EN
Topcom logo
Official user manual

Topcom 6000

425 pages·2.5 MB·Cell Phone·PDF·EN
Topcom 6000
Table of Contents 26 sections EN G L I S H · IN STALLAT I O N G U I D E · Dear customer · SAFETY INFORMATION · … ShowHide
Page 1 of the Topcom 6000 user manual
Page 1 · click to enlarge
Page 1
Topcom 6000 diagram (page 1)
Fig. 1
Page 2 of the Topcom 6000 user manual — A
Page 2 · click to enlarge
Page 2
Topcom 6000 diagram (page 2)
Fig. 2
Topcom 6000 diagram (page 2)
Fig. 3

A

B

D

E

F

Page 3 of the Topcom 6000 user manual
Page 3 · click to enlarge
Page 3
Page 3 of the Topcom 6000 user manual
Page 4 of the Topcom 6000 user manual
Page 4 · click to enlarge
Page 4
Topcom 6000 diagram (page 4)
Fig. 4
Page 5 of the Topcom 6000 user manual — IN STALLAT I O N G U I D E
Page 5 · click to enlarge
Page 5
Topcom 6000 — EN G L I S H diagram (page 5)
Fig. 5

EN G L I S H

Topcom 6000 — EN G L I S H diagram (page 5)
Fig. 6

IN STALLAT I O N G U I D E

Page 6 of the Topcom 6000 user manual — Dear customer
Page 6 · click to enlarge
Page 6

Dear customer

Thank you for purchasing our product. We hope you will enjoy using it. Please read this document before you start using your new Webtalker 6000 for Skype™. If you experience any difficulties, please consult our support centre.

Conformity of the telephone with EU directives is confirmed by the CE symbol. We hereby declare that the Webtalker 6000 comply with the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EEC. The declaration of conformity is available in the user manual at www.topcom.net/cedeclarations.php

The Webtalker 6000 is covered by the European Directive 2002/96/EC which indicates that this product should not be disposed of via the normal household waste stream. To prevent possible harm to the environment or human health, please separate this product from other waste streams to ensure that it can be recycled in an environmentally sound manner. For more details on available collection facilities, please contact your local government office or the retailer from whom you purchased this product.

  • This Installation Guide covers the basic installation process and the most common features of your Webtalker. For more advanced functionality descriptions you should consult the User Manual found at <a href="http://www.topcom.net/userguides.php" rel="nofollow noopener" target="_blank">www.topcom.net/userguides.php</a>
  • Skype™, SkypeMe™, SkypeOut™, SkypeIn™, Skype Voicemail™, the whole world can talk for free™, the Skype logo and the S logo are trademarks of Skype™.

I N S TAL L AT I O N G U I D E

Page 7 of the Topcom 6000 user manual — 7 INS TALLAT ION GUIDE
Page 7 · click to enlarge
Page 7

SAFETY INFORMATION

Intended Use This telephone is designed for telephoning within a standard telephone network and the Internet. Any other use is considered unintended use. Unauthorised modifications or reconstruction not described in this manual are not permitted.

  • Safety information General
  • Only use the power supply included with the product. Using an unauthorised power supply will invalidate the product guarantee and may damage the telephone. Only use the following power supply for the Webtalker 6000: Salom SSW1328.
  • Use only approved Nickel Metal Hydride (Ni-MH) rechargeable batteries for the handset. Never use other batteries or conventional alkaline batteries, as they could cause a short-circuit or destroy the battery casing, or be harmful to the health and cause personal injury. Use only batteries recommended by the manufacturer.
  • Even though the key lock is switched on, it is still possible to make emergency calls (see instructions for details).
  • Do not open the handset (other than to change batteries) or base station. This could expose you to high voltages or other risks.
  • Radio signals transmitted between the handset and base may cause interference with hearing aids.
  • This product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.
  • Do not install the base in bathrooms or shower rooms. The handset and base are not watertight.

7 INS TALLAT ION GUIDE

Page 8 of the Topcom 6000 user manual — SAFETY INFORMATION
Page 8 · click to enlarge
Page 8
  • Do not use the telephone in environments subject to explosion hazard (e.g. auto paint shops).
  • Cleaning
  • Simply clean the handset and base station with a damp (not wet) cloth, or an anti-static wipe.
  • Never use household polish, as this will damage the product.
  • Never use a dry cloth as this may cause a static shock.
  • Environmental
  • Do not expose the product to direct sunlight.
  • The product may heat up when the batteries are being charged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.
  • Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surface.
  • Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms.
  • Do not expose your product to fire, explosive or other hazardous conditions.
  • There is a slight chance that your product could be damaged by a thunder storm. We recommend that you unplug the power and telephone line cord and switch off your computer during a thunder storm.

8 I N S TAL L AT I O N G U I D E

Page 9 of the Topcom 6000 user manual — SAFETY INFORMATION
Page 9 · click to enlarge
Page 9
Page 9 of the Topcom 6000 user manual — SAFETY INFORMATION
Page 10 of the Topcom 6000 user manual — I N T H E B O X
Page 10 · click to enlarge
Page 10

In the box

  • 1 cordless Webtalker handset
  • 1 charging cradle for the handset with power supply
  • 1 Webtalker base station
  • 1 power supply for the base station
  • 1 Ethernet cable
  • 1 telephone cable
  • 1 belt clip
  • 1 Installation Guide
  • 2 batteries (AAA; rechargeable)
  • 1 SkypeOut voucher
  • Telephone plug(s) (not all countries)

Should anything be missing, please contact your place of purchase.

I N T H E B O X

Page 11 of the Topcom 6000 user manual — Y OUR HANDS E T AT A GLANCE
Page 11 · click to enlarge
Page 11

Your handset at a glance

Please refer to the left flap of this Installation Guide for illustration for your handset at a glance.

NO.ITEMFUNCTION AEarpiece BColour displayDisplays the status of your handset. CLoudspeaker/ ringerFor handsfree speakerphone and ringing (on the back of the Webtalker). DHeadset jack connectorFor 2.5 mm jack (on the side of the Webtalker). EKeypadKeys used for entering digits 0-9 and letters A-Z. FMicrophone

Left soft Key. Selects the current menu item or confirms a setting, depending on the current screen. Right soft Key. Cancels the last action or returns to the previous screen, depending on the current screen. Call key. Initiates or answers a call. End/power key/Skype status. When in call, ends a call. Turns the phone on or off by pressing and holding. From idle, provides access to Skype status menu with a short key press.

Y OUR HANDS E T AT A GLANCE

Page 12 of the Topcom 6000 user manual — Your handset at a glance
Page 12 · click to enlarge
Page 12

Navigation keys/Enter key. The outer keys navigate up, down, left and right. The Enter key in the centre selects/confirms a setting.

When you are in text editor, changes to lower-case, upper-case or numeric entry. When you make a landline call, you can send a #-key by pressing the key shortly. If you wish to switch between an ongoing call and a call waiting, press the key down for a longer period of time. When you are in text editor, provides a symbol table.

Y O U R H A N D S E T AT A G L ANCE

Page 13 of the Topcom 6000 user manual — How to install the base station
Page 13 · click to enlarge
Page 13

How to install the base station

Please refer to the right flap of this Installation Guide for illustrations for the installation of the base station.

a) Connect on the base station to a LAN (Local Area Network) port on your broadband connection (modem, router, hub, switch etc.) using the provided Ethernet cable.

b) Connect the power adapter to an active power outlet and

connect on the base station to the power adapter (12 V, 300 mA, 3.6 VA).

c) Connect on the base station to a telephone socket (if available), using the provided telephone cable and optional plug.

  • The light indicator on the front has two functions:
  • Always on confirms that the Ethernet cable is connected.
  • Blinking indicates that the Ethernet cable is not connected.

H OW T O INS TALL T HE BAS E S TAT IO N

Page 14 of the Topcom 6000 user manual — How to install the handset
Page 14 · click to enlarge
Page 14

How to install the handset

Please refer to the right flap of this Installation Guide for illustrations for the installation of the handset.

1) Push the top of the battery compartment cover on the back of the handset inwards and downwards. 2) Insert the two batteries provided with the handset, making sure that their plus and minus ends are facing the same way as shown in the illustrations on the sides of the battery compartment. 3) Slide the battery compartment cover shut. 4) Affix the belt clip as illustrated. 5) Connect the power adapter of the charging cradle to an active power outlet. 6) Place the handset in the charging cradle to charge the batteries. 7) Wait for 10 minutes and the batteries will be ready for first-time start-up.

  • After completion of the full installation procedure we recommend that you charge the batteries fully before first use. This takes approximately 6 hours.
  • Normally, you need to be within 50 m of the base station to connect successfully.

H O W T O I N S TA L L T H E H ANDS E T

Page 15 of the Topcom 6000 user manual — FIRS T T IME S TART-UP
Page 15 · click to enlarge
Page 15

First-time start-up

You must complete the following steps the fi rst time you use your Webtalker. Start by turning on the handset by pressing

until the handset turns on.

Topcom 6000 — First-time start-up diagram (page 15)
Fig. 7 · First-time start-up
1. Reset the base station by pressing the button on the back of the unit and insert the Webtalker in the cradle in order to register with the base station. The Webtalker screen informs you when ready for next step.
Topcom 6000 — First-time start-up diagram (page 15)
Fig. 8 · First-time start-up
Topcom 6000 — First-time start-up diagram (page 15)
Fig. 9 · First-time start-up
2. Find your preferred language using , then press to select a language.
Topcom 6000 — First-time start-up diagram (page 15)
Fig. 10 · First-time start-up
Topcom 6000 — First-time start-up diagram (page 15)
Fig. 11 · First-time start-up
3. Confi rm your selection by pressing .
Topcom 6000 — First-time start-up diagram (page 15)
Fig. 12 · First-time start-up
4. You are then directed to the Skype Agreement . Use to read the entire text and then press to accept the agreement.

FIRS T T IME S TART-UP

Page 16 of the Topcom 6000 user manual — First-time start-up
Page 16 · click to enlarge
Page 16
Topcom 6000 — First-time start-up diagram (page 16)
Fig. 13 · First-time start-up
5. You are then directed to Country setting for landline confi guration. Use to fi nd the country you are located in, then press to select your country.
Topcom 6000 — First-time start-up diagram (page 16)
Fig. 14 · First-time start-up
6. Confi rm the country code setting by pressing . Alter your country code by inserting “ + ” followed by the country code number of your choice and press .
Topcom 6000 — First-time start-up diagram (page 16)
Fig. 15 · First-time start-up
7. If your country uses area codes, please enter the area code following the above procedure. Press to continue.
Topcom 6000 — First-time start-up diagram (page 16)
Fig. 16 · First-time start-up
8. Choose Sign in to Skype or Create new account by pressing followed by .
  • The country setting confi gures the landline telephony port.
  • If your country setting is not confi gured correctly, emergenc y calls may not work properly.
  • Emergency calls via the landline are only possible if power is applied to the base station and the landline is properly connected.

F I R S T T I M E S TA RT- U P

Page 17 of the Topcom 6000 user manual — Getting started with Skype
Page 17 · click to enlarge
Page 17

Getting started with Skype

You can confi gure your Webtalker with an existing Skype account during the fi rst-time installation, or you can optionally create a new Skype account. You only need a Skype username and password defi ned by you to create a new account. You can enter further account details when your Webtalker has been confi gured and is online.

  • Skype does not allow emergency calls. Such calls are therefore always routed to the traditional telephony port.
  • Create a new Skype account

If you do not have a Skype account, follow this procedure.

Topcom 6000 — Getting started with Skype diagram (page 17)
Fig. 17 · Getting started with Skype
1. Use to select Create new account .
Topcom 6000 — Getting started with Skype diagram (page 17)
Fig. 18 · Getting started with Skype
2. Use the keypad to enter a Skype name of your own choice and press

GE T T ING S TART E D WIT H S KY P E

Page 18 of the Topcom 6000 user manual — Getting started with Skype
Page 18 · click to enlarge
Page 18
Topcom 6000 — Getting started with Skype diagram (page 18)
Fig. 19 · Getting started with Skype
3. Use the keypad to enter a password and press . You are asked to confi rm the password by entering it again.
Topcom 6000 — Getting started with Skype diagram (page 18)
Fig. 20 · Getting started with Skype
4. You are then directed to the Skype Agreement. Use to read the entire text and then press to accept.
  • Use to change to lower-case, upper-case or numeric entry when entering your Skype name and password. Skype names can be 6-32 characters. You can use any mix of upperand lower-case characters, numbers and punctuation marks. You cannot use spaces and your name cannot begin with a number or punctuation mark. If the name is already in use, you will be prompted to try another name.
  • Use to input symbols from the symbol table.
  • Passwords can be 4-20 characters. You can use any mix of upperand lower-case characters, numbers and punctuation marks. You cannot use spaces, your password cannot begin with a number or punctuation mark, and you cannot use your Skype name as a password.
  • Please be patient as the creation of your Skype account may take several minutes to perform.

G E T T I N G S TA RT E D W I T H S K Y P E

Page 19 of the Topcom 6000 user manual — Getting started with Skype
Page 19 · click to enlarge
Page 19
  • Sign in to Skype When you have a Skype account, you can sign in to Skype. Please have your Skype name and password ready before you sign in and beware of lowercase/upper-case and special characters.
Topcom 6000 — Getting started with Skype diagram (page 19)
Fig. 21 · Getting started with Skype
1. Use to select Sign in to Skype .
Topcom 6000 — Getting started with Skype diagram (page 19)
Fig. 22 · Getting started with Skype
2. Use the keypad to enter your Skype name and press .
Topcom 6000 — Getting started with Skype diagram (page 19)
Fig. 23 · Getting started with Skype
3. Use the keypad to enter your password and press .
Topcom 6000 — Getting started with Skype diagram (page 19)
Fig. 24 · Getting started with Skype
4. You are now asked whether you want to save your Skype name and password for automatic sign-in. Press to accept, to decline.

GE T T ING S TART E D WIT H S KY P E

Page 20 of the Topcom 6000 user manual — Getting started with Skype
Page 20 · click to enlarge
Page 20
  • Use to change to lower-case, upper-case, or numeric entry when entering your Skype name and password.
  • Use to input symbols from the symbol table.
  • If you have forgotten your Skype password go to <a href="http://www.skype.com" rel="nofollow noopener" target="_blank">www.skype.com</a> and choose “ Sign in ”. Then choose “ Forgot your password? ” and follow the directions on your computer screen.
  • Please be patient as synchronization of Skype contacts might take several minutes.
  • Skype features supported by Webtalker

After you have created your Skype account, you can call other people with Skype accounts for free. Skype also offers additional subscription features, including:

SkypeOut Allows you to make calls to ordinary landline and mobile phones.

SkypeIn Provides you with an ordinary phone number for receiving Skype calls on your Webtalker from ordinary landline and mobile phones.

Skype Voicemail allows you to send and receive voicemail messages and record a greeting.

All of these features are supported by your new Webtalker and are available at www.skype.com. Please visit www.topcom.net to explore which future Skype features your Webtalker supports.

G E T T I N G S TA RT E D W I T H S K Y P E

Skype Voicemail

Page 21 of the Topcom 6000 user manual — Getting started with Skype
Page 21 · click to enlarge
Page 21
  • Main display The main display of your Webtalker provides various status indicators and access to the Skype menu-based interface. The illustration below shows the main screen and its elements.
Topcom 6000 — Getting started with Skype diagram (page 21)
Fig. 25 · Getting started with Skype
Topcom 6000 — Getting started with Skype diagram (page 21)
Fig. 26 · Getting started with Skype

Indicates the strength of the radio signal.

No radio signal. Radio signal.

Battery status Indicates the status of the battery.

Low level. Partially charged. Fully charged. Charging.

Notifi cations Displays notifi cation icons.

Missed call. New voicemail. Exchange contact details request. Silent mode is active. Keypad locked. Skype credit is close to expiry. Headset connected.

GE T T ING S TART E D WIT H S KY P E

Show 7 more labels / short text on this page
Radio signal Status · Battery status · Notifi cations · Skype™ online status · Current time · Action Action · Radio signal status
Page 22 of the Topcom 6000 user manual — Getting started with Skype
Page 22 · click to enlarge
Page 22

Indicates your current Skype online status.

Online. Away. Not available. Skype Me. Available for calls from anyone. Do not Disturb. Indicates you are busy. Offl ine (not signed in). Invisible. Still online, but unseen by others.

Current time The currently set time.

Skype credit Your current Skype credit balance.

Action Left soft key. Selects the current menu item or confi rms a setting, depending on the current screen.

Action Right soft key. Cancels the last action or returns to the previous screen, depending on the current screen.

Short cut to outgoing calls.

Short cut to all call history.

Short key press is a short cut to the Skype status menu.

Short cut to search Skype users.

Mute ringer.

G E T T I N G S TA RT E D W I T H S K Y P E

Skype online status

Page 23 of the Topcom 6000 user manual — Getting started with Skype
Page 23 · click to enlarge
Page 23
  • Main menu The main menu provides easy access to all of your Skype and Webtalker settings.
Topcom 6000 — Getting started with Skype diagram (page 23)
Fig. 27 · Getting started with Skype
1. From idle screen just press to enter the main menu.
Topcom 6000 — Getting started with Skype diagram (page 23)
Fig. 28 · Getting started with Skype
2. Use or to navigate and highlight an item. Select by pressing or go back by pressing .

The following table outlines the main menu items:

Contacts Your contact list and the current Skype status of your contacts.

History Your calls, missed calls, incoming and outgoing calls, voicemails and exchange contact details.

Add Contact Adds a Skype user or SkypeOut number to your contact list.

Status Sign in to Skype, create a new account, change your profi le, change your password, choose auto sign-in.

GE T T ING S TART E D WIT H S KY P E

Page 24 of the Topcom 6000 user manual — Getting started with Skype
Page 24 · click to enlarge
Page 24

Search Searches for Skype contacts online.

Services View Skype credit, SkypeIn and Skype Voicemail status.

Settings Settings for call divert, privacy, sounds, time and date, manage blocked users, cordless settings, phone settings, information and advanced settings.

G E T T I N G S TA RT E D W I T H S K Y P E

Page 25 of the Topcom 6000 user manual — CO NTACT S
Page 25 · click to enlarge
Page 25

Contacts

Your contact list displays all of the names you can make calls to. If you have an existing Skype account, your contact list is automatically downloaded when you sign in. If you are new to Skype and have just created an account, your contact list will be empty. You will need to add contacts to your list.

Skype protects the privacy of its users by requiring exchange contact details on names that you wish to add to your contact list. When you add a name to your list, an exchange contact details request is sent to the user. The user can accept or decline the request. When a request is accepted, you can see when your contacts are online and make calls to them. You can also view their personal profi le details.

  • Add a Skype contact To add a Skype contact, press to select Menu , then:
Topcom 6000 — Contacts diagram (page 25)
Fig. 29 · Contacts
1. Use to go to Add Contact , select by pressing .
Topcom 6000 — Contacts diagram (page 25)
Fig. 30 · Contacts
2. Press to select Skype .

CO NTACT S

Page 26 of the Topcom 6000 user manual — C O N TA C T S
Page 26 · click to enlarge
Page 26
Topcom 6000 — C O N TA C T S diagram (page 26)
Fig. 31
3. Use the keypad to enter the Skype name or full name and press .
Topcom 6000 — C O N TA C T S diagram (page 26)
Fig. 32
4. Confi rm by pressing back or send a request to exchange contact details by pressing .
  • After you press in step 4, an exchange contact details request is sent to the contact. When it has been sent, a confi rmation message is displayed. The name is added to your contact list, and when accepted by the contact it will change status.
  • Please be patient as synchronization of Skype contacts might take several minutes.
  • Use “ echo123 ” to test your Skype connection. Add “ echo123 ” to your contacts. Calling echo123 will launch an automated testing robot that allows you to record and play back sound.

C O N TA C T S

Page 27 of the Topcom 6000 user manual — CO NTACT S
Page 27 · click to enlarge
Page 27
  • Add a SkypeOut or landline contact

To add a SkypeOut or landline contact, press to select Menu, then:

1. Use to go to Add Contact , select by pressing .
Topcom 6000 — C O N TA C T S diagram (page 27)
Fig. 33
2. Use to enter a phone number for use with SkypeOut or landline. Select by pressing .
Topcom 6000 — C O N TA C T S diagram (page 27)
Fig. 34
3. Use the keypad to enter the contact’s name and press .
Topcom 6000 — C O N TA C T S diagram (page 27)
Fig. 35
4. Use the keypad to enter the full phone number and press . SkypeOut numbers (even local numbers) must be entered in the following format: “ + ” followed by “ country code ”, “ area code ” and “ number ”.

CO NTACT S

Page 28 of the Topcom 6000 user manual — C O N TA C T S
Page 28 · click to enlarge
Page 28
  • Use to change to lower-case, upper-case or numeric entry.
  • Use to input symbols from the symbol table.
  • SkypeOut allows you to make calls to traditional landline and mobile phones. Go to <a href="http://www.skype.com" rel="nofollow noopener" target="_blank">www.skype.com</a> to learn more about SkypeOut.

C O N TA C T S

Page 29 of the Topcom 6000 user manual — CO NTACT S
Page 29 · click to enlarge
Page 29
  • Search for Skype users

To search for Skype users, press to select Menu, then:

Topcom 6000 — C O N TA C T S diagram (page 29)
Fig. 36
Topcom 6000 — C O N TA C T S diagram (page 29)
Fig. 37
1. Use to go to Search , select by pressing .
Topcom 6000 — C O N TA C T S diagram (page 29)
Fig. 38
2. Use the keypad to enter the Skype name or full name name and press .
Topcom 6000 — C O N TA C T S diagram (page 29)
Fig. 39
3. Use or to navigate and highlight a name from the list, select by pressing .
Topcom 6000 — C O N TA C T S diagram (page 29)
Fig. 40
Topcom 6000 — C O N TA C T S diagram (page 29)
Fig. 41
4. Use to highlight Add to contacts , select by pressing .

CO NTACT S

Page 30 of the Topcom 6000 user manual — C O N TA C T S
Page 30 · click to enlarge
Page 30
  • Use to change to lower-case, upper-case or numeric entry.
  • Use to input symbols from the symbol table.
  • Other options available during a search include: Search again – Repeats the search. Call – Calls the selected name. View profile – Displays the selected name’s profile.
  • You can stop a search at any time by pressing .

C O N TA C T S

Page 31 of the Topcom 6000 user manual — MAK E AND RE CE IVE CALLS
Page 31 · click to enlarge
Page 31

Make and receive calls

The procedures for making and receiving calls apply to any type of call – Skype-to-Skype calls, SkypeOut calls and SkypeIn calls. Furthermore, you can use your phone for landline telephony.

  • Call a Skype contact To make a Skype call:
Topcom 6000 — Make and receive calls diagram (page 31)
Fig. 42 · Make and receive calls
1. Press to select Contacts .
Topcom 6000 — Make and receive calls diagram (page 31)
Fig. 43 · Make and receive calls
2. Use or to select a contact from the list.
Topcom 6000 — Make and receive calls diagram (page 31)
Fig. 44 · Make and receive calls
3. Press to call. Wait for the call to connect, ring, and be answered. Press to end the call.

MAK E AND RE CE IVE CALLS

Page 32 of the Topcom 6000 user manual — Make and receive calls
Page 32 · click to enlarge
Page 32
  • Dial a landline number To dial a landline number:
Topcom 6000 — Make and receive calls diagram (page 32)
Fig. 45 · Make and receive calls
1. Use the keypad to enter the number. Press to call the number.
Topcom 6000 — Make and receive calls diagram (page 32)
Fig. 46 · Make and receive calls
Topcom 6000 — Make and receive calls diagram (page 32)
Fig. 47 · Make and receive calls
2. Use to select landline or SkypeOut and press .
Topcom 6000 — Make and receive calls diagram (page 32)
Fig. 48 · Make and receive calls
Topcom 6000 — Make and receive calls diagram (page 32)
Fig. 49 · Make and receive calls
3. Wait for the call to connect, ring and be answered. Press to end the call.
  • You can select a preferred line for dialing by going to Menu > Settings > Phone settings > Preferred line. Choose one of the following options: 1) Always landline 2) Always SkypeOut 3) Always ask

MAK E A N D R E C E I V E C A L LS

Page 33 of the Topcom 6000 user manual — MAK E AND RE CE IVE CALLS
Page 33 · click to enlarge
Page 33
  • Receive a call When someone calls you, the ringing tone sounds and the incoming call message is displayed. To receive a Skype, SkypeIn or landline call:
Topcom 6000 — Make and receive calls diagram (page 33)
Fig. 50 · Make and receive calls
1. Press to receive the call.
2. Press to end the call.

MAK E AND RE CE IVE CALLS

Page 34 of the Topcom 6000 user manual — PROBLEM POSSIBLE CAUSE
Page 34 · click to enlarge
Page 34

Troubleshooting

Check www.topcom.net for more information.

PROBLEM POSSIBLE CAUSE

My Webtalker does not work

  • The software needs to be updated to the latest version.

I cannot sign in to Skype

  • Skype does not accept your Skype name and/or password.
Screen displays“Network connection lost” and the base station light indicator is blinking slowly
  • The Ethernet cable is not connected.

I cannot make a Skype call

  • The Ethernet cable is not connected.
  • The router or the modem is not turned on.
  • The base station cannot retrieve the. IP address
  • You are not signed in as a Skype user.

No display • The batteries are discharged.

T R O U B L E S H O O T I N G

Page 35 of the Topcom 6000 user manual — T RO UBLE S HO OT ING
Page 35 · click to enlarge
Page 35

This is a guide to the most common problems that may occur during installation or use of your Webtalker.

You can easily solve some of the problems yourself, but may need your broadband service provider or landline provider to help you with others.

SOLUTION

  • Go to the Setting menu and select Advanced settings and Firmware update. Select the latest software version and confirm to update.
  • Check if you are using the correct Skype name and password. Beware of upper-case/lower-case letters and numeric numbers.
  • Check that the Ethernet cable between on the base station and the LAN port on your broadband connection (modem, router, hub, switch etc.) is connected properly.
  • Check that the Ethernet cable between on the base station and the LAN port on your broadband connection (modem, router, hub, switch etc.) is connected properly.
  • Turn on the power to the modem or router and reset the base station.
  • In Internet settings, check that the IP mode corresponds to the IP mode of your Internet connection or you are behind a proxy server. Check the user manual for the proxy settings guidance.
  • Go to the status menu and select Sign in as a Skype user. From there refer to the section “Sign in to Skype” in this guide.
  • Charge or replace the batteries.

T RO UBLE S HO OT ING

Page 36 of the Topcom 6000 user manual — PROBLEM POSSIBLE CAUSE
Page 36 · click to enlarge
Page 36

PROBLEM POSSIBLE CAUSE

Handset is not registering

  • Base station is not ready for registration.
  • The charging cradle is not connected.
  • There are no batteries in the handset.
  • The base station is not connected.

No connection between handset and base station

  • You are out of range of the base station.
  • The handset is not registered.
  • The base station is not connected to power.

Handset on the charging cradle does not charge

  • The cradle is not powered.
  • The handset is not placed properly in the charging cradle.
  • The batteries are not inserted correctly.

Handset does not ring

  • The Skype status is set to offline or do not disturb.
  • The handset ringer may be off.
  • The handset may be too far away from the base station.
  • This Installation Guide covers the basic installation process and the most common features of your Webtalker.

T R O U B L E S H O O T I N G

Page 37 of the Topcom 6000 user manual — T RO UBLE S HO OT ING
Page 37 · click to enlarge
Page 37

SOLUTION

  • Reset the base station by pressing the key on the back of the base station and try to register again.
  • Make sure the power supply is properly connected to the charging cradle and that the power is on.
  • Make sure the batteries are correctly fitted into the handset. Reset the base station and try to register again.
  • Make sure that the power supply is properly connected to on the base station and that the power is on.
  • Move closer to the base station.
  • Register the handset.
  • Make sure the power supply is properly connected to on the base station and that the power is on.
  • Connect the power adapter of the charging cradle to an active power outlet.
  • Place the handset correctly in the charging cradle.
  • Check the position of the batteries.
  • Set your Skype status to online.
  • Increase the ringer volume.
  • Move closer to the base station.
  • For more advanced functionality descriptions you should consult the User Manual found at <a href="http://www.topcom.net/userguides.php" rel="nofollow noopener" target="_blank">www.topcom.net/userguides.php</a>

T RO UBLE S HO OT ING

Page 38 of the Topcom 6000 user manual — SOLUTION
Page 38 · click to enlarge
Page 38
Page 38 of the Topcom 6000 user manual — SOLUTION
Page 39 of the Topcom 6000 user manual — INSTALLATIO N S L E I T F A D E N
Page 39 · click to enlarge
Page 39

D E U T S C H

Topcom 6000 — D E U T S C H diagram (page 39)
Fig. 51

DEU T S C H

Topcom 6000 — DEU T S C H diagram (page 39)
Fig. 52

INSTALLATIO N S L E I T F A D E N

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Topcom 6000

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Topcom 6000

Be the first to ask — other owners or our team will answer.

Original document

Topcom 6000 manual PDF

425 pages·2.5 MB·Cell Phone·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…