
CASTELLANO
LT-37S60BU LT-32S60BU LT-32S60SU LT-26S60BU LT-26S60SU
ITALIANO PORTUGUÊS
WIDE LCD PANEL TV INSTRUCTIONS 16:9 LCD TV BEDIENUNGSANLEITUNG TELEVISEUR A ECRAN LCD PANORAMIQUE MANUEL D’INSTRUCTIONS BREEDBEELD LCD TV GEBRUIKSAANWIJZING TELEVISOR CON PANEL LCD PANORÁMICO MANUAL DE INSTRUCCIONES TV LCD WIDESCREEN ISTRUZIONI TELEVISOR COM ECRÃ PANORÂMICO DE INSTRUÇÕES CRISTAL LÍQUIDO






If the cover cannot be closed due to the cables being in the way
Do not force the cover to close (leave it open). Connecting terminals on the back of the TV Connecting External devices (P. 13)




Insert the batteries Use two AA/R6 dry cell batteries. Insert the batteries from the end, making sure the and polarities are correct.

Please read the user manuals of each device carefully before setup. It is necessary to connect an aerial to watch TV.

Connect with other devices "Connecting external devices" (P. 13)
After all the connections have been made, insert the plug into an AC outlet.
Power requirements Connect the power cord only to a 110-240V,
Installation requirements To avoid overheating, ensure the unit has ample
50/60Hz AC outlet.
room.
When attaching the TV to the wall, use the optional JVC wall mounting unit Consult a qualifi ed technician. See the included manual on mounting procedures. JVC assumes no responsibility for damage due to
improper mounting.
50mm 150mm 150mm 50mm
200mm


After all the connections have been made, insert the plug into an AC outlet. Connect T-V LINK compatible recording device to EXT-2. T-V LINK "What is T-V LINK?" (P. 9)

Set the menu language, installation location and automatically register the TV channels. These channels can be edited later in "Editing channels" (P. 11). (Channel data on the TV can be sent to a connected recording device that is compatible with T-V LINK.)



MENU
BACK
Connecting the TV to a T-V LINK compatible device allows :
registered on the device. The "DIRECT REC" function to
“T-V LINK” (JVC) “Q-LINK” (Panasonic) “Megalogic” (Grundig) “Data Logic” (Metz) “SMARTLINK” (Sony) “Easy Link” (Philips)


powering on for the fi rst time. The power on the remote control can also be used.
and start settings. (This will set up cable television channels.)
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04 CC 05
When not using T-V LINK When using T-V LINK
Is the T-V LINK compatible device connected to EXT-2? Is the device turned on?

Edit the channels registered with "AUTO PROGRAM" in "Initial settings" (P. 9).

When coming from "Initial settings" (P. 9), skip to .
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04 CC 05
compatible device connected to EXT-2? Is the device turned on?


BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04 CC 05
When selecting a preset name from the ID LIST
BBC1 CH 21 CH 22 CH 23 CH 24
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04 CC 05
MCM MDR MOVIE MTV MTV3 CH 25 CC 02 CC 03 CC 04 CC 05
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04 CC 05
Begin Select a CH / CC Enter a number
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC ** CC 03 CC 04
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC CC 03 CC 04
CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04

You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setting up. (Connecting cables are not supplied with this TV.)



· Composite signal / RGB / S-VIDEO · Sound L / R
· Composite signal / RGB / S-VIDEO · Sound L / R
· Composite signal / S-VIDEO · Sound L / R
· Component signal (P. 34) · Sound L / R
AUDIO OUT Listening to the TV on external speakers
· Sound L / R
Output







Mute Note To completely turn off the TV, unplug


When set to AUTO, the aspect ratio
will turn to the ratio obtained from the information the TV received. Without receiving aspect information, it will be the setting in “4:3 AUTO ASPECT” (P.27) Not available in PC mode /
PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUBTITLE FULL
Disappears after a few seconds
(P. 26) to the picture of a favourite channel get saved as well.
and confi rm that the channels you have registered have a beside them
Customisations

This TV can display TV broadcasts and teletext on the same channel in two windows.

(RED) (GREEN) (YELLOW) (BLUE)
Recall your favourite page Press the coloured button as in step 2


Leave the current page open, while you switch to watch TV


E5 *1 : Only appears when AV has been registered as a channel.
Some models of JVC devices cannot be operated with this remote control.


Select the EXT connected to S-VIDEO Set the S-VIDEO mode
Select an EXT to assign a name to Show the name list
VHS S-VHS DVC CAM SAT STB GAME DVD DVR
VHS S-VHS DVC CAM SAT STB GAME DVD DVR


or when in PC mode. You cannot save or export the snapshot.
E.g. You can watch TV and video at the same time.


SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK FAVOURITE SETTING
Cancel Set the time to "0" in step 4
Remaining time You can confi rm the remaining time at step 4, after repeating this process.
SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK FAVOURITE SETTING
enter an "ID NO." (a secret number of your choice)
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03 CC 04 CC 05
BBC1 CH 21 CH 22 CH 23 CH 24 CH 25 CC 02 CC 03
View a locked channel Use the numerical buttons to enter the channel number. When appears, press
and enter your "ID NO.". (If you forget your "ID NO.", check it in step 4.)


sub-menu.

PICTURE MODE Picture mode (BRIGHT / STANDARD / SOFT)
BRIGHT-1 Backlight brightness (Darker Brighter)
CONTRAST Contrast (Lower Higher)
BRIGHT-2 Brightness (Darker Brighter)
SHARP Sharpness (Softer Sharper)
COLOUR Colour (Lighter Deeper)
HUE Tint (Reddish Greenish)
COLOUR TEMP. Colour temperature (WARM / NORMAL / COOL)
FEATURES Finer picture adjustments (P. 27)
STEREO / I · II Mode / Language ( : STEREO / : MONO / : SUB1 / : SUB2)
BASS Low tones (Weaker Stronger)
TREBLE High tones (Weaker Stronger)
BALANCE Speaker balance (Left Stronger Right Stronger)
3D SOUND Ambience level (HIGH / LOW / MONO / OFF)
A.H.B. Emphasize the bass sound (ON / OFF)
BBE *1 Sound enhancement technology (ON / OFF)
SLEEP TIMER Timer for turning off the TV (P. 24)
CHILD LOCK Stops children from watching specifi c channels (P. 24)
APPEARANCE Format for displaying the channel number (TYPE A / TYPE B / TYPE C / TYPE D)
BLUE BACK Displays a blue screen and mute the sound when the signal is weak or absent (ON / OFF)
FAVOURITE SETTING Clear favourite channel settings (P. 17)
ILLUMINATION Lights illumination lamp (P.5) while the TV is on (BRIGHT / SOFT / OFF)
AUTO PROGRAM Select a country, it automatically registers channels (P. 10, )
EDIT / MANUAL Change registered channels or add new ones (P. 11)
LANGUAGE Select a language for on-screen menus (P. 10, )
DECODER(EXT-2) For when connected to VCR with T-V LINK (ON / OFF)
Changes the TV input to EXT-4 when a component signal is input to EXT-4 (ON / OFF) (Not available when viewing PC)
EXT SETTING For use with video players and other devices (P. 22)
HDMI SETTING SIZE (AUTO / 1 / 2) AUDIO (AUTO / ANALOGUE / DIGITAL)
· Change the aspect ratio "ZOOM" (P. 17) · Turn on 3D SOUND "3D SOUND" (P. 17) Other settings
*1 BBE license (P. 32)

By default, the TV automatically adjusts itself for the best picture.


Super DigiPure MOVIE THEATRE COLOUR MANAGEMENT PICTURE MANAGEMENT COLOUR SYSTEM 4:3 AUTO ASPECT
DIGITAL VNR Super DigiPure MOVIE THEATRE COLOUR MANAGEMENT PICTURE MANAGEMENT COLOUR SYSTEM 4:3 AUTO ASPECT

To reduce noise
AUTO AUTO
ON ON
: When noise appears

level


the aerial? Change the direction of the aerial. Is the aerial or its cable
Is the power cord connected to the AC outlet
between the aerial and the cause of interference until no interference
Are the batteries fl at? Are you more than 7 metres away
from the TV? Is the "VCR/TV/DVD SWITCH" set to "TV"? When viewing teletext, the TV menu bar
does not appear. Depending on the stability of the signal, there

Basics Screen Picture Sound
Unplug TV, several minutes later plug it in again. Remote control stops working -
to return to your settings. Aspect ratio changes unintentionally 17
Unnatural colour >>> Adjust COLOUR and BRIGHT-1.
Check your COLOUR SYSTEM. Noise >>> Set to the following functions. PICTURE MODE : STANDARD DIGITAL VNR : AUTO (HIGH) Super DigiPure : MIN
Dull picture >>> Set to the following functions. PICTURE MODE : BRIGHT DIGITAL VNR : MIN Super DigiPure : MAX
If you connected S-Video output device, check the
“S-IN” setting. If the top of the image is distorted, check the video
Strange picture when using an external device
signal quality itself. If movement appears unnatural when receiving a signal
from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).
Adjust the BASS and TREBLE. If receiving a poor signal in "STEREO / · ", switch to MONO. Adjust the channel reception using "MANUAL". Poor sound

(continued)
Switch SIZE in HDMI SETTING to "1" or "2". Wrong screen size 26
Switch AUDIO in HDMI SETTING to ANALOGUE or DIGITAL. No sound 26
Wait a little for the signal to stabilize when switching
in the menu do not work depending on the situation. Some functions do not work -
It is not a malfunction. Some functions (dark background)
Some inputs cannot be selected in the sub-picture -
EXT-4, EXT-5 inputs and PC mode cannot be selected in the
sub-picture.
Is the T-V LINK compatible device connected to EXT-2? Is the SCART CABLE "Fully Wired"? Is the T-V LINK compatible device turned on?
"FEATURE NOT AVAILABLE" appears
After confi rming all the conditions above, press “OK” button again.
Press to start ACI again.
If you still receive the "ACI ERROR" after numerous tries, press to cancel ACI.
LCD panels use fi ne dots ("pixels") to display images.
While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. Please understand that this is not a malfunction.

What is T-V LINK?
T-V LINK allows the TV to share information easily with a connected T-V LINK compatible device. By using T-V LINK :
You can send the channel information programmed on the TV to the T-V LINK compatible device, so that both
the TV and the external device have the same channel settings. When connecting a new external device, channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer to the external device's manual. You can easily record the TV programme you are viewing on a T-V LINK compatible device by using the
"DIRECT REC" feature. For more details, refer to the external device's manual.
Some cable companies transmit a signal called ACI which contains information that allows TV channels to be registered automatically on your TV. When an ACI signal is received, "ACI START / ACI SKIP" appears in the "AUTO PROGRAM" screen.
Depending on the country selected during "AUTO PROGRAM", the receivable broadcast system differs.
UNITED KINGDOM: Receive only PAL-I. FRANCE: Can receive SECAM-L. To receive SECAM-L in countries other than France: 1) Change the "COUNTRY" to "FRANCE" in "AUTO PROGRAM". 2) Press the "BACK" button to return to the menu and enter the channel using "INSERT" or "MANUAL".

*Macintosh* computers are not supported. (Macintosh is a registered trademark of Apple Computer, Inc.)
Resolution 640 x 480 (VGA) 1024 x 768 (XGA)
If the signal doesn't appear, check that the vertical
Connect a DVI device to EXT-5 (HDMI) using DVI-HDMI conversion cable. Connect analogue sound output of the DVI device to L and R terminals in EXT-4.
Set AUDIO in HDMI SETTING to Analogue or AUTO (P. 26)
Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

When the COUNTRY setting is “FRANCE”, select a three-digit CH/CC number. CH/CC List
To use the INSERT function (P. 11), fi nd the CH/CC number corresponding to the TV's Channel number from this table.

CH 58/CH 258 E58, R58 CH 59/CH 259 E59, R59 CH 60/CH 260 E60, R60
CC 19/CC 219 S19 CC 20/CC 220 S20 CC 21/CC 221 S21

Main unit
Model LT-37S60BU LT-32S60BU/SU LT-26S60BU/SU Broadcasting systems CCIR I / B / G / D / K / L (See "Technical information", P. 32)
E2-E12 / E21-E69, F2-F10 / F21-F69, IR A-IR J, ITALY A-H / H+1 / H+2, R1-R12 / R21-R69, S1-S41, X / Y / Z / Z+1 / Z+2, French cable channels (Frequency : 116-172 MHz / 220-469 MHz)
Sound-multiplex systems NICAM (I / B / G / D / K / L), A2 (B / G / D / K) Teletext systems FLOF (Fastext), TOP, WST (standard system) Power requirements AC 110 V - 240 V, 50/60Hz Audio output (Rated power output) 10 W + 10 W Speakers 6.6 cm round x 2 Power consumption [standby]
141 W [2.6 W]
118 W [2.6 W]
Screen size (visible area size measured diagonally) 94 cm 80 cm 66 cm
Dimensions (W x H x D: mm) [without stand]
703 x 536.8 x 225 [703 x 483 x 107] Weights [without stand]
926 x 689.5 x 297 [926 x 631.5 x 108.5]
808 x 611 x 225 [808 x 558.5 x 108]
17.0 kg [13.0 kg] Accessories (See "Check accessories", P. 5)
25.7 kg [20.6 kg]
20.0 kg [16.4 kg]
![JVC LT-26S60SU — 171 W [2.6 W] diagram (page 35)](/cdn/reader/2f/2f6cc3f0f27dbce35240bf98bf1ee6bade3355f3608050e02cc9a24b74412694/images/fig-35-1.webp)
Composite video, S-video, Analog RGB AUDIO L / R
Composite video, S-video, Analog RGB AUDIO L / R
EXT-3 RCA connectors x 3, S-VIDEO connector x 1
Analogue component (576i (625i) / 480i (525i), Progressive : 576p (625p) / 480p (525p), HD : 1080i (1125i), 720p (750p)) AUDIO L / R
HDMI (576i (625i) / 480i (525i) / 576p (625p) / 480p (525p), 1080i (1125i), 720p (750p))
PC INPUT D-SUB (15 pins) x 1 Analogue PC signal (P. 32)
AUDIO OUT RCA connectors x 2 Audio L / R
Headphone Stereo mini-jack x 1 (3.5 mm in diameter)
We may change the design and specifi cations without notice.
Channels and frequencies

2005 Victor Company of Japan, Limited 0605KTH-CR-MU C
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.