
FS-GD7 —Consists of CA-FSGD7 and SP-FSGD7

Enter below the Model No. and Serial No. which are located either on the rear, bot- tom or side of the cabinet. Retain this information for future reference.
[J]

RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Attention: Aération correcte Pour prévenir tout risque de décharge électrique ou d’incendie et éviter toute détérioration, installez l’appareil de la manière suivante: 1. Avant: Bien dégagé de tout objet. 2. Côtés/dessus/dessous: Assurez-vous que rien ne bloque les espaces indiqués sur le schéma ci-dessous. 3. Dessous: Posez l’appareil sur une surface plane et horizontale. Veillez à ce que sa ventilation correcte puisse se faire en le plaçant sur un support d’au moins dix centimètres de hauteur..
15 cm 1 cm
15 cm 1 cm
Cooling fan* Ventilateur de refroidissement*
* About the cooling fan A cooling fan is mounted on the rear panel of the unit to prevent abnormal temperature inside the unit, thus assuring normal operation of theunit. The cooling fan automatically starts rotating to intake external cool air when the volume is increased up to more than a certain level. * À propos du ventilateur de refroidissement Un ventilateur de refroidissement se trouve sur le panneau arrière de l’appareil afin d’éviter la création d’une température anormale à l’intérieur de l’appareil et permettre ainsi un fonctionnement normal de l’appareil. Le ventilateur de refroidissement commence à tourner et à aspirer de l’air frais automatiquement quand le volume est augmenté au-dessus d’un certain niveau.

For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMIRIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR; “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.
For the main unit: Declaration of Conformity Model Number: FS-GD7 Trade Name: JVC Responsible Party: JVC Americas Corp. Address: 1700 Valley Road, Wayne New Jersey 07470 Telephone Number: 973-317-5000 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.





If anything goes wrong, unplug the AC power cord and consult your dealer.
DO NOT install the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.
DO NOT handle the AC power cord with wet hands.
Others • Should any metallic object or liquid fall into the System, unplug the AC power cord and consult your dealer before operating any further.
DO NOT disassemble the System since there are no user serviceable parts inside.

Step 1 :Unpack the package and
check the accessories.
Insert the batteries into the remote control by matching the polarity (+ and –) correctly.
Step 2:Prepare the remote control.
Step 3 :Hook up the components such
as AM/FM antennas, speakers, etc. (see pages 4 to 6).
Finally plug the AC power cord.
Now you can operate the System.

If you need more detailed information, see page 6.

Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary.
AM loop antenna (supplied) Turn it until the best reception is obtained.
Turn the power off to all components before connections.

Audio cord (not supplied)
Optical digital cord (not supplied)
S-VIDEO cord (not supplied)
Composite video cord (supplied)
Component video cord (not supplied)
To a wall outlet Plug the AC power cord only after all connections are complete.


Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector.

Extend it so that you can obtain the best reception.
Gray cord with black stripe (–) connect to black (–) terminal
FM antenna (supplied)

To assemble and connect the AM loop antenna To assemble the AM loop antenna

This System supports progressive scanning. If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting progressive mode.

(at the same time)
To connect the AM loop antenna

Progressive scanning. For a progressive TV. The PROGRESSIVE indicator lights.
To connect the speaker cords Connect the right speaker to the R terminals, and the left speaker to the L terminals.

When connecting the speaker cords, match the polarity of the speaker terminals: gray cord (+) to red (+) and gray cord with black stripe (–) to black (–).


This System has been designed to play back the following discs:
When playing a multi-channel encoded DVD, the System properly converts these multi-channel signals into 2 channels, and emits the downmixed sound from the speakers. • To enjoy the powerful sound of these multi-channel encoded DVDs, connect a proper decoder or an amplifier with a proper built-in decoder to the digital output terminal on the rear.
In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD- Extra.
If “ ” appears on the TV screen when you press a button, the disc cannot accept the operation you have tried to do, or data required for that operation is not recorded on the disc.
* Note on Region Code DVD players and DVDs have their own Region Code numbers. This System can play back only DVDs recorded with the NTSC color system whose Region Code numbers including “1.”
Ex.:
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries.
If a DVD with the improper Region Code numbers is loaded, “RGN ERR (REGION CODE ERROR)” appears on the display and playback will not start.

The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display.

2 MP3 indicator • Lights when the current track is recorded in MP3 format.
9 3D PHONIC indicator • Lights when 3D PHONIC is activated (see page 13).
p Clear Voice indicator
q B.S.P. indicator
5 SOUND TURBO indicator • Lights when SOUND TURBO II is activated (see page 15).
6 AHB (active hyper bass) PRO indicator • Lights when AHB PRO is activated (see page 15).
7 SLEEP indicator • Lights when the Sleep Timer is activated. (see page 18)
r A. (auto) STANDBY indicator
w BONUS indicator · e PROGRESSIVE indicator · t Timer indicators


Elapsed playing time Track no. Track no. Group no.
Elapsed playing time Track no. Total playing time Total track no.
Elapsed playing time* Track no. Total playing time Total track no.*
* “PBC” appears while playing a disc with PBC.
Elapsed playing time Track no. Current track no. Current group no.
File no. Group no. Current file no. Current group no.

DISPLAY
RETURN
DISC SELECT
TOP MENU
MENU
2 , 3 , 5 , ∞ ENTER
GROUP/TITLE 4 , ¢
FM/PLAY
To turn off (standby) the System
MODE
SHIFT
The STANDBY lamp on the main unit lights up. • A small amount of power is always consumed even while on standby.
For private listening Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting the headphones. • Disconnecting the headphones will activate the speakers again.
DO NOT turn off (standby) the System with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.
To turn off the clock indication to save the power While the System is turned off...
(at the same time)
Numeric · buttons · 1/¡

To preset the stations You can preset 30 FM and 15 AM stations.

1 Tune in to a station you want to preset. • You can also store the monaural reception mode for FM preset stations if selected. 2 Activate the preset number entry mode.
To tune in to a station While FM or AM is selected...

Examples: To select preset number 5, press 5. To select preset number 15, press +10, then 5. To select preset number 30, press +10, +10, then 10.
Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing. • When you repeatedly press the button, the frequency changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
The MONO indicator lights on the display. Reception will improve though stereo effect is lost—Monaural reception mode. To restore the stereo effect, press the button again (the MONO indicator goes off).
4 Store the station.

1 Select a band (FM or AM).


At the beginning of a scene containing multi- angle views.
At the beginning of a scene containing multi- audio sounds.
At the beginning of a scene containing multi- subtitles.
To insert a disc You can insert a disc while playing another source. Main Unit:
,
DISC 1
DISC 2 DISC 3
DISC 5 DISC 4
Main Unit:
To select a title/group While playing...
To release, press DVD/CD 3.
(at the same time)
To select a chapter/track While playing...
or

7 For DVD Video/DVD Audio: 1 Show the disc menu.
To locate a particular portion While playing a disc except MP3...


To return to normal playback, press DVD/CD 3.
To locate an item directly You can select a title/chapter/track directly and start playback. • For DVD Video, you can select a title before starting playback, you can select a chapter after starting playback.
7 For SVCD/VCD with PBC: While playing a disc with PBC, “PBC” appears on the display. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts.
Examples: To select number 5, press 5. To select number 15, press +10, then 5. To select number 30, press +10, +10, then 10.
Examples: To select number 5, press 5. To select number 15, press +10, then 5. To select number 30, press +10, +10, then 10.

To use 3D PHONIC While playing...
To move to the next or previous page of the current menu:
3D PHONIC ACTION
On the TV screen
ACTION Suitable for action movies and sports programs.
DRAMA Creates natural and warm sound. Enjoy movies in a relaxed mood.
THEATER Enjoy sound effects like in a major theater.
To play back using the disc menu You can operate a disc—DVD and SVCD/VCD with Playback Control (PBC)—using the disc menu shown on the TV screen.
To reactivate PBC, press 7, then press 4.
(Canceled)

5 Check if the drivers are correctly installed. 1 Open the Control Panel on your PC: Select [Start] = [Control Panel] 2 Click [System] = [Hardware] = [Device Manager] = [Sound, video and game controllers] and [Universal Serial Bus controllers] • The following window appears, and you can check whether the drivers are installed.
This System is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC. When you connect your PC for the first time, follow the procedure below. • Remember you cannot send any signal or data to your PC from this System.

How to install the USB drivers The following procedure is described using the English version of WindowsR XP. If your PC is running on a different version of operation system or language, the screens shown on your PC’s monitor will differ from the ones used in the following procedure.
1 Turn on your PC and start running WindowsR 98, WindowsR 98SE, WindowsR Me, WindowsR 2000, or WindowsR XP. • If the PC has been turned on, quit all the applications now running. 2 Select USB for the source.
To play back sounds on the PC Refer to the manuals supplied with the sound reproduction application installed in the PC.
To connect other equipment By using an stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as an MD player, a TV, etc.
3 Connect the System to the PC using a USB cable (not supplied).


If the audio output on the other equipment is not stereo mini plug type, Use a plug adapter to convert the stereo mini plug to the corresponding plug of the audio output. • Refer to the manuals supplied with the other equipment.
*MicrosoftR, WindowsR 98, WindowsR 98SE, WindowsR Me, WindowsR 2000 and WindowsR XP are registered trademarks of Microsoft corporation.


You can adjust the volume level from level 0 (VOL MIN) to level 31 (VOL MAX).

To restore the volume, press again, or adjust the volume level.
To emphasize the sound—SOUND TURBO II This function emphasizes the sound.
OFF
To emphasize heavy bass sound—AHB PRO
This function dynamically enhances bass response.
To adjust the tone—BASS/TREBLE You can adjust the bass and treble level from 0 to +5. • When you adjust this setting, the SOUND TURBO II is canceled automatically.
To adjust the bass

(Canceled) · OFF (Canceled)

Changing the Display Brightness—DIMMER
You can dim the display window. Remote Control:
This function allows you to easily understand the dialog of DVD even with the volume turned down. • This function only works for center-channel signal encoded multi-channel disc.

Main Unit:
AUTO DIM DIM OFF (Canceled)
DIM 1 Dims the display.
The DVD sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD.
DIM 2 Erases the display illumination.


HIGH Output level is increased (more than “MIDDLE”).
While showing a playback picture on the TV screen, you can select the preset picture tone, or adjust it and store your own likeliness.
USER1/USER2 You can adjust parameters and can store the settings (see next page).
Canceled

Setting the Clock
1 Select “USER1” or “USER2.” • Follow steps 1 and 2 explained on page 16. 2 Select a parameter you want to adjust.

1 Activate the clock setting mode.
GAMMA Adjust if the neutral color is bright or dark (–3 to +3).

BRIGHTNESS Adjust if the entire picture is bright or dark (–8 to +8).
CONTRAST Adjust if the far and near positions are unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or blackish (–7 to +7).
TINT Adjust if the human skin color is unnatural (–7 to +7).
3 Adjust the minute.
SHARPNESS Adjust if the picture is indistinct (–8 to +8).
3 Adjust the parameter.
Now the built-in clock starts working.
To check the current clock time during play

4 Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again.

Automatically

When Auto Standby is in use, the A.STANDBY indicator lights on the display. When the disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (on standby) automatically. • Auto Standby does not work while you are listening to radio (FM/AM) and the external component (AUX and USB).
1 Specify the time (in minutes).

To check the time remaining until the shut-off time



For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to. For SVCD/VCD: While playing back a track, you can select the audio channel to play. • You can also select the audio track using the on-screen bar (see page 25).
ST1/ST2/ST To listen to normal stereo (2 channel) playback.

Selecting the View Angle
For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For SVCD: While playing back a track, you can select the subtitles even if no subtitles are recorded on the disc. • You can also select the subtitle language using the on- screen bar (see page 25).
While playing...
While playing a DVD Video... 1 Display the subtitle selection window.
Ex.:

2 Select the subtitle language.
Ex.:

While playing an SVCD video...

3 Follow the interactive instructions shown on the TV screen.
To cancel the key number entry, press 7.

2 Select slow-motion speed.
Forward slow motion starts.
Reverse slow motion starts.
x1/32 x1/16 x1/8 x1/4 x1/2
x1/32 x1/16 x1/8 x1/4 x1/2
To resume normal playback, press DVD/CD 3.
To replay the previous scenes (One touch replay function) • This function is only used while playing DVD Video.
(at the same time)
The playback position moves back about 10 seconds before the current position (only within the same title).

Zoom 1 While playing back...

Frame-by-frame playback 1 While playing...
Still picture playback starts.
As the number increases, magnification also increases.
2 Move the zoomed-in position.
2 Advance the still picture frame by frame.
To resume normal playback, press DVD/CD 3.
1 While playing...
To resume normal playback, press ZOOM repeatedly until “ZOOM OFF” appears on the TV screen.
Still picture playback starts.


Program Play
You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. 1 Before starting playback, activate Program Play.


No Group/Title Disc Track/Chapter 1 2 3 4 5 6 7 8 9 10
On the TV screen

Examples: To enter number 5, press 5. To enter number 15, press +10, then 5. To enter number 30, press +10, +10, then 10.
3 If you want to program the other chapters or tracks, repeat the above step 2.
On the display

4 Start playback.
Playback starts in the order you have programmed.
You can play the chapters or tracks of all loaded discs at random. • Random Play cannot be used for some DVDs.
1 Before starting playback, activate Random Play.

To check the programmed contents Before or after playback...
Playback starts in random order. Random Play continues to the disc on the next tray when all the chapters or tracks in current disc are played once (when Repeat Play is not activated). • Playback ends when all the discs are played once (when Repeat Play is not activated).
To skip to the beginning of the current track, press 4.
To add steps in the program: Repeat step 2 on page 22.
To exit from Program Play Before or after playback...
To exit from Random Play Before or after playback...
PROGRAM RANDOM
Canceled · Canceled


ALL* Repeats all discs in all tray or all programmed tracks.

*When DVD Video, DVD Audio or SVCD/VCD with PBC is loaded in the System, this function may not work correctly.
A- lights on the display. • appears on the TV screen if the TV is turned on.
A-
ALL *
(at the same time)
1DISC
2 Select the end point (B).

(at the same time)
To cancel A-B Repeat, press REPEAT A-B again while holding SHIFT.
You can lock the disc trays so that no one can eject the loaded disc. • This is possible while the System is on standby and the clock indication is turned on (see page 10). While the disc trays are closed...

ALL
To cancel the prohibition, repeat the same procedure. “UNLOCKED” appears on the display.


You can check the disc information (except for MP3/JPEG) and use some functions through the on-screen bar.

Indication Meanings Mbps Current transfer rate (Megabits per second) Current disc
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TIME OFF CHAP. 1/3 1/ 3 1/1
TIME OFF TRACK PAGE 1/3 1/3
Select to change the audio language or channel (see also page 19).
Select to change subtitle language (see also page 20).
Select to change the view angle (see also page 20).
Select to change the page (see also page 21).

For detailed operations of the following functions, see also “Operations Using the On-screen Bar” on the left.
Ex.: Selecting a subtitle (French) for DVD Video: While a disc is selected as the source...
Changing the time information You can change the time information in the on-screen bar and the display window on the main unit. 1 Display the on-screen bar with the pull-down menu.
1 Display the on-screen bar with the pull-down menu.

TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TOTAL 1:01:58 CHAP 3 8.5Mbps DISC 2
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TIME OFF CHAP. 1/3 1/ 3 1/1
TIME OFF CHAP. 1/3 1/ 3 1/1
2 Make sure is selected (highlighted). 3 Change the time indication.
2 Select (highlight) the item you want.


TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TIME OFF CHAP. 1/3 1/ 3 1/1
3 Display the pop-up window.
REM Remaining time of the current chapter/ track.
TOTAL 1:01:58 CHAP 3
1/3 1/ 3 1/1
To erase the on-screen bar
4 Select the desired option in the pop-up window.

1/3 2/ 3 1/1
Repeat Play • See also page 24.
1 While playing (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu. 2 Select . 3 Display the pop-up window.
5 Finish the setting.
Pop-up window goes off.
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TOTAL 1:01:58 CHAP 3 8.5Mbps
TIME OFF CHAP. 1/3 1/ 3 1/1
To erase the on-screen bar
1/3 1/3 1/3

4 Select the repeat mode you want.
Time Search You can move to a particular point by specifying the elapsed playing time. For DVD Video/DVD Audio:
ALL Repeats all discs or all programmed tracks.

You can specify the elapsed time for the current title. For CD/SVCD/VCD:
*During Program Play and Random Play, “STEP” appears. 5 Finish the setting.
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TOTAL 1:01:58 CHAP 3 8.5Mbps
TIME OFF CHAP. 1/3 1/ 3 1/1
TIME _ : _ _ : _ _
4 Enter the time. You can specify the time in hours/minutes/seconds.
Examples: To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.
A-B Repeat • See also page 24. 1 While playing, display the on-screen bar with the pull- down menu. 2 Select . 3 Display the pop-up window.
To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TOTAL 1:01:58 CHAP 3 8.5Mbps
OFF 1/3 1/3 1/3 TIME
TIME OFF CHAP. 1/3 1/ 3 1/1
The System starts playing the disc from the selected playing time.
4 Select “A-B”.
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TOTAL 1:01:58 CHAP 3 8.5Mbps
TIME OFF CHAP. 1/3 1/ 3 1/1
A–B
5 Select the start point (A).
C 8.5Mbps DISC 2
TIME ACHAP. 1 / 3
6 Select the end point (B).
A-B Repeat starts. The selected portion plays repeatedly. • Before pressing ENTER, you can search for the end point using ¡.

Chapter/Track Search You can search for the chapter (DVD Video) or track (DVD Audio) number to play. 1 While playing, display the on-screen bar with the pull- down menu. 2 Select or . 3 Display the pop-up window.
The CONTROL screen automatically appears on the TV screen when you load an MP3 or JPEG. You can search for and play the desired tracks through the CONTROL screen. • If both types of files (MP3 and JPEG) are recorded on a disc, select the file type to play (see page 34).

TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TOTAL 1:01:58 CHAP 3 8.5Mbps
OFF 1/3 1/3 1/3 TIME
TIME OFF CHAP. 1/3 1/ 3 1/1
4 Enter the desired chapter/track number.
Examples:
To select chapter/track number 5, press 5. To select chapter/track number 15, press 1, then 5. To select chapter/track number 30, press 3, then 0.
Cloudy.mp3 Fair.mp3 Fog.mp3 Hail.mp3 Indian summer.mp3 Rain.mp3 Shower.mp3 Snow.mp3 Thunder.mp3 Typhoon.mp3 Wind.mp3 Winter sky.mp3
The System starts playing the searched chapter or track.
Track information (ID3 Tag Version 1.0: only for MP3) 6
Elapsed playing time of the current track (only for MP3) 8
Current track number/total number of tracks in the current group (total number of tracks on the disc) 0 Highlight (green) bar - Track list

To move the highlight bar between group list and track list
To repeat slide-show for JPEG While playing or before starting playback...

Moves the bar to the track list.
Moves the bar to the group list.
To select a group/track in the list
Move the highlight bar to a desired item. • If you move the highlight bar while playing back an MP3 disc, the selected track starts playback automatically.
To zoom in the still picture • You cannot zoom in the still picture during slide-show.
1 While playing...
2 Change the magnification.


Playback starts with the selected track. • Pressing DVD/CD 3 also starts playback.
The selected track (still picture) is displayed until you change it.
As the number increases, magnification also increases.
3 Move the zoomed-in position.
Slide-show playback starts. Each track (still picture) is shown on the screen for few seconds, then changes one after another.
To resume normal playback, press ZOOM repeatedly until “ZOOM OFF” appears on the TV screen.
To start playback


1 Select one of the timer setting modes you want to set— Daily 1 ON time, Daily 2 ON time, or Daily 3 ON time.

Daily 1 Timer Daily 2 Timer Daily 3 Timer
DAILY 1 ON (Time) ON (Time) ON (Time) DAILY 2 DAILY 3
Ex.: When Daily Timer 1 setting mode is selected
1 Set the hour then the minute for on-time. 2 Set the hour then the minute for off-time. 3 Select the playback source—“TUNER FM,” “TUNER AM,” “DISC,” or “AUX.”
4 For “TUNER FM” and “TUNER AM”: Select a preset channel (see page 11). • Select “FM --” or “AM --” for the last selected station.
For “DISC”: Select the disc number, group number, then the track number (see page 12).
For “AUX”: Connect the other equipment (see page 14).

5 Select the volume level. • You can select the volume level (“1” to “MAX” and “VOL – –”). If you select “VOL – –,” the volume is set to the last level when the System has been turned off. Once settings are complete, the Timer setting information appears in sequence. 3 Turn off the System (on standby) if you have set the timer with the System turned on.
To turn off the Timer after its setting is done Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days. 1 Select the Timer you want to cancel.

Daily 1 Timer Daily 2 Timer Daily 3 Timer
DAILY 1 ON (Time) ON (Time) ON (Time) DAILY 2 DAILY 3
Ex.: To cancel Daily Timer 1
2 Turn off the selected Timer.
How Daily Timer actually works Once the Daily Timer has been set, the timer ( ) indicator and timer number indicator (1/2/3) are lit on the display. Daily Timer is activated at the same time everyday until the timer is turned off manually (see the next column) or another timer is activated.
To turn on the Timer 1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3) you want to activate.

Daily 1 Timer Daily 2 Timer Daily 3 Timer
DAILY 1 ON (Time) ON (Time) ON (Time) DAILY 2 DAILY 3
Ex.: When Daily Timer 1 is selected
When the off-time comes The System stops playback, and turns off (on standby) automatically. • The timer setting remains in memory until you change it.
2 Activate the selected Timer.


You can use the Setup Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”:
1 Display the Setup Menu.
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
2 Select one of the Setup Menus.
MONITOR TYPE
4:3 LB
PICTURE SOURCE
AUTO
SCREEN SAVER
ON
FILE TYPE
AUDIO
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
3 Select the item you want to adjust.
MONITOR TYPE
4:3 LB
Setup Menu Icons The icon for the selected Setup Menu will be highlighted.
AUTO
SCREEN SAVER
ON
FILE TYPE
AUDIO
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
4 Display the pop-up window.
MONITOR TYPE
4:3 LB
PICTURE SOURCE
AUTO
SCREEN SAVER
ON
FILE TYPE
AUDIO
AUDIO STILL PICTURE
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
5 Select the desired option in the pop-up window.
MONITOR TYPE
4:3 LB
PICTURE SOURCE
AUTO
SCREEN SAVER
ON
FILE TYPE
AUDIO
AUDIO STILL PICTURE
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
1 LANGUAGE Setup Menu 2 PICTURE Setup Menu 3 AUDIO Setup Menu 4 OTHERS Setup Menu

6 Finish the setting.
7 PICTURE Setup Menu You can select the desired options concerning a picture or monitor screen.
7 Repeat steps 3 to 4 to set other items on the same Setup Menu. Repeat steps 2 to 4 to set other items on another Setup Menu.
MONITOR TYPE
4:3 LB
PICTURE SOURCE
AUTO
SCREEN SAVER
ON
FILE TYPE
AUDIO
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
To erase the Setup Menu
MONITOR TYPE Select the monitor type of your TV to play DVD Video recorded with aspect ratio of 16:9.
Select one of the following:
16:9: Select when the aspect ratio of your TV is 16:9 and when the TV has the screen size adjustment function.
7 LANGUAGE Setup Menu You can select the initial languages for disc playback. You can also select the language shown on the TV screen while operating this System.

4:3 LB (Letter Box): Select when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
4:3 PS (Pan Scan): Select when the aspect ratio of your TV is 4:3. While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.
ENGLISH
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
MENU LANGUAGE Some discs have multiple menu languages. Select from—ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU (see “Language Code List” on page 41).
Ex.: 16:9 Ex.: 4:3 LB Ex.: 4:3 PS
AUDIO LANGUAGE Some discs have multiple audio languages. Select from—ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU (see “Language Code List” on page 41).
SUBTITLE Some discs have multiple subtitle languages. Select from—ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU (see “Language Code List” on page 41) or “OFF (no subtitle).”
ON SCREEN LANGUAGE Select one of the languages shown on the TV screen from— ENGLISH, SPANISH and FRENCH.

PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source).
7 AUDIO Setup Menu You can adjust the sound settings of the System.
Select one of the following:
STREAM/PCM
DOLBY SURROUND DOWN MIX
AUTO: Normally select this. When playing back a disc containing both video and film sources, the System automatically changes the processing to match it to the picture type (film or video source) of the current chapter.
D. RANGE COMPRESSION
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
FILM: To play a film source disc.
VIDEO: To play a video source disc.
DIGITAL AUDIO OUTPUT When using the digital output terminal on the rear, set this correctly according to the connected component.
SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
Select one of the following:
PCM ONLY: To connect to a linear PCM digital equipment.
Select one of the following:
To connect to a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder.
ON: The picture on the TV screen becomes dark when no operation is done for about 5 minutes.
OFF: To cancel the screen saver.
STREAM/PCM: To connect to a DTS decoder or an amplifier with a built-in DTS decoder.
FILE TYPE If both audio tracks (MP3 files) and still pictures (JPEG files) are recorded on a disc, you can select which to play.
DOWN MIX When using the digital output on the rear, set this correctly according to the connected component. When playing a multi-channel DVD, the System converts the signals into 2 channels properly.
Select one of the following:
AUDIO: To play MP3 files.
STILL PICTURE: To play JPEG files.
Select one of the following:
To connect an amplifier with the Dolby Pro Logic decoder.
STEREO: To connect a conventional stereo amplifier, receiver, MD recorder, etc.

D. (Dynamic) RANGE COMPRESSION You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night. • The effectiveness varies depends on a software.
Select one of the following:
AUTO: To apply the compression effect to the downmixed multi-channel sound.
ON: To always apply the compression effect for all Dolby Digital software. Loud sound will become low and vice versa.

7 OTHERS Setup Menu You can change some other convenient functions.
USE TO SELECT. USE ENTER TO CONFIRM TO EXIT, PRESS [SET UP]. ENTER
RESUME You can activate or deactivate Resume for disc playback (see pages 12).
ON SCREEN GUIDE You can activate or deactivate the on-screen guide icons (see pages 12 and 25). • When recording the picture on a VCR, select “OFF” to avoid recording the guide icons on your video tape.


You can operate the JVC’s TV using this remote control.

To select the input mode (either TV or VIDEO):

– This System can recognize the total of 1000 tracks and of
99 groups (each group can contain up to 150 tracks). Those exceeding the maximum number cannot be recognized. – This System can show up to 23 characters of the file
Getting Started (see pages 3 to 6) Changing the Scanning Mode: • To enjoy the progressive video picture, connect a TV with the progressive video input using component video cord.
(track) names (except for extention) and 30 characters of the ID3 tags on the display and the TV screen. – Some characters or symbols will not be shown (and will
*MicrosoftR, WindowsR 98, WindowsR 98SE, WindowsR Me, WindowsR 2000 and WindowsR XP are registered trademarks of Microsoft corporation.
regular CDs. (It depends on the complexity of the group/ file configuration.) – Some MP3/JPEG files cannot be played back and will be
skipped. This result from their recording processes and conditions. – When making MP3 discs, use ISO 9660 Level 1 or Level
2 for the disc format. – This System can play back MP3/JPEG files with the
extension code or (regardless of the letter case—upper/lower). – It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps.

On-Screen Disc Operations (see pages 25 to 29) • For JPEG files playback... – It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play only baseline JPEG files.
Progressive JPEG files or lossless JPEG files cannot be played.
Baseline JPEG format: Used for digital cameras, web, etc. Progressive JPEG format:Used for web. Lossless JPEG format: An old type and rarely used now. – This System may not play back JPEG files properly
which are recorded by the devices other than digital still camera. – If progressive or lossless JPEG files are played back, a
black screen appears. In this case, stop playback and select a baseline JPEG file. Note that it may take a long time to select another file.

MP3/JPEG groups/tracks configuration This System plays back the tracks as follows.
Level 1 Level 2 Level 3 Level 4 Level 5

To remove the speaker grilles
To get the best performance of the System, keep your discs and mechanism clean.

insecticides to it. – DO NOT allow any rubber or plastic to remain in contact
for a long time.
Holes · Projections · Speaker grille

“NO AUDIO” appears. ] This System cannot play back illegally produced DVD
Audio discs. “LR ONLY” appears. ] Some DVD Audio discs prohibit downmixed output.
If you are having a problem with your System, check this list for a possible solution before calling for service.
When you play back such a disc, this System plays back the left front and right front signals only. The disc sound is discontinuous. ] The disc is scratched or dirty. The disc tray does not open or close. ] The AC power cord is not plugged in. ] Child Lock is in use (see page 24).
Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat the procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the AC power cord and then plug it back in. Unable to operate the System from the remote control. ] The path between the remote control and the remote
Unable to play back through the USB connection. ] USB connection and setting is incorrect (see page 14).
sensor on the System is blocked. ] Point it at the remote sensor on the front panel. ] Signals cannot reach the remote sensor. More closer to
the System. ] The batteries are exhausted. No sound is heard from the speakers. ] Speaker connections are incorrect or loose. ] Headphones are connected. No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts. ] The video cord connections are incorrect or loose. ] The System is connected to a TV which does not support
Daily Timer does not work. ] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
Setup Menu Operations: No subtitle appears on the display though you have selected the initial subtitle language. ] Some DVDs are programmed to always display no
subtitle initially. If this happens, press SUBTITLE after starting play (see page 20). Audio language is different from the one you have selected as the initial audio language. ] Some DVDs are programmed to always use the original
progressive scanning. The left and right edges of the picture are missing on the screen. ] Select “4:3 LB” for “MONITOR TYPE” (see page 33).
language initially. If this happens, press AUDIO after starting play (see page 19).
Hard to listen to broadcasts because of noise. ] Antennas connections are incorrect or loose. ] The AM loop antenna is too close to the System. ] The FM antenna is not properly extended and positioned.
The disc does not play. ] The disc is placed upside down. Place the disc with the
label side up. ID3 Tag on an MP3 disc cannot be shown. ] There are two types of ID3 Tag—Version 1 and Version
recorded. It depends on the writing application. MP3/JPEG tracks are not played back. ] The inserted disc may includes both type of tracks (MP3
files and JPEG files). In this case, you can only play back the files selected by the “FILE TYPE” setting (see page 34). ] You have changed the “FILE TYPE” setting after you
inserted a disc. In this case, reload the disc.

AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Tibetan BR Breton CA Catalan CO Corsican CS Czech CY Welsh DA Danish DZ Bhutani EL Greek EO Esperanto ET Estonian EU Basque FA Persian FI Finnish FJ Fiji FO Faroese FY Frisian GA Irish GD Scots Gaelic GL Galician GN Guarani GU Gujarati HA Hausa HI Hindi HR Croatian HU Hungarian HY Armenian IA Interlingua IE Interlingue IK Inupiak IN Indonesian IS Icelandic IW Hebrew JI Yiddish
JW Javanese KA Georgian KK Kazakh KL Greenlandic KM Cambodian KN Kannada KO Korean (KOR) KS Kashmiri KU Kurdish KY Kirghiz LA Latin LN Lingala LO Laothian LT Lithuanian LV Latvian, Lettish MG Malagasy MI Maori MK Macedonian ML Malayalam MN Mongolian MO Moldavian MR Marathi MS Malay (MAY) MT Maltese MY Burmese NA Nauru NE Nepali NL Dutch NO Norwegian OC Occitan OM (Afan) Oromo OR Oriya PA Panjabi PL Polish PS Pashto, Pushto PT Portuguese QU Quechua RM Rhaeto-Romance RN Kirundi RO Rumanian RU Russian RW Kinyarwanda SA Sanskrit SD Sindhi SG Sangho SH Serbo-Croatian SI Singhalese SK Slovak
SL Slovenian SM Samoan SN Shona SO Somali SQ Albanian SR Serbian SS Siswati ST Sesotho SU Sundanese SV Swedish SW Swahili TA Tamil TE Telugu TG Tajik TH Thai TI Tigrinya TK Turkmen TL Tagalog TN Setswana TO Tonga TR Turkish TS Tsonga TT Tatar TW Twi UK Ukrainian UR Urdu UZ Uzbek VI Vietnamese VO Volapuk WO Wolof XH Xhosa YO Yoruba ZU Zulu

Playback disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD Video
48 kHz, 16 bit Linear PCM*1 with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM 48 kHz, 16 bit Linear PCM with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM with DTS DTS bitstream 48 kHz, 16 bit Linear PCM DVD Audio
no output*2 with 48/96/192 kHz, 16/20/24 bit Linear PCM with 44.1/88.2/176.4 kHz, 16/20/24 bit Linear PCM no output*3
with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM with DTS DTS bitstream 48 kHz, 16 bit Linear PCM SVCD, VCD, CD 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM CD with DTS DTS bitstream 44.1 kHz, 16 bit Linear PCM MP3 disc 32/44.1/48 kHz, 16 bit Linear PCM
*1 While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DIGITAL AUDIO OUT terminal if the discs are not copy-protected. *2 When the disc is not copyright protected, “48 kHz, 16 bit Linear PCM” signal is output. *3 When the disc is not copyright protected, “44.1 kHz, 16 bit Linear PCM” signal is output.
OUT Output Signals

Refer to the pages to see how to use the buttons and controls.

10, 31 11, 17, 30, 31 23, 31, 36
11, 13, 16 – 18, 20 – 22, 27, 28
13 13, 16, 17, 20, 21, 23, 26 – 30, 32, 33, 36
6, 10 – 13, 16 – 18, 21, 24, 36

General Power requirement: AC 120 V , 60 Hz Power consumption: 150 W (at operation) 26 W (on standby) 1.3 W (with deactivating the clock indication) Dimensions (approx.):189 mm x 224 mm x 406 mm
6 Ω at 1 kHz with no more than 10% total harmonic distortion.
(7-1/2 inch x 8-7/8 inch x 16 inch) (W/H/D) Mass (approx.): 6.5 kg (14.4 lbs)
Analog input:
Speakers Type: 2-way Bass-reflex type Magnetically shielded Speaker systems: Woofer: 12 cm (4-3/4 inch) cone x 1 Tweeter: 4 cm (1-5/8 inch) cone x 1 Power handling capacity: 90 W Impedance: 6 Ω Frequency range: 45 Hz – 20 000 Hz Sound pressure level: 84 dB/W•m Dimensions (approx.): 165 mm x 286 mm x 237 mm (6-1/2 inch x 11-5/16 inch x 9-3/8 inch) (W/H/D) Mass (approx.): 2.8 kg (6.2 lbs) each
–21 dBm to –15 dBm (660 nm ±30 nm)
Color system: NTSC VIDEO (composite): 1 V(p-p)/75 Ω S-VIDEO: Y (luminance) 1 V(p-p)/75 Ω C (chrominance, burst)
0.286 V(p-p)/75 Ω COMPONENT:(Y) 1 V(p-p)/75 Ω (PB/PR) 0.7 V(p-p)/75 Ω
Supplied Accessories See page 3.
CD/VCD/SVCD CD-R/CD-RW (recorded in Audio CD/ Video CD/ Super Video CD/ MP3/ JPEG format) DVD-R/DVD-RW (recorded in video format) Horizontal resolution: 500 lines Wow and flutter: Immeasurable
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.”
Design and specifications are subject to change without notice.





0205MWMMDWBET EN © 2005 Victor Company of Japan, Limited
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.