EN
NETGEAR logo
Official user manual

NETGEAR JR6150

2 pages·907 KB·Network Router·PDF·ENDEFRITNLJA
NETGEAR JR6150
Table of Contents 8 sections Installation Guide · AC750 Wireless Dual Band Gigabit Router JR6150 · Package Contents · ReadySHARE Printer · … ShowHide
Page 1 of the NETGEAR JR6150 user manual — Package Contents
Page 1 · click to enlarge
Page 1
NETGEAR JR6150 — Installation Guide diagram (page 1)
Fig. 1 · Installation Guide
1. Step 2. Step 3.

Installation Guide

Unplug the power to turn off your modem.

Connect one end of the blue Ethernet cable to your modem, and the other end to the Internet port on your router.

Plug in, then turn on your modem.

NETGEAR JR6150 — Installation Guide diagram (page 1)
Fig. 2 · Installation Guide

AC750 Wireless Dual Band Gigabit Router JR6150

Wait approximately 2 minutes until your modem turns on.

Package Contents

If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power.

NETGEAR JR6150 — Package Contents diagram (page 1)
Fig. 3 · Package Contents
NETGEAR JR6150 — Package Contents diagram (page 1)
Fig. 4 · Package Contents
NETGEAR JR6150 — Package Contents diagram (page 1)
Fig. 5 · Package Contents
NETGEAR JR6150 — Package Contents diagram (page 1)
Fig. 6 · Package Contents
NETGEAR JR6150 — Package Contents diagram (page 1)
Fig. 7 · Package Contents

AC750 Wireless Dual Band Gigabit Router

4. Step 5. Step 6.

Open a browser. Power adapter Ethernet cable

Connect the power adapter to the router, then plug it into an outlet. Wait until the Wireless LED turns solid green.

Connect the router to your computer.

If the web page does not display, close and reopen the browser and enter http://www.routerlogin.net in the address bar, or check the “Troubleshooting” chapter of the

Use another Ethernet cable to establish a wired connection as shown in this diagram.

If none of the LEDs light, make sure that the Power On/Off button is in the on position (pushed in).

(Optionally) Connect wirelessly by using the preset wireless security settings located on the bottom label.

user manual.

Page 2 of the NETGEAR JR6150 user manual — WPS Method
Page 2 · click to enlarge
Page 2

ReadySHARE Printer

Preset Wireless Security

Connect Wireless Devices to Your Router

ReadySHARE Printer lets you connect a USB printer to the router’s USB port and access it wirelessly. To set up this feature:

This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device (like a serial number) to protect and maximize your wireless security. This information is located on the label on the bottom of the product.

Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers and other devices to your wireless network.

1. Connect the USB printer to the router’s USB port. 2. Download and install the NETGEAR USB Control Center utility at http://www.netgear.com/landing/en-us/readyshare.aspx. You must install this utility before you can use the ReadySHARE Printer feature. 3. Follow the instructions in the utility to connect to the printer.

Manual Method

NETGEAR recommends that you do not change the preset SSID and password. If you do change the settings, the information on the bottom of the product does not apply.

1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (smartphone, laptop, computer, or gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The SSID is located on the product label on the bottom of the router.

For more information about ReadySHARE Printer, see the JR6150 product information page at http://www.NETGEAR.com/success/JR6150-en.aspx. Support

Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources.

3. Enter the preset password (or your custom password if you changed it), and click Connect . 4. Repeat steps 1–3 to add other wireless devices.

Find the preset wireless settings on your router and record them here:

WPS Method

WiFi network name (SSID)

If your wireless device supports WPS (Wi-Fi Protected Setup), which NETGEAR calls Push 'N' Connect, you might be prompted to press the WPS button on the router instead of entering a password. If this happens:

You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface. Download the free Live Parental Controls centralized Internet site filtering software for your router from http://www.netgear.com/lpc. For additional features, including traffic metering, ReadySHARE, guest access, and others, log in to your router at http://www.routerlogin.net.

Network key (password)

If you change the preset wireless settings, record them here:

1. Press the WPS button on the router.

Wireless network name (SSID)

2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices.

For the complete EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/.

Network key (password)

InternetWiFi ConnectionRouter Settings STATUS GOODSTATUS ConnectedClick here Network MapParental ControlsReadySHARE Number of devices 16Click hereClick here

If necessary to retrieve or update your password, enter http://www.routerlogin.net in a web browser and log in using the default user name (admin) and password (password).

Download the free Desktop NETGEAR genie

Automatically fix common network problems and

easily manage your home network connections.

Select Wireless Settings to locate your wireless password.

http://www.NETGEAR.com/genie

NETGEAR JR6150 — WPS Method diagram (page 2)
Fig. 8 · WPS Method

NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. For indoor use only. Valid in all EU member states, EFTA states, and Switzerland.

April 2013

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the NETGEAR JR6150

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the NETGEAR JR6150

Be the first to ask — other owners or our team will answer.

Original document

NETGEAR JR6150 manual PDF

2 pages·907 KB·Network Router·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…