
Card
User manual

Second Edition (V2) Oct. 2012
Copyright © 2012 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Safety information........................................................................................ v
Trademarks................................................................................................... v
License.......................................................................................................... v
1. Introduction...................................................................................... 1
1.1 Package contents 1
1.2 System requirements 1
1.3 Specifications summary 2
3. Installing the hardware.................................................................... 6
3.1 Installing the audio card 6
3.2 Connecting to a TV tuner card 7
5. Connecting speakers and peripherals........................................... 9
5.1 Connecting digital speaker systems (Home Theater) 9
5.2 Connecting stereo headphones 10
5.3 Connecting Analog Speaker Systems 12
5.4 Connecting microphone 16
5.5 Connecting Line-In audio sources 17
6.1 Xonar Audio Center GUI 18
6.2 Main Setting 20
6.3 Mixer/Volume 28
6.4 Effects 31
6.5 Karaoke 33
6.6 FlexBass 35
6.7 AEC (Acoustic Echo Cancellation) 36
6.8 Smart Volume Normalization 38
6.9 DS3D GX and DSP Modes 40
6.10 VocalFX 42

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit http://support.asus.com Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com

This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
Xonar and ASUS logo are trademarks of ASUSTek Computer Inc. “Dolby” and “Dolby Digital Live”, “Dolby Pro Logic IIx”, “Dolby Virtual Speaker”, “Dolby Headphone” are trademarks of Dolby Laboratories. EAX and A3D are trademarks of Creative Technology Ltd. Microsoft, DirectSound3D, Windows are trademarks of Microsoft Corporation. Other company and product names may be trademarks of the respective companies with which they are associated. ASIO is a trademark and software of Steinberg Media Technologies GmbH
Dolby Master Studio driver is manufactured under license from Dolby Laboratories.




(continued on the next page)

*Specifications are subject to change without notice.



Audio ports


Before you proceed with the following installation steps, it’s recommended that you disable your onboard audio device in your BIOS settings, or uninstall any other audio cards on your PC. (For BIOS setting or uninstallation of other sound cards, refer to the user manuals of your motherboard and audio card.)


of the Xonar DGX card.
For optimum TV audio quality, Xonar DGX uses ADC recording to digitize the signal and loops it back to DAC playback. Select Aux-In as the recording source in the Xonar DGX Center’s recording mixer and enable the monitoring button to pass this signal to the audio output. Using this setup, you can even turn on sound effects such as Dolby Headphone to expand the stereo TV audio to 5.1 channel surround sound in any set of headphones. TV audio on your PC will become even better than on your TV set.

Ensure that you have installed the audio card driver before installing the Xonar DGX driver. Otherwise, driver installation error may occur.
The version and content of the support CD are subject to change without notice.



The Xonar DGX makes playback through your home theater system possible, creating an immersive and impressive cinema surround sound experience. A single digital cable connection can carry high-quality digital audio from any of your PC audio sources to any digital speakers or AV Receivers.

1 Optical cable Plug your decoder’s TOSLINK optical cable into the S/PDIF- Out connector.
SPDIF Out

1 Front Out/Headphone Jack
The Front Out jack has a built-in high-quality amplifier to drive headphones. Connect your stereo headphones directly to this jack.


1 Front Out Connect the front-channel 3.5mm plug of your 5.1 headphone into this jack.
2 Side Surround Out Connect the surround-channel 3.5mm plug of your 5.1 headphone into this jack.
3 Center/Subwoofer Out Connect the Center/Bass-channel 3.5mm plug of your 5.1 headphone into this jack.


1 Front Out Connects to the “left front” and “right front” input ports of the analog amplifier with the mini-jack to RCA cable.
2 Side Surround Out Connects to the “left surround” and “right surround” input ports of the analog amplifier with the mini-jack to RCA cable.
3 Center/Subwoofer Connects to the “Center” and “subwoofer” input ports of the analog amplifier with the mini-jack to RCA cable.

2 Speakers


1 Front Out/Headphone Jack
Connect the 2/2.1 speaker set’s 3.5mm plug into this Front Out jack.

4 Speakers


1 Front Out Connects to the Front input port of the 4/4.1 speakers with the mini-jack cable.
2 Side Surround Out Connects to the Surround input port of the 4/4.1 speakers with the mini-jack cable.

5.1 Speakers

1 Front Out Connects to the Front input port of the 5.1 speakers with the mini-jack cable.
2 Side Surround Out Connects to the Surround input port of the 5.1 speakers with the mini-jack cable.
3 Center/Subwoofer Connects to the Center/Subwoofer input port of the 5.1 speakers with the mini-jack cable.

1 Microphone Input Jack
Connect the microphone’s 3.5mm plug into this Mic-In jack for voice communication, recording, or karaoke.
2 Headphone Jack The Front Out jack has a built-in high-quality amplifier to drive headphones. Connect your stereo headphones directly to this jack.
Mic In 1 · Headphone Out


1 Line Input Jack Connect the 3.5mm plug of the CD/MP3 Player or any other Line level analog audio sources into this Line-In jack for sound recording (See the “Mixer” section of the driver guide).
Line In



If the icon could not be found in the system tray, launch the Xonar Audio Center from the Windows desktop by clicking Start > All Programs > ASUS Xonar DGX Audio > Xonar DGX Audio Center.


1 Display Area This display area shows the 10-band signal meter, volume level, and the status of the Dolby/DTS technologies, EQ, and DSP modes.
2 Menu Open/Close Clicking this button will move the display area and reveal the configuration area below. Clicking it again will move the display area back down.
3 Master Volume This rotary knob controls the master playback volume. Drag the small circle inside it to change the volume level.
4 SVN Button Click this button to enable the “Smart Volume Normalization” feature for constant volume from all playback sources. It will display a blue light when enabled.
5 Mute Button Click this button to mute audio playback; it will display a red light when playback is muted.
6 DSP Mode These 2 buttons give access to quick gaming surround sound effect (GX2.5) and effect-free (Hi-Fi) modes.
7 Setting Menu Panel This panel gives access to setting tabs, including Main Settings, Mixer/volume, Effects, Karaoke, FlexBass, and VocalFX.
8 Information icon Clicking this icon will pop up driver’s Information window.

The Sample rate determines the number of audio samples per second that the Digital-to-Analog Converters (DAC) and S/PDIF digital interface will output. The Xonar DGX audio card can support sample rates up to 96KHz (44.1K, 48K, 96KHz). Usually audio CDG and MP3 files are 44.1KHz; DVD-Video uses 48KHz; DVD-Audio or other HD media may contain 96KHz high-definition audio content. Please select the corresponding sample rate for your playback sources to get the best audio fidelity.

1 Sample Rate Select the sample rate that corresponds to (or exceeds that of) your playback sources, for optimal audio fidelity. The Xonar DGX card supports sample rates up to 96KHz (44.1K, 48K, 96K). Typical values:
-Audio CD, MP3, WMA, Wave files are 44.1KHz;
-The audio of DVD-Video is 48KHz;
-DVD-Audio or other HD media may contain 96KHz high- definition audio content.

Headphone

1 Analog Out The Analog Out setting is used to match your actual speaker setting, such as headphones, 2 speakers (or 2.1), 4 speakers (or 4.1), 5.1 speakers, Front Panel Headphone and Front Panel 2 speakers (or 2.1). Xonar DGX will play the channels and do the proper 3D surround sound processing accordingly. Select the correct speaker type for your connected speakers.
2 Speaker Test Click this button to show the speaker test window in the right pane. Click the “play” button to test each speaker one by one or click each speaker manually to test.
3 HP Advanced Setting Clicking this button allows you to select the gain tuning according to your usage scenario or matching headphone impedance. The setting is also available for FP Headphone.
Usage scenario or Headphone impedance DAC setting Exciter Mode or for >64ohms headsets 16 dB boost Pro-gaming Mode or for 32~64ohms headsets 9 dB boost VOIP Mode or for
4 Dolby Headphone enable/disable
Tick this checkbox to enable Dolby Headphone. Click the textbar to switch the right window to Dolby Headphone page for manual adjusting. * 7.1 Virtual Speaker Shifter can be selected only when Dolby Headphone is enabled.


1 Analog Out The Analog Out setting is used to match your actual speaker setting, such as headphones, 2 speakers (or 2.1), 4 speakers (or 4.1), 5.1 speakers, Front Panel Headphone and Front Panel 2 speakers (or 2.1). Xonar DGX will play the channels and do the proper 3D surround sound processing accordingly. Select the correct speaker type for your connected speakers.
2 Speaker Test Click this button to show the speaker test window in the right pane. Click the “play” button to test each speaker one by one or click each speaker manually to test.


1 Analog Out The Analog Out setting is used to match your actual speaker setting, such as headphones, 2 speakers (or 2.1), 4 speakers (or 4.1), 5.1 speakers, Front Panel Headphone and Front Panel 2 speakers (or 2.1). Xonar DGX will play the channels and do the proper 3D surround sound processing accordingly. Select the correct speaker type for your connected speakers.
2 Speaker Test Click this button to show the speaker test window in the right pane. Click the “play” button to test each speaker one by one or click each speaker manually to test.
3 Speaker Swap Clicking this button will pop up an advanced setting window to allow you to: – Swap center/bass outputs for 5.1-speaker set ups Check the box if your speakers are outputting the incorrect channel. Otherwise, leave them blank.


It enables a single digital connection to carry high quality audio from your PC to digital speakers and AV Receivers.

1 S/PDIF Out enable/ disable
Click this check box to enable S/PDIF output.
2 S/PDIF Output Formats/Functions
PCM (Pulse Code Modulation, which is a typical raw audio data format.)

This setting only appears in Windows Vista. Vista will deliver the audio channels to the audio driver according to this setting, no matter what the original audio content is or how many channels they have. Therefore, you need to set this in accordance with your audio content before you play it. Please note that this setting is synchronized with Vista’s system speaker configuration and changing the setting during playback will cease the audio playback program. You may have to restart the program after the change. It’s recommended that you close all playing programs before you change the setting.

1 Audio Channels Here are some typical suggestions:
-MP3, WMA, AAC, CD, VCD, 2D games => 2 channels
-DVD-Video with Dolby Digital or DTS 5.1 => 6 channels
-DVD-Video with Dolby Digital EX or DTS ES => 8 channels
-3D games => 8 channels

The 7.1 Virtual Speaker Shifter has the following major features:
2 3 5 6 7 8

1 Shifter enable/disable Click this check box to enable the 7.1 Virtual Speaker Shifter. Clicking the text bar will switch the right window to the Speaker Shifter page for manual adjustments.
2 Drag speaker or listener
You can drag each speaker or listener to a different relative position “virtually” using only your mouse. The Xonar DGX card will process it and virtualize each speaker position in real-time. The Subwoofer has no directional sounds, and hence can be moved only closer or further away.
3 Reset Reset all Speaker Shifter settings to the defaults.
Click + to increase volume (move speakers closer); click – to decrease volume (move speakers further away)
5 Counter-clockwise Make all speakers (except Subwoofer) rotate counter- clockwise
6 Clockwise Make all speakers (except Subwoofer) rotate clockwise
7 Manual Rotation Manually drag and rotate all speakers (except Subwoofer)
8 Manual Drag Mode This is the default mode that allows you to manually drag each speaker or the listener with your mouse.
4 Increase/decrease volume


1 Dolby Headphone enable/disable
Tick this checkbox to enable Dolby Headphone. Click the textbar to switch the right window to Dolby Headphone page for manual adjusting. * 7.1 Virtual Speaker Shifter and Dolby Pro-Logic IIx can be selected only when Dolby Headphone is enabled.
2 DH1 Dolby Headphone (DH) provides three room filters that may be used with any type of audio. They differ in the sense of the “spatial dimension” they impart.
DH1—Reference Room: Small, acoustically damped room.
4 DH3 DH3—Larger Room: Larger room than DH1; more distant and diffused effect.

The mixer page is designed to control the volume for playback and recording on the Xonar DGX. In addition, the Xonar DGX also provides a high-quality digital monitoring function for hearing the recorded audio from the speakers.

1 Playback volume tab Click this button to show the playback volume page.
2 Source / path name This shows the source name for each volume control slider, including: - WAVE: All digital audio sources except MIDI files - SW: Software Synthesizer; control the playback volume of the MIDI files - CD: CD-ROM digital playback (CD-DA) volume control - LEFT, RIGHT…: the volume control for each speaker/ channel NOTE: Windows® Vista does not support WAVE, Synthesizer and CD-In volume controls.
3 Mute button Click this button to mute the audio channel; click this button again to restore the audio output.
4 Volume slider Drag this slider down to decrease the volume; drag it up to increase the volume. The tool-tip reveals the percentage number from 1 to 100 in terms of the full scale level.
5 Left/Right balance The horizontal slider controls the volume between the left and right channels. (On Windows XP only)
6 Reset Reset all volume controls to the default settings.


1 Recording Volume Tab Click this button to show the recording volume page.
2 Left/Right balance The horizontal slider controls the volume between the left and right channels.
Drag this slider down to decrease the recording volume; drag up to increase the recording volume. The tool-tip reveals the percentage number from 1 to 100 in terms of the full scale level.
3 Recording volume slider
4 Recording Selector button
Click this button to select the path/source you are going to record. Note that the recording function on Windows is a one-path selector. So, you can select only one default recording source at a time. You may have to restart the recorder program if you switch to a different source. (Note: On Vista, some application programs may allow you to select the recording device/path in the recording programs themselves.)
5 Microphone-In Advanced Setting Click this button
to open the advanced settings for the Microphone-In:
Enabling “Microphone Boost” will increase a volume gain to boost microphone input signals. For typical low-cost PC microphone, it’s recommended to enable this function. You can check with “Front Mic” to enable microphone of front panel.
(continued on the next page)

6 Monitoring button Click this button to monitor and loopback recording audio to outputs (PC speakers). Therefore, the recording volume will influence the monitoring signals from speaker outputs. The audio will be mixed into the streams you are playing out from your PC and all DGP effects will be applied to the source, too.
7 Source / path name This shows the source name for each volume control slider, including:
Aux) and digital wave audio (Wave) you are playing on PC
or other sound sources
8 Reset Click to reset all volume controls to the default settings.

Environment effects can be used to create realistic listening experiences that mimic different environments. There are a total of 27 environment options, which can be applied to all 2D sound sources, like music.

1 Default environments These four buttons activate Bathroom, Concert hall, Underwater, and Music Pub environments, respectively.
2 More options Clicking this button will apply the environment effect that you select from the pull-down menu on the right side. There are another 23 options in this menu.
3 Environment size There are three size settings for each environment: Large, Medium, and Small.

The equalizer can modify the audio output for different frequencies, and be used to compensate for deficiencies in your speakers/systems. There are 12 default patterns and you can also make your own settings.

2 4 5 6
There are 12 available equalizer patterns. Click one to apply it.
1 Default equalizer options
2 User Defined You can click this button to apply your own defined parameters saved in the pull-down menu.
3 Equalier slider Adjust the gain for each band (30~16KHz)
4 Save name Key in a name for your own “User Defined” equalizer setting
5 Add / save Click this “+” button to save the parameters into User Defined list
6 Delete Click this “–” button to delete the parameters from User Defined list

The Xonar DGX provides powerful features for Karaoke, including Key-Shifting, Vocal Cancellation, and Microphone Echo. Microphone Echo can generate natural echo effects on your singing voice just like a karaoke machine. Key-Shifting can change the pitch of Karaoke background music, and Vocal Cancellation can reduce the original vocal in songs and keep the music and symphony for karaoke.

1 On/Off Click the switch to turn on or off the functions on this page.
2 Key-Shifting Check the box to enable or disable the key shifting feature for music playback from 4 semitones below, to 4 semitones above.
3 Vocal Cancellation Check the box to enable or disable the vocal cancellation function and adjust the voice cancellation level from 0 to +100. +100 will eliminate most original vocals (default value is 50).
4 Mic Echo Select the Mic Echo function and adjust the gain for echo signals (30~16KHz)
5 Reset Reset all settings to the default.

The following message appears when Mic Echo is selected:

This message implies that the recording device will be set according to your requirement. With Mic, you will only record audio source from microphone with echo effects; but you are able to record all audio sources from Wave, Aux, and Mic with microphone echo effect. Click OK to accept it or Cancel if you want to enable it later. Checking Don’t remind me again and this message will not show up again.

FlexBass, an advanced bass management and enhancement mechanism, allows you to select each satellite speaker’s type for optimal sound performance from the speakers. (Small: common speaker that cannot produce low frequencies; Large: wide-band speakers that can produce low frequencies well). It comes with an adjustable crossover frequency for the boundary of the bass signals. FlexBass will filter out the bass signals from small speaker channels and redirect them all to the subwoofer or Large speakers.

1 On/Off Click this switch to turn on or off all functions on this FlexBass page.
2 Small / Large speaker option
Select the speaker type that you connected. If your speaker type cannot perform low-frequency signals (bass), select “Small” speaker type and Xonar DGX will filter out the bass signals and send them to the subwoofer channel. If those speakers are full-range, you can select the “Large” speaker type.
3 Picture for Small/ Large speaker
Colors for small/large speakers are different.
4 LFE Crossover Frequency
Adjusts the cut-off frequency (50~250Hz) for LFE (low- frequency effects) signals. Xonar DGX will filter out the bass signals below the crossover frequency from small speaker channels and forward them to the subwoofer. The higher the crossover frequency, the more bass signals will be subtracted.

Xonar DGX provides advanced Acoustic Echo Cancellation (AEC) for best voice communication quality over your speakers. AEC technology can eliminate up-to- 40dB speaker echo return and suppress noises into your microphone for easier conversation experience. AEC is an innovative feature to make Xonar DGX the best sound card choice for online chatting in VOIP applications (Skype, MSN, Google, QQ, etc.) or online gaming. AEC provides the following benefits to you:
To achieve the best performance of AEC function, the ideal system requirements are as follows:
AEC function will be only suitable for bi-direction voice communication applications. The speaker type will be set as 2 speakers and special voice processing mode while AEC is applied (all audio effects will be suspended and those controls on audio center will be frozen.). After you finish the voice-over- IP applications, please remember to turn it off for normal high-fidelity audio playback mode.


1 AEC Click AEC function page.
2 Enable AEC Click the checkbox to enable AEC function. A alert message will pop up:

This message implies the speaker configuration will be set to 2 speakers and all sound effect processors will suspended except AEC function. Click “OK” to accept it; Click “Cancel” if you want to enable it later. Check “Don’t remind me again” will not show this message again.

Smart Volume NormalizationTM (SVN) automatically keeps all music or video/TV audio output at a constant level to reduce manual adjustment hassles inherent with sound sources of different loudness. It allows you to listen to various content, like MP3, TV program, DVD video and even games with consistent sound level. The following graph shows how different signals 1 & 2 will become the same level (for example, 10dB below full scale) after you turn on SVN. Please note that for lower volume music 2, it will become louder when you turn on SVN; and for higher volume music 1, it will become quieter.
SVN Off SVN On

1 SVN On/Off Click this button to enable SVN. This button is outlined blue when active.
2 SVN display When SVN is enabled, “Smart Volume” will be lit up at the bottom of the volume meter and the volume meter will show the level.
3 SVN blue light When SVN is enabled, the master volume knob will be illuminated by a blue light. It will be lit red if the volume is muted.

Xonar DGX is introducing an innovative technology –DirectSound 3D Game Extensions v2.5 (DS3D GX 2.5)- to restore DirectSound 3D Hardware acceleration mode and its subsidiary EAX effects on Windows Vista for 3D games. Unlike some proprietary API like OpenAL, DS3D GX doesn’t require games to support OpenAL API. All existing games compatible with Microsoft DirectX and DirectSound 2D/3D will be supported with DS3D GX technology. Before you start EAX and DS3D HW games, enable DS3D GX on the Xonar Audio Center, and disable the function after the games.
In addition, Xonar DGX also offers a Hi-Fi mode for hi-fidelity playback without any effect processing to keep the original audio fidelity. Every time you turn on Hi-Fi mode, Xonar DGX will clear all sound effects. It’s also recommended to use Hi-Fi mode for audio quality tests (using RMAA software or another machine-based measurement). Use the DSP mode button as the quick setup if you don’t wish to know the details of the effect setup.
No sound effects will be applied to high-definition 96KHz/192KHz content.

1 GX Mode DirectSound 3D Game Extensions mode to support EAX and DirectSound 3D Hardware extensions for lots of DirectX/ DirectSound3D games on Windows 7 / Vista / XP.
2 Hi-Fi Mode This mode is set for Hi-Fidelity playback, where all effects will be cleared to keep the original digital data and analog output quality as high as possible.

VocalFX is an innovative voice processing technology to let your voice get into the realistic game landscape (VoiceEX) or to emulate the background scenes in online chat (ChatEX). It also allows you to change your voice pitch to disguise who you are (Magic Voice). These features dramatically increase the fun for voice communication on PC.

1 VoiceEX It produces realistic and dynamic environmental reverberation for your voice in 3D gaming communication.
2 Local VoiceEX It produces realistic and dynamic environmental reverberation for your voice in 3D gaming communication.
(You can hear your voice form speakers)
3 App List You can add VOIP application into VOIP application List.
4 ChatEX It emulates different background environment effects when you chat online.
5 Magic Voice Changes your voice pitch to different types for disguising your real voice or just for fun in online chatting.





* Click the checkbox to enable VocalFX function, then a prompt message will pop up:

This message implies the record device will be set to microphone. Make sure the GX function is enabled. Click “OK” to accept it, or “Cancel” if you want to enable it later. Check “Don’t remind me again” if you don’t want to see this message pop up next time.
* Microphone input source must be selected from advanced setting under MIC volume control slider in Mixer page.



The audio card driver could not be installed on my PC.
Instructions:
Instructions:

Instructions:
Instructions:
Instructions:
Answer:
Yes, the Xonar DGX driver package does support Windows 7/Vista 32/64 bit and most key features are available. In addition, Xonar DGX supports unique DS3D GX on Windows 7/Vista, which can recover DirectSound 3D hardware and EAX gaming sound effects on Windows 7/Vista for a lot of existing DirectX games.

Answer:
Dolby is the ONLY brand and technology recognized by the CE industry and available on a wide range of audio equipment. Xonar DGX includes the feature to make your PC a powerful media and entertainment center.
Answer:
Yes, Xonar DGX can support the latest EAX on Windows 7/ Vista /XP through innovative DirectSound3D Game EXtensions v2.5 (DG3D GX 2.5) technology.
Answer:
Dolby Headphone is the best 3D sound positioning, spatial modeling and 5.1- channel virtualization technology for regular stereo headphones and speaker headphones.
Q5: What is the most important benefit of the Xonar DGX for gamers?
Answer:
The S/PDIF protocol specification (IEC-60958) can only carry 2-channel PCM data or non-PCM AC3/DTS data. So, when a user selects PCM output for S/PDIF, the Xonar sound card will always deliver 2 channel PCM data through the S/PDIF output port.

Answer:
Different from Windows XP, Vista has a multiple devices/streams concept in audio structure, in which the concept can be categorized into Digital Input and Analog Input. In other words, multiple recording devices can be used and working at the same time. In this case, Wave In or SPDIF-In, considered as a Digital Input, is an independent recording device from Analog Devices such as Mic In, Line In, or Aux In. Therefore, if you have analog inputs other than Wave In and set to be monitored, you are able to hear and even record sound from those analog devices even Wave In / SPDIF-In is selected as the default recording device.
If you don’t want to hear the analog input sounds at that situation, simply turn off “monitoring” function on other analog input devices.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.