the JVC CA-FSH300

Be the first to ask — other owners or our team will answer.

Original document

JVC CA-FSH300 manual PDF

52 pages·1.4 MB·Stereo System·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…