
LG-P936 LG-P936 User Guide
This guide helps you get started using your phone. If you need more information, please visit www.lg.com








Please read these simple guidelines. Not following these guidelines may be dangerous or illegal.


Efficient phone operation Electronics devices All mobile phones may get interference, which could affect performance. • Do not use your mobile phone near medical equipment without requesting permission. Avoid placing the phone over pacemakers, for example, in your breast pocket.

Glass Parts Some parts of your mobile device are made of glass. This glass could break if your mobile device is dropped on a hard surface or receives a substantial impact. If the glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by an authorised service provider.
Avoid damage to your hearing Damage to your hearing can occur if you are exposed to loud sound for long periods of time. We therefore recommend that you do not turn the handset on or off when close to your ear. We also recommend that music and call volumes are set to a reasonable level. • When using headphones, turn the volume down if you cannot hear the people speaking near you, or if the person sitting next to you can hear what you are listening to.
Blasting area Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

Children Keep the phone in a safe place out of the reach of small children. It contains small parts which may cause a choking hazard if detached.
Emergency calls Emergency calls may not be available under all mobile networks. Therefore, you should never depend solely on the phone for emergency calls. Check with your local service provider.
Battery information and care • You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the battery’s performance.


Disposal of your old appliance 1 When this crossed-out wheeled bin symbol is attached to a product it means `the product is covered by the European Directive 2002/96/EC. 2 All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3 The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4 For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Disposal of waste batteries/ accumulators 1 When this crossed-out wheeled bin symbol is attached to batteries/ accumulators of your product it means they are covered by the European Directive 2006/66/EC. 2 This symbol may be combined with chemical symbols for mercury (Hg), cadmium (Cd) or lead (Pb) if the battery Contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. 3 All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 4 The correct disposal of your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health. 5 For more detailed information about disposal of your old batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the product.

Before you start using the phone, please read this! Please check to see if any problems you have encountered with your phone are described in this section before taking the phone in for service or calling a service representative.
aren't using, such as Wi-Fi, Bluetooth, or GPS. - Lower screen brightness and set a
shorter screen timeout. - Turn off automatic syncing for Google
Mail™, Calendar, Contacts, and other applications. - Some applications you have downloaded
and tap Settings > Applications > Manage applications. 2 When the list of applications appears, scroll and tap the application you want to uninstall. 3 Tap Uninstall and then tap OK to confirm that you want to uninstall the desired application.
may cause your battery power to be reduced. - While using downloaded applications,
check the battery charged level. To view the battery charge level 1 From the Home screen, tap the Menu Key
and tap Settings > About phone > Status. 2 The battery status (charging or not charging) and level are displayed on the

top menu of the screen. To monitor and control what uses the battery 1 From the Home screen, tap the Menu Key
and tap Settings > About phone > Battery use. 2 The top of the screen displays battery usage time. Either how long since last connected to a power source, or if connected to a power source, how long you were last running on battery power. The screen also lists applications or services using battery power from greatest amount to least.
Installing an open source operating system on your phone and not using the operating system provided by the manufacturer can cause your phone to malfunction.
, tap Settings > Location & security > Set up screen lock and select among Pattern, PIN or Password.

5. Using Hard Reset (Factory Reset) If your phone needs to be restored to its original condition, use a Hard Reset to initialize your phone. 1 Turn the power off. 2 Press and hold the following keys at the same time for 8 seconds: Power/Lock Key + Down Volume Key. 3 When FACTORY HARD RESET screen is displayed, release the keys. 4 Press the Power/Lock Key to confirm -- delete all user data, and press the Volume Keys to cancel.
Take precautions when using an Unlock Pattern, PIN, or Password. It is very important that you remember the screen unlock information you set. You are allowed 5 attempts to enter your screen unlock information. If you used up all 5 opportunities, you will have to wait 30 seconds to attempt unlocking the phone again.
When you can’t recall your Unlock Pattern, PIN, or Password:
If you logged into a Google account on the phone and failed to use the correct pattern 5 times, tap Forgot Pattern? You will be required to sign in with your Google account and prompted to create a new unlock pattern. If you haven’t created a Google account on the phone or you forgot your PIN or Password, you need to perform a hard reset.
If you perform a Hard Reset, all user applications and user data will be deleted. Please remember to back up any important data before performing a Hard Reset.

7. Connecting your phone to a computer via USB 1 Use the USB cable that was provided with your phone to connect the phone to a USB port on your computer. You'll receive a notification that the USB is connected and can see USB connection mode popup. 2 Tap Mass storage and OK to confirm that you want to transfer files between your phone’s micro SD card and the computer. When the phone is connected as USB storage, you receive a notification. Your phone’s micro SD card is installed as a drive on your computer. You can now copy files to and from the micro SD card.
Do not remove the micro SD card without unmounting it fi rst. Otherwise, it may damage the micro SD card as well as your phone, and the data stored on the micro SD card may be corrupted. To remove the micro SD card safely, from the Home screen, tap the Menu Key
and tap Settings > SD card & phone storage > Unmount SD card.
You cannot access the micro SD card from your phone while connected as USB storage. So you cannot use applications that rely on the micro SD card, such as Music.

Or you can download the program from the preinstalled microSD card. 1 Connect the USB data cable to your PC. Make sure that Mass storage mode is enabled on your phone. 2 Copy the LGPCSuiteIV folder from mass storage to your PC. 3 Run the LGInstaller.exe file on your PC and follow the instructions. 4 When LG PC Suite IV installation is complete, disable Mass storage mode to run LG PC Suite IV. NOTE: Do not remove or delete other program files installed on your memory card. This may damage your preinstalled applications. NOTE: LG integrated USB driver is required to connect an LG device and PC and installed automatically when you install “LG PC Suite” PC software.
Installing “LG PC Suite” PC application “LG PC Suite” PC application can be downloaded from the webpage of LG. 1 Go to www.lg.com and select a country of your choice. 2 Go to Support > Mobile Phone Support > Select the Model (LG-P936) 3 Click PC Sync from Download, and click WINDOW PC Sync Download to download “LG PC Suite” PC software.

Your screen will go dark if untouched for a period of time when using a data connection. To turn on your LCD screen, press the Power/Lock Key.
Please hold the mobile phone straight up as a regular phone. While making/receiving calls or sending/ receiving data, try to avoid holding the lower part of the phone where the antenna is located. It may affect call quality.
If the phone does not respond to user input or the screen freezes: Press and hold the Power/Lock Key for 12 seconds to turn it off. Then, press and hold the Power/Lock Key again for 3 seconds to reboot the phone.

To turn on the phone, press and hold the Power/Lock Key for 3 seconds. To turn off the phone, press the Power/Lock Key for 3 seconds and tap Power off and OK to confirm.

- Powers your phone on/off
by pressing and holding the key. - Turns your screen on and
Front-Facing Camera Lens - Used to take a self-shot.
off and locks it.
Quick Keys - Phone Key
Proximity Sensors - Senses proximity toward
other objects, such as your head during a call, so that you do not accidentally activate unwanted features.
for the current screen. - Touch and hold to activate the search
function. Home Key
- Returns to the previous screen. - Closes pop-up menus and
- Returns to the Home screen from any screen.
dialog boxes.
Placing a heavy object on the phone or sitting on it can damage its LCD and touch screen functionalities. Do not cover the LCD’s proximity sensor with a protective fi lm. This can cause the sensor to malfunction.


whenever you open an application to check what options are available. - If your phone has errors when you use it or you cannot turn it on, remove the battery,
install it again and turn it on after 5 seconds.
Volume Keys - Allows you to adjust the ringer
and media volumes, or to adjust the in-call volume during a call. - Press and hold the volume down
Camera Lens Flash micro SD Card Slot - Accommodates the pre-
installed 16GB micro SD™ card (expandable up to 32GB).

Installing the SIM card and battery Before you can start exploring your new phone, you’ll need to set it up. To insert the SIM card and battery: 1 Hold the phone on your hand firmly. With the other hand, lift the back cover using the fingertip cutout located on the bottom of the cover and remove it.
3 Insert the battery into place by aligning the gold contacts on the phone and the battery.


4 Replace the back cover of the phone (as demonstrated below). Apply a steady downward pressure until the battery cover clicks into place.

2 Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards.

Charging your phone 1 Connect the cabless wall adapter and USB cable. 2 Plug the USB cable (as shown below) into the phone's charger/accessory port. Make sure the USB symbol is facing upwards.
Your phone has an internal antenna. Be careful not to scratch or damage this rear area, as that will cause loss of performance. If the phone is turned off as the battery is fully discharged, the battery is called a weak battery. In this case when the phone connect to the charger(TA or USB) cable, the keypad LED at the bottom of the phone will be blinking. This is normal operation in the weak battery to prevent over-current fl owing because the phone is designed to provide reasonable protection algorithm for against damage of battery. And after a few minutes, the LCD is turned on normally.
The battery must be fully charged initially to improve battery lifetime.
Inserting a micro SD card Insert a micro SD™ card to use the camera and other multimedia features. Multimedia contents can be saved in the micro SD card. LG-P936 has a micro SD card pre-installed.

2 Then insert the micro SD card into the slot. Make sure the gold contact area is facing downwards.
This device supports up to a 32GB micro SD card.

1 Turn the phone off before inserting or removing the micro SD card. Remove the back cover.
Removing the micro SD card To safely remove the micro SD card from your phone, first you need to unmount it.

Formatting the microSD card Your microSD card may already be formatted. If it isn’t, you must format it before you can use it.
On Android OS 2.3 and above, you can download applications from Play Shop and store them on a micro SD card as well as on the phone. Due to this feature, if you skip the unmount procedure, it can cause an error because information between the micro SD card and the phone is not accorded properly. In the worst case, the micro SD card can be corrupted or damaged.
All fi les on the card are deleted when you format the micro SD card.
1 From the Home screen, tap the Menu Key
and tap Settings > SD card & phone storage > Unmount SD card. 2 Tap Erase SD card and Erase SD card button. 3 If you set an unlock pattern, enter it and tap Erase everything. The card will then be formatted and ready to use.
1 From the Home screen, tap the Menu Key
and tap Settings > SD card & phone storage > Unmount SD card. 2 Remove the battery cover and gently pull the microSD card from the slot.
If there is content on your micro SD card, the folder structure may be different after formatting since all the fi les will have been deleted.
Do not remove the micro SD card without unmounting it fi rst. Otherwise, it may damage the micro SD card as well as your phone, and the data stored on the micro SD card may be corrupted.

Switching between and exiting applications Multi-tasking is easy with Android because open applications keep running even when you open another application. There is no need to quit an application before opening another. Use and switch among several open applications. Android manages each application, stopping and starting them as needed, to ensure that idle applications don’t consume resources unnecessarily.
MHL MHL(Mobile High-Definition Link) is a mobile audio/video interface standard for connecting mobile phones and other portable consumer electronics devices to high-definition televisions and displays. The MHL standard features a single cable with a 5-pin interface able to support up to 1080p HD video and digital audio. you can see the image and video file through the TV/monitor when the video player or image viewer is visible on your phone screen.
- Touch and hold the Home Key
. A list of recently used applications will be displayed. Then tap the application you want to access. To stop/exit an application 1 From the Home screen, tap the Menu Key
When your device is connected to an MHL-enabled HDTV, the cable will simultaneously charge the device and output media. If connected to an HDTV without MHL, the cable will not charge the connected device unless an MHL- HDMI adapter is used.
and tap Settings > Applications > Manage applications. 2 Tap the desired application and tap Force stop to exit.
Switching between applications

Touch screen tips With the touch of your finger, you can access available applications, make menu selections, and access data saved to your phone. The following terms are used for describing the different available actions using the touchscreen: Tap - A single finger tap selects items, links, shortcuts and letters on the on-screen keyboard. Touch and hold - Touch and hold an item on the screen by touching it and not lifting your finger until an action occurs. For example, to open a contact's available options, touch and hold the contact in the Contacts list until the context menu opens. Drag - Touch and hold an item for a moment and then, without lifting your finger, move your finger on the screen until you reach the target position. You can drag items on the Home screen to reposition them. Swipe or slide - To swipe or slide, quickly move your finger across the surface of the screen, without pausing when you first touch it (so you don’t drag an item instead). For example, you can slide the screen up or down to scroll through a list, or browse
through the different Home screens by swiping from left to right (and vice versa). Double-tap - Double-tap to zoom on a Web page or a map. For example, quickly double-tap a section of a Web page to adjust that section to fit the width of the screen. You can also double-tap to zoom in and out when taking a picture (using the Camera), and when using Maps. Pinch-to-Zoom - Use your index finger and thumb in a pinch or spread motion to zoom in or out when using the browser, Maps, or browsing pictures. Rotate the screen - From many applications and menus, the orientation of the screen adjusts to the device's physical orientation.

Proximity sensors When receiving and making calls, this sensor automatically turns the backlight off and locks the touch keypad by sensing when the phone is near your ear. This extends battery life and prevents the touch keypad from activating unintentionally during calls.
Lock your phone When you are not using the LG-P936 press the Power/Lock Key
to lock your phone. This helps prevent accidental presses and saves battery power. Also, if you do not use the phone for a while, the Home screen or other screen you are viewing, is automatically replaced with the lock screen after 30 seconds of inactivity to conserve the battery and prevent pocket dialing. To wake up your phone, press the Power/ Lock Key
Setting an unlock pattern: You can draw your own unlock pattern by connecting four or more dots. To unlock the phone, draw the pattern you set on the screen.
If there are more than 5 pattern drawing errors in a row, you will be required to wait for 30 seconds to retry.
. The lock screen will appear. Slide the lock screen up. The last screen you were working on opens.

Quick Switch to Silent Mode To quickly set your phone to silent mode, press and hold the Volume Down Key until you see
Customizing your Home screen You can customize your Home screen by adding quick access elements, such as shortcuts, widgets, folders to it, or changing the wallpaper. • Widgets: Add dynamically updating
on the Status Bar.
Home Simply swipe your finger to the left or right to view the different panels. You can also customize each panel with shortcuts, and folders. You can also customize each panel with widgets, which are shortcuts to your Favourite applications.
On the Home screen, you can view quick keys at the bottom of the screen. The quick keys provide easy, one-tap access to the functions you use the most.
> Add. Or, touch and hold an empty part of the Home screen. 3 Tap the type of item you want to add on the screen: Widgets, Shortcuts, Folders,

or Wallpapers. 4 Tap an available widget, shortcut, or folder. 5 You will see a new icon on the Home screen. To place it on a different panel, drag it to the desired location on the desired panel and release your finger from the screen.
To delete an application icon from the Home screen, touch and hold the shortcut icon you want to delete and drag to
at the bottom of the screen. You cannot delete the preloaded applications. (Only their icons can be deleted from the screen).
Getting back to a recently used application 1 Touch and hold the Home Key
To add a preloaded application or an application you have downloaded from Play Shop to the Home screen, simply touch and hold the icon you want in the Applications Screen to add to the Home screen.
. The screen will display the icons of applications that you have used recently. 2 Tap an icon to open its application or tap the Back Key
to return to the current application.
If there is no available space on a particular Home screen panel, Add will not be available; you must delete or remove an item before you can add another item. In this case, you have the option of switching to another Home screen panel.

Notifications panel Notification icons on the Status Bar report the arrival of new messages, calendar events, alarms, as well as ongoing events, such as when you are in a call. You can view a list of all recent notifications. The Notifications panel runs across the top of your screen.
Viewing the Status bar The Status bar uses different icons to display phone information, such as signal strength, new messages, battery life, and active Bluetooth and data connections. Below is a table explaining the meaning of icons you are likely to see in the Status bar.
No SIM card inserted
No network signal available
Airplane mode is on
Connected to a Wi-Fi network
Data Mode GPS Bluetooth Wi-Fi Vibrate Mode
Touch and hold the Status Bar and slide it down with your finger. Or, from the Home screen, tap the Menu Key
> Notifications. From here, you can check and quickly turn on and off Silent (Vibrate) mode, Wi-Fi, Bluetooth, GPS, and Data Mode.
Phone microphone is muted

3 more notifications not displayed
Connected to a Bluetooth device
New Google Mail available
New Google Talk message available
Vibrate mode is on
New text/multimedia message available
Phone is connected to PC via USB cable
USB tethering is active.
Portable Wi-Fi hotspot is active
USB tethering & Portable Wi-Fi hotspot are active.
Receiving location data from GPS
Data in and out

On-screen Keyboard You can enter text using the on-screen keyboard. The on-screen keyboard displays automatically on the screen when you need to enter text. To manually display the keyboard, simply tap a text field where you want to enter text.
Hide Keyboard Key - Tap to hide the keyboard. Enter Key - Tap to move the cursor to the next line.
LG keyboard - QWERTY - Numbers and Symbols Entry
LG keyboard - QWERTY - Letters Entry
Alt Key - Tap to enter additional symbols. The keyboard will change to alternate characters. Letters/ Settings Key - Tap to change input to letters entry. Touch and hold to set various LG keyboard settings. Space Key - Tap to enter space. Delete Key - Tap to delete characters to the left of the cursor. Hide Keyboard Key - Tap to hide the
Shift Key - Tap once to capitalize the next letter you type. Double-tap for all caps. Number and Symbols/ Settings Key - Tap to change input to number and symbol entry. Touch and hold to set various LG keyboard settings. Delete Key - Tap to delete characters to the left of the cursor.

keyboard. Next Key - Tap to move the cursor to the next field.
Space Key - Tap to enter space. Delete Key - Tap to delete characters to the left of the cursor. Number and Symbols/ Settings Key - Tap to change input to number and symbol entry. Touch and hold to set various LG keyboard settings. Enter Key - Tap to move the cursor to the next line. Hide Keypad Key - Tap to hide the keypad. T9 Key - Tap to turn on the T9 entry mode.
LG keyboard – Phone keypad To switch to the phone keypad on LG keyboard, touch and hold
. Tap LG keyboard settings > Keyboard layout, then tap Phone keypad. The Phone keypad allows you to enter letters by tapping the key labeled with the desired letters, similar to how you would on a traditional 12 key phone. You may have to tap a key up to four times to type the desired letter or number.
Shift Key - Tap once to capitalize the
next letter you type. Double-tap for all caps.The coloured circle on the button tells you if uppercase is locked on
or if it is just on for one character
Number and Symbols/ Settings Key
- Tap to change to 123 Mode and enter numbers and symbols. Touch and hold to set various LG keyboard settings.
Shift Key - Tap once to capitalize the next letter you type. Double-tap for all caps.

Enter Key- Adds another line when
From Qwerty keyboard To input the accent, press and hold the “a” key. After the accented character appears, tap it to enter it.
entering text.
Hide Keypad Key - Removes the
keypad from the screen.
Delete Key- Deletes any text you
have entered. To enter a space, tap
123 Mode This mode allows you to enter numbers in a text message (a telephone number, for example) more quickly. Tap the keys corresponding to the required digits before manually switching back to the appropriate text entry mode by tapping the
key.
Entering accented letters When you select French as the text entry language, you can enter special French characters (e.g., “á”).
From Phone Keypad After the corresponding letter character disappears, press the same key repeatedly until you see the special character you want.

The first time you open a Google application on your phone, you will be required to sign in with your existing Google account. If you do not have a Google account, you will be prompted to create one.
Signing into your Google account 1 Enter your email address and password, then tap Sign in. 2 After signing in, you can use Google Mail™ and take advantages of Google services on your phone. 3 Once you have set up your Google account, your phone will be automatically synchronized with your Google account on the web. (Depending on your synchronization settings.) After signing in, your phone will sync with your Google services, such as Google MailTM, Contacts, Google Calendar, and Picasa photo albums. You can also use Google MapsTM, download applications from Play Shop™, back up your settings to Google servers, and take advantage of other Google services on your phone.
1 From the Home screen, tap the Applications Key
. 2 Tap Google Mail > Next > Create to start the Google Mail™ setup wizard. 3 Tap a text field to open the keyboard and enter your name and username for your Google account. When you finish entering the text, you can move to the next text field by tapping Next on the keyboard. 4 When you’re finished entering your name and username, tap Next. Your phone will communicate with Google servers and check for username availability. 5 Enter and re-enter your password. Then follow the instructions and enter the required and optional information about the account. Wait while the server creates your account.


Wi-Fi To use Wi-Fi on your phone, you need access to a wireless access point, or "hotspot." Some access points are open and you can simply connect to them. Others are hidden or implement other security features, so you must configure your phone in order to connect to them.
3 Tap a network to connect to it. - If the network is open, you are prompted
to confirm that you want to connect to that network by tapping Connect. - If the network is secured, you are
prompted to enter a password or other credentials. (Ask your network administrator for details). 4 The Status Bar at the top of your screen will display an icon that indicates your Wi-Fi status.
Turn on Wi-Fi From the Home Screen, open the Notifications panel and tap
to turn Wi-Fi on. OR Tap the Menu Key
and tap Settings > Wireless & networks > Wi-Fi
If you are not in range of a Wi-Fi network and use a network connection. Additional data charges may apply.
To connect to a Wi-Fi Network Turn off Wi-Fi when you're not using it to extend the life of your battery. 1 From the Home screen, tap the Menu Key
and tap Settings > Wireless & networks > Wi-Fi settings. 2 Tap Wi-Fi to turn it on and begin scanning for available Wi-Fi networks. - A list of available Wi-Fi networks will
be displayed. Secured networks are indicated by a lock icon.

This device supports WEP, WPA/ WPA2- PSK, WPA PSK, WPA2 Only PSK and 802.1x EAP. (Some EAP methods are not supported.) If your Wi-Fi service provider or network administrator sets encryption for network security, enter the key in the pop-up window. If encryption is not set, this pop-up window will not be shown. You can obtain the key from your Wi-Fi service provider or network administrator.
Please consult documentation included with Bluetooth device for information on pairing mode and passcode (typically 0 – four zeroes).
How to send data from your phone via Bluetooth You can send data via Bluetooth by running a corresponding application, not from Bluetooth menu, unlike regular mobile phones. * Sending pictures: Open the Gallery application and tap a picture. Then tap Menu > Share > Bluetooth. Check if Bluetooth is turned on and tap Scan for devices. Then tap the device you want to send data to from the list. * Exporting contacts: Open the Contacts application. Tap the contact you want to share, tap the Menu Key
Bluetooth Using Bluetooth 1 From the Wireless & networks screen, tap Bluetooth to turn on the Bluetooth setting. 2 Tap Bluetooth settings > Scan for devices. 3 Tap the name of the device you wish to pair with, and then tap Pair to pair and connect.
and tap Share > Bluetooth. Check if Bluetooth is turned on and tap Scan for devices. Then tap the device you want to send data to from the list.

The supported Bluetooth version is Bluetooth 3.0 and certified by Bluetooth SIG. It is compatible with other Bluetooth SIG certified devices. - If you want to search for this phone
and tap Share . Tap the contacts you want to send or tap Select all. Then tap Share > Bluetooth. Check if Bluetooth is turned on and tap Scan for devices. Then tap the device you want to send data to from the list. * Connecting to FTP (Only the FTP server is supported on this handset): From the Home screen, tap the Menu Key
from other devices, from the Home screen, tap the Menu Key
and tap Settings > Wireless & networks > Bluetooth settings. Make sure Bluetooth is turned on. Tap Discoverable to place a checkmark and make the phone visible to other Bluetooth devices for 120 seconds. - Supported profiles are HFP/HSP,
and tap Settings > Wireless & networks > Bluetooth settings. Make sure Bluetooth is turned on. Tap Discoverable to place a checkmark and make the phone visible to other Bluetooth devices. Then search for other devices. Find the service you want and connect to the FTP server.
A2DP, AVRCP, OPP, FTP(Server) and PBAP.
You can use your phone to provide a data connection to a computer by activating data tethering and connecting them with a USB cable. To tether your phone with your computer using the USB

1 Connect your phone to your computer with a USB cable. 2 You can see USB connection mode popup and tap USB tethering and OK to confirm then tap USB tethering. 3 A blue check mark will appear, indicating that the function is activated.
Mobile Hotspots You can also use your smartphone to provide a mobile broadband connection for up to 8 other devices. Create a hotspot and share your connection. To create a portable hotspot, tap the Menu Key
> Settings > Wireless & networks > Tethering & portable hotspot > Portable Wi-Fi hotspot. Set a password upon first use.
- Data Tethering requires an
appropriate DataPro data plan. Devices connected by tethering use data from your DataPro plan. Plans are not unlimited and significant charges may be incurred if the included data allowance is exceeded. Performance may vary depending on the number of devices connected and other factors. - You cannot access your phone's
Mobile Hotspots requires an appropriate DataPro data plan. Devices connected to your Mobile Hotspot use data from your DataPro plan. Plans are not unlimited and signifi cant charges may be incurred if the included data allowance is exceeded. Performance may vary depending on the number of devices connected and other factors. If you do not use a password, others will be able to use your Mobile Hotspot connection.
micro SD card on your computer when using USB tethering. - From the Home screen, tap the
and tap Settings > Wireless & networks > Tethering & portable hotspot > USB tethering.
Menu Key

Wi-Fi Direct Learn to use the WLAN Direct feature to connect two devices via a WLAN without requiring an access point.
2 Add files you want to share. 3 On the top of the screen, you can see all devices connected with your phone. Select devices you want to share with and then touch the
. When the other device accepts the request, it starts sending. Use menu key to use more of its functions.
Connect your device to another WLAN device 1 Settings > Wireless & network settings > Wi-Fi Direct settings > Wi-Fi Direct 2 Press Menu > Scan. 3 Select a device and then select Connect. When the owner of the other device accepts the connection, pairing is complete. 4 To deactivate the WLAN Direct feature, select Disconnect Wi-Fi Direct.
Receive data When prompted, select OK to confirm that you are willing to receive data.
Smartshare SmartShare uses DLNA (Digital Living Network Alliance) technology to share digital content through a wireless network. Both devices must be DLNA certified to support this feature.
Wi-Fi Share You can share your music, picture and video content between users connected via the same Wi-Fi, Wi-Fi Directed or potable hotspot network. Check your network settings in advance and make sure the users are connected to the same network.
To turn SmartShare on and allow sharing contents 1 Tap the Applications Key
> SmartShare. 2 Tap the Menu Key
> Settings. 3 Tap Discoverable checkbox to turn on. - Tap Always accept request to
Send data 1 Applications Key
automatically accept sharing requests from other devices.
> Wi-Fi Share

- Tap Receive files to allow automatically
5 Tap a content thumbnail or tap the Menu Key
allow upload files to my phone from other devices. 4 Under the Sharing contents section, tap each type of content you would like to share. Choose from Pictures, Videos, and Music. 5 SmartShare is now activated and ready to share contents.
and tap Play button.
To share contents from your phone to your renderer device(e.g. TV)
Make sure that your renderer device is properly confi gured.
To share contents from remote content library to other devices Let your renderer device (e.g. TV) play multimedia contents from your remote content library (e.g. PC)
1 While browsing your pictures or videos using the Gallery application, touch and hold to select files. Then you will be able to select multiple files to be shared. 2 Tap Share > SmartShare. SmartShare is automatically launched with the selected files. 3 Select the device from renderer lists to play the files.
Make sure that the DLNA functionality of your devices is properly confi gured (e.g. TV and PC)
1 Tap the Applications Key
> SmartShare. 2 Tap the top right button to or select the device from renderer lists. 3 Tap the top left button and select the device of the remote content library. 4 You can browse the content library.
Follow the similar steps to use the Music player, Camera and Video player to share contents.

To upload contents from my phone to remote content library
Check that your device is connected with your home network using Wi-Fi connection to use this application. Some DLNA enabled devices (e.g. TV) support only the DMP feature of DLNA and will not appear in the renderer device list. Your device might not be able to play some contents.
Make sure that SD card is correctly mounted and the Receive fi les in settings menu is checked.
1 Tap the Applications Key
> SmartShare. 2 Tap the top left button and select My phone. 3 You can browse the content library. 4 Touch and hold a content thumbnail and then tap the upload menu key. 5 Select a device of remote content library to be uploaded.
To download contents from remote content library 1 Tap the Applications Key
> SmartShare. 2 Tap the top left button and select the device of the remote content library. 3 You can browse the content library. 4 Tap a content thumbnail then tap download menu key.
Some DLNA enabled devices do not support DMS upload functionality and will not be uploaded. A few types of contents are not supported.
A few types of contents are not supported.

Answering and rejecting a call
to open the keypad. 2 Enter the number on the keypad. To delete a digit, tap the Clear icon
When the screen is locked When your phone rings, drag the Answer icon
. 3 Tap the Call icon
to the right. Drag the Decline icon
to make a call. 4 To end a call, tap the End icon
to the left to reject an incoming call. Drag the Excuse Msg bar upwards if you want to send a message to the caller. If the caller is unknown, this Excuse Msg bar is not available.
To enter “+” to make international calls, touch and hold
When the screen is unlocked When your phone rings, tap the Answer icon
to reject an incoming call. Tap the Excuse Msg bar upwards if you want to send a message to the caller. If the caller is unknown, the Excuse Msg bar is not available.
. Tap Decline icon
to open your contacts. 2 Scroll through the contact list or tap the Search box and enter the first letter(s) of the contact you want to call. 3 In the list that is displayed, tap the contact you want to call. 4 In the Contact Info screen, tap the phone number you wish to call.
Adjusting the in-call volume To adjust the in-call volume during a call, use the volume up and down keys on the left side of the phone.

Making a second call 1 During your initial call, tap the Menu Key
. Or, tap the Dialpad icon
and the Call log tab. View a complete list of all dialed, received, and missed voice calls.
. Then enter the number you want to call. 2 Dial the number or search your contacts. 3 Tap the Call icon
to connect the call. 4 Both calls will be displayed on the call screen. Your initial call will be locked and put on hold. 5 Tap the Contact on the screen to toggle between calls or tap
Tap any single call log entry to view the date, time, and duration of the call.
to merge the calls. 6 To end active calls, tap End. If there is no active call, it will end the call on Hold.
Tap the Menu Key
, then tap Delete all to delete all the recorded items.
Call settings You can configure phone call settings, such as call forwarding, and other special features offered by your carrier. 1 From the Home screen, tap the Menu Key
You will be charged for each call you make.
and tap Settings. 2 Tap Call settings.
and select

You can add contacts on your phone and synchronize them with the contacts in your Google Account or other accounts that support syncing contacts.
Favourite Contacts You can classify frequently called contacts as favourites. To add a contact to your favourites 1 From the Home screen, tap the Applications Key
Searching for a contact 1 From the Home screen, tap the Applications Key
to open your contacts. 2 Tap a contact to view its details. 3 Tap the star to the right of the contact’s name. The star turns gold and the contact is added to your favourites. To remove a contact from your favourites list 1 From the Home screen, tap the Applications Key
to open your contacts. 2 Tap the Search field and enter the contact name using the keypad.
and enter the new contact’s number. Tap the Menu Key
, tap Add to contacts and then Create new contact. 2 If you want to add a picture to the new contact, tap
to open your contacts. 2 Tap the Groups tab and tap favourites. 3 Tap a contact to view its details. 4 Tap the gold star to the right of the contact’s name. The star turns grey and the contact is removed from your favourites.
. Choose from Capture picture or Pick from Gallery. 3 Select the contact type by tapping
. 4 Tap a category of contact information and enter the details about your contact. 5 Tap Save to save the contact entry.
and then tap · and then tap · and then tap

Messaging Your phone combines SMS and MMS into one intuitive, easy-to-use menu.
4 Tap the Menu Key
to open the options menu. Choose from Templates, Attach, Discard, Add subject, Insert smiley, and More (All messages, Keyboard settings). 5 Tap Send to send your message. 6 The message screen opens, with your message after recipient name/number. Responses appear on the screen. As you view and send additional messages, a message thread is created.
Threaded box Messages (SMS and MMS) exchanged with another party can be displayed in chronological order so that you can conveniently see an overview of your conversation.
Sending a message 1 Tap the
icon on the Home screen, then tap New message to create a new message. 2 Enter a contact name or phone number in the To field. As you enter the contact name, matching contacts appear. You can tap a suggested recipient. You can also add multiple contacts.
The 160-character limit may vary from country to country depending on how the SMS is coded and the language used in the message.
If an image, video, or audio fi le is added to an SMS message, it will be automatically converted into an MMS message and you will be charged accordingly.
You will be charged for a text message for every person you send the message to.
3 Tap the text field to start entering your message.

The first time you open the Email application, a setup wizard opens to help you add an Email account.
Microsoft Exchange Email Account Email address – Enter the account email address. User name – Enter the account username. Password – Enter the account password. Domain – Enter the account domain (optional) Server address – Enter the server address Use SSL – Choose whether or not to use SSL for Microsoft Exchange.
Using smilies Liven up your messages using smilies. When writing a new message, tap the Menu Key
, then tap Insert smiley.
Changing your message settings Your phone's message settings are predefined, so you can send messages immediately. You can change the settings based on your preferences.
Other (POP3, IMAP) Email Account Email address – Enter the account email address. Password – Enter the account password. Setup complete page will appear and you will need to enter “name”. The account will now appear in the list of accounts in your Email folder. POP3 / IMAP4 – Select protocol type, either POP3 or IMAP4. Incoming server – Enter the incoming email server address. Secure type – TLS/SSL/Off.
X From the Home screen, tap Messaging
> Settings.
Email You can use the Email application to read Email from providers other than Google Mail. The Email application supports the following account types: POP3, IMAP and Microsoft Exchange ActiveSync (for Enterprise users).
To open the Email application
X From the Home screen, tap the
> Email.
> Menu Key · Applications Key

Port number – Normally each account’s default number will be displayed. Outgoing server – Enter the outgoing email server address. SMTP Secure Connection – TLS/SSL/Off. Port number – Normally each account’s default number will be displayed. Tap the Next button to connect the server. Setup Completed page will appear. You will need to enter “name” for account display and My name. Then, tap Done. The account will now appear in the list of accounts in your Email folder.
You can tap an account to view its Inbox. The default account from which you send email is indicated with a checkmark.
To open your Combined Inbox If you have configured email to send and receive email from more than one account, you can view all messages sent to all accounts in your Combined Inbox.
X Tap Email > Combined Inbox (on the
Accounts screen). Messages in the Combined Inbox are colour coded on the left, by account, using the same colours used for your accounts in the Accounts screen. When a new email arrives in the inbox, there will be sound and vibration notification. Tap the email notification to end it.
The Accounts Screen The Accounts screen lists your Combined Inbox and each of your email accounts.
X Tap the Applications Key
> Email. The Account list appears.
Composing and Sending Email 1 In the Email application, tap the Compose. 2 Enter an address for the message’s intended recipient. As you enter text, matching addresses will be offered from your contacts. 3 Tap the Cc/Bcc field to copy or blind copy to other contacts/email addresses. 4 Enter the text of the message.
To make a shortcut to the Inbox of an account:
In the accounts list, touch and hold an email account. Then, tap Add to homescreen.

5 Tap Attach to attach the file you want to send with your message. 6 Tap Send. If you are not ready to send the message, tap Save to save it in a Drafts folder. Touch a message in the Drafts folder to resume working on it. Your message will also be saved as a draft if you touch the Back key before sending it. Tap Cancel to abandon and delete a message, including any saved drafts. If you are not connected to a network, for example if you’re working in airplane mode, the messages you send are stored in your Outbox folder until you’re connected to a network. If it contains any pending messages, the Outbox will be displayed on the Accounts screen.
Working with Account Folders Each account has Inbox, Outbox, Sent, Drafts, Trash and Junk folders. Depending on the features your account service provider supports, you may have additional folders.
Adding and Editing Email Accounts
To add an email account 1 Tap the Applications Key
> Email. 2 Select MS Exchange or Other. If an email account is already set up, the wizard is not activated automatically. In this case, tap the Menu Key
> Add account.
To change account settings 1 Open the Accounts screen. 2 Tap the Menu Key
> Settings.
To delete an email account 1 Open the Accounts screen. 2 Touch and hold the account you want to delete. 3 Tap Remove account in the menu that opens and tap Remove in the dialogue box to confirm.
The messages sent using an Exchange account will not be stored on the phone; they will be stored on the Exchange server itself. If you want to see your sent messages in the Sent folder (or with the Sent label), you may need to open the Sent folder/label and select Refresh from the options menu.

With your phone, you can enjoy social networking and manage your micro-blog in on-line communities. You can update your current status, upload photos, and view your friends’ status updates in real-time. You can add your Facebook, Twitter, and MySpace accounts to your phone. If you don’t have an account, you can visit their sites to set one up.
If you add a social networking widget on your Home screen, the widget will show your status when your phone receives updates from the network. You can also access the social community directly by tapping the widget. 1 Touch and hold an empty spot on the Home screen. NOTE : If there is no available space on a particular Home screen panel, you won't be able to add any widget; you must delete or remove an item before you can add another item. In this case, you have the option of switching to another Home screen panel. 2 When various Widgets appear, scroll through the widget and tap Social+
Additional costs may be incurred when connecting and using online services. Check your data charges with your network provider.
Adding an account to your phone 1 From the Home screen, tap the Menu Key
> Settings > Accounts & sync. 2 Tap Add account. 3 Tap any social networking service you want to use. 4 Enter your email address and password that you set up for your social networking account, then tap Log in.

Viewing and updating your status 1 Go to the Home screen panel where the Social+ widget is. You can see the current status of social applications you set. 2 You can select each social application you'd like to view. Tap the
Syncing accounts on your phone You can sync information from your social networking accounts with your Contacts and other functions on your phone, if applicable. 1 From the Home screen, tap the Menu Key
. 3 Tap "What are you doing?" fi eld to update your status with comments or upload pictures. - Check all the social applications you'd
> Settings > Accounts & sync. Choose the account you want to synchronize and enter the necessary information. 2 Check Background data and Auto-sync. 3 Tap the account to sync. 4 Check sync options such as Sync Contacts. "
like to update. It'll will simultaneously update all. 4 After entering comments with attachment (if any), tap Post.
" indicates that synchronization has been enabled.
You can use information about friends only in your social network(s) or sync all data to Contacts.
Removing accounts on your phone 1 From the Home screen, tap the Menu Key
> Settings > Accounts & sync. 2 Tap the account(s) you want to delete, then tap Remove account (twice).

To open the Camera application, tap Applications Key
Brightness – This defines and controls of the amount of sunlight entering the lens. Slide the brightness indicator along the bar, towards “-” for a lower brightness image, or towards “+” for a higher brightness image.
Zoom – Zoom in or zoom out. Alternatively you can use the Volume Keys.
Camera Switch - Allows you to switch between the front-facing and back-facing cameras.

Video mode – Slide this icon down to
switch to video mode.
Taking a photo – Allows you to take a
photo.
Gallery – This enables you to access
your saved photos and videos within the camera mode. Simply tap and your Gallery will appear on the screen.
Settings – Tap this icon to open the settings menu. See Using the advanced
settings on page 53 .
Flash – Allows you turn on the flash when taking a photo in a dark place.
> Camera

Taking a photo 1 From the Home screen, tap Camera.
Additional charges may apply when MMS messages are sent while roaming.
2 Holding the phone horizontally, point the lens towards the subject you want to photograph. 3 Touch and hold the capture button lightly, and a focus box will appear in the center of the viewfinder screen. 4 Position the phone so you can see the subject in the focus box. 5 When the focus box turns green, the camera has focused on your subject. 6 Release the Capture button.
Set as Tap to use the image as Contact
icon or Wallpaper.
Rename Tap to edit the name of the
selected picture.
Tap to delete the image.
Tap to take another photo immediately.
Your current photo will be saved.
Tap to view the Gallery of your saved
photos.
A shading issue may occur when you take a picture indoors, due to the characteristics of the camera. (Shading means a colour difference between the center and sides.)
to open the advanced options. You can change the camera settings by scrolling the list. After selecting the option, tap the Back key
Once you’ve taken the photo Your captured photo will appear on the screen if Auto review is set to On.
Share Tap to share the picture via
various methods such as Bluetooth or Messaging.

Colour effect – Choose a colour tone for your new photo. Timer – The self-timer allows you to set a delay after the shutter is pressed. Select Off, 3 sec, 5 sec, or 10 sec. This is ideal if you want to be included in a photo. Shot mode – Choose from Normal, Continuous shot, and Panorama. Shutter sound – Select one of the four shutter sounds. Auto review – If you set Auto review on, it will display the picture that was just taken automatically. Tag location – Activate to use your phone’s location-based services. Take pictures wherever you are and tag them with the location. If you upload tagged pictures to a blog that supports geotagging, you can see the pictures displayed on a map.

Viewing your saved photos You can access your saved photos from within the camera mode. Just tap the Gallery button
This function uses wireless networks. You need to checkmark Use wireless networks. From the Home screen, tap the Menu Key
and your Gallery will be displayed.
> Settings > Location & security > Use wireless networks.
Flick left or right to view other photos or videos.
– Restore all camera default settings.
– Tap whenever you want to know how
a function operates. This will provide you a quick guide.
SlideShow – Tap to see slide show.
Menu – Tap to access the following
options: Share to share the picture via various methods such as Bluetooth or Messaging. Delete - to delete the picture. More - to access options such as Details, Set as, Crop, Rotate left, Rotate right.
Setting a photo as wallpaper 1 Tap the photo you want to set as wallpaper to open it. 2 Tap the screen to open the options menu. 3 Tap Menu > More > Set as > Wallpaper. 4 Crop the image as desired and tap Save.

Brightness – This defines and controls of the amount of sunlight entering the lens.
Slide the brightness indicator along the bar, towards “-” for a lower brightness video, or towards “+” for a higher brightness video.
Zoom – Zoom in or zoom out. Alternatively you can use the Volume Keys.
Camera Switch - Allows you to switch between the front-facing and back-facing
cameras.

Camera mode – Slide this icon up to switch
to camera mode.
Start recording – Allows you to start
recording.
Gallery – This enables you to access your
saved photos and videos from within the video camera mode. Simply tap and your Gallery will appear on the screen.
Settings – Tap this icon to open the settings menu. See Using the advanced
settings on page 57 .
Flash – Allows you turn on the flash when recording video in a dark place.

Recording a video 1 From the Home screen, tap Camera and slide the camera mode button to change to Video mode. The icon will change to
Additional charges may apply when MMS messages are downloaded while roaming.
. 2 The video camera’s viewfinder will appear on the screen. 3 Holding the phone horizontally, point the lens towards the subject of the video. 4 Tap the Record icon
Rename Tap to edit the name of the
selected video.
Tap to delete the video you just
once to start recording. 5 REC will appear at the bottom of the viewfinder with a timer showing the length of the video. 6 Tap the Stop icon
recorded. Tap OK to confirm it. The viewfinder will reappear.
Tap to record another video right
away. Your current video will be saved.
Tap to view the Gallery of your saved
on the screen to stop recording.
videos.
After recording a video A still image representing your video will appear on the screen.
to open the advanced options. Adjust the video camera settings by scrolling the list. After selecting the option, tap the Back key
Play Tap to play the video.
Share Tap to share the picture via
. Video size – Tap to set the size (in pixels) of the video you record. Select the video size from Full HD(1920X1088), HD(1280X720), TV(720X480), VGA(640X480), QVGA(320X240) and QCIF(176X144)(MMS).
various methods such as Bluetooth or Messaging.

White balance – The white balance ensures any the white areas in your video are realistic. To enable your camera to adjust the white balance correctly, you may need to determine the light conditions. Choose from Auto, Incandescent, Sunny, Fluorescent, and Cloudy. Colour effect – Choose a colour tone to use for your new video. Audio recording – Choose Mute to record a video without sound. Auto review – If you turn Auto review on, it will play back the video you just recorded automatically.
Adjusting the volume when viewing a video To adjust the volume of a video while it is playing, use the Volume Keys on the left side of the phone.
– Restore all video camera default
settings.
– Tap whenever you want to know how
a function operates. This will provide you a quick guide.
. 2 Your Gallery will appear on the screen. 3 Tap a video to play it automatically.

You can store multimedia files to a micro SD card to have easy access to all your image and video files.
Gallery menu options Tap a photo and tap the Menu Key
to see the following available options: Share, Delete, and More. Tap More to access Details, Set as, Crop, Rotate Right and Rotate left.
> Gallery.
View mode When you open the Gallery, your photos will be presented in Folder view. Once you open a folder, your photos will be in Grid view. When you tap a photo from Grid view, it will be displayed in Full view.
Sending a photo 1 To send a photo, touch and hold the photo you want. 2 Tap Share and choose from any of the available applications. 3 When you choose Email, Google Mail or Messaging, your photo will be attached to a message, which you can then write and send normally.
Calendar View In Folder view, tap
to change to the Calendar view. The calendar will open and you will see with photos taken on the days.
Timeline view The phone's Gallery provides a timeline view of your photos and videos. From the Grid view mode, drag
If you have a social networking account set up on your phone, you can share your photo with that social networking community.
to the right. The date you took your photos will be displayed starting with the most recent. If you select a specific date, all the photos you took on that day will be grouped together.
Sending a video 1 To send a video, touch and hold the video you want. 2 Tap Share and choose from any of the available applications.

3 When you choose Email, Google Mail or Messaging, your video will be attached to a message, which you can then write and send normally.
Transferring files using USB mass storage devices To transfer files using a USB device: 1 Connect the phone to a PC using a USB cable. 2 You can see USB connection mode popup. (From the Home screen, tap the Menu Key
Using an image Choose images to use as wallpaper or identify callers. 1 Touch and hold a photo, then tap More > Set as. 2 Choose from Contact icon or Wallpaper.
and tap Settings > Connectivity settings > USB connection mode > Mass storage.) 3 Tap Mass storage and OK to confirm. 4 You can view the phone content on your PC and transfer the files.
Viewing a slideshow To view a slideshow of your photos, open the Gallery and tap a photo. Once the photo is displayed, tap the screen to see the menu. Tap Slideshow to begin the slideshow of all your photos.
If you don't want to see USB connection mode popup, uncheck Don't ask again on USB connection mode popup or turn off Always ask (Settings > Connectivity settings > Always ask).
View photo details You can view a photo’s detailed information, such as the name, date, time, size, and type. While viewing a photo, tap Menu > More > Details.

Music Your phone has a music player that lets you play all your favourite tracks. To access the music player from the Home screen, tap the Applications Key
- When downloading music or video files,
copyright must be secured. Please note that a corrupted file or file with a wrong extension may cause damage to the phone.
and tap Music.
How to save music/video files to the phone
Playing music/video files Locate the file you want in the Gallery and tap it to play it.
Connect your phone to the PC using the USB cable. You'll receive a notification that the USB is connected and can see USB connection mode popup. Tap Mass storage and OK. Then open the folder you wish to view from your computer.
and tap Music. 2 Tap the Songs tab. 3 Tap the song you want to play. 4 Tap
Save music or video files from the PC to the phone's removable storage. - You may copy or move files from the PC
to pause the song. 5 Tap
to skip to the next song. 6 Tap
to go back to the beginning of the song. Tap
twice to go back to the previous song. To change the volume while listening to music, press the up and down Volume Keys on the left side of the phone.
to the phone's removable storage using a card reader. - If there is a video file with a subtitle file
(.smi file with the same name as the video file), place them in the same folder to display the subtitle automatically when playing the video file.

To display the options for a song, touch and hold any song in the list. You will see the following options: Play, Add to playlist, Use as ringtone, Delete, Share, Search, and Details.
To remove a song from a playlist 1 Open a playlist. 2 Touch and hold the song you want to remove, then tap Remove from playlist or when viewing the currently playing playlist, tap the Menu Key
Working with Playlists You can create playlists to organize your music files into sets of songs, which you can play in the order you set or in a shuffle.
, then tap Remove from playlist to remove all the songs from the current playlist.
To create a playlist 1 When viewing a list of songs in the library, touch and hold the first song you want to add to the new playlist. 2 Tap Add to playlist. 3 Tap New playlist. 4 Enter a name for the playlist, then tap Save. The new playlist is added to the Playlists library. You can also add the song that is playing in the Playback screen as the first song in a playlist by pressing the Menu Key
To rename or delete a playlist 1 Open the Playlist library. 2 Touch and hold the playlist to display the menu, then tap Delete or Rename.
Music file copyrights may be protected by international treaties and national copyright laws. Therefore, it may be necessary to obtain permission or a licence to reproduce or copy music. In some countries, national laws prohibit private copying of copyrighted material. Before downloading or copying the file, please check the national laws of the relevant country concerning the use of such material.
, then tapping Add to playlist or tapping Save as playlist to save all the songs in an album that you're playing as a playlist.

opens over the location. X Tap the balloon to access additional options. To view map, satellite, or traffic layers
Google applications, including mobile versions of Google Mail, Google Talk, Google Calendar, and Google Maps, are loaded on your phone. 1 First, set up a Google account. Then enter your user name and password and sign in. 2 After signing in, your contacts, email, and calendar in your Google account will automatically synchronize with your phone.
X Tap the Layers icon
on the map and select a layer option. You can choose from Traffi c, Satellite, Terrain, Latitude, or More Layers.
Google Maps™
To open Google Maps and view your location 1 From the Home screen, tap the Applications Key
You can search for a location and view it on a map. You can also search for places on the map that you're viewing. To search for a location 1 While viewing a map, tap the Search field at the top of the screen. You can also tap the Menu Key
and tap Maps. 2 Tap the My location icon
on the map.
The map centers on a blue dot that indicates your location. A blue circle around the dot indicates that your actual location is within the circle. To get an address and additional information for a location
and tap Search. 2 In the search box, enter the place you're looking for. You can enter an address, a city, or a type of business or establishment. For example, “theater in New York”. 3 Tap the Search icon.
X Touch and hold a location on the map. A balloon with the address and a thumbnail from Street View (if available)
Markers with letter labels indicate
search matches on the map.

To search for locations along your route
Location information might be inaccurate if GPS and Wi-Fi is turned off. Please make sure that GPS and Wi-Fi is turned on.
You can search for businesses, points of interest, and other features along your route. When you search while navigating, your results include locations along your route, rather than locations that are near your current location. X Tap the Search Key and search for locations of interest. The results are displayed as markers
To get directions 1 While viewing a map, tap the Menu Key
and tap Directions. 2 Enter a starting point in the first text box and your destination in the second text box.
along your route; the fi rst result is labeled. You can tap a label for more information about the marker. X When you're fi nished, tap the Navigation icon
To reverse directions, tap the Menu Key
and tap Reverse Start & End. 3 Tap the icon for car, public transit, or walking directions. 4 Tap Get directions. The directions to your destination appear in a list.
to return to Navigation View.
My Places My Places bookmarks your favourite places, such as addresses or local businesses, to be able to find them quickly later.
To view turn-by-turn directions in a list
You can view each turn in your route as a list of written directions. When viewing a list of directions, tap the Navigation icon
To view My Places While viewing a map, tap the Menu Key
and tap My Places.
to view turn-by-turn directions in Navigation View.
Clear Map Clear any information, such as routes and search results, from the map.

To clear a map While viewing a map, tap the Menu Key
X While viewing a map, tap the Menu Key
and tap Latitude.
and tap Clear Map.
To invite friends to share their locations After you join Latitude, you can start sharing your location with your friends. Only friends whom you have explicitly invited or accepted can see your location. 1 Open Latitude, tap the Menu Key
Finding Your Friends with Google LatitudeTM
Google Latitude lets you and your friends view each others' locations on maps and get directions to your friends' locations using Google Latitude. Your location is not shared automatically. It is by invitation only. You must join Latitude and then invite your friends to view your location or accept invitations from your friends.
and tap Add friends. 2 Tap Select from Contacts or Add via email address in the menu that opens. 3 Tap Add friends at the bottom of the screen. If your friends already use Latitude, they receive an email request and a notification on Latitude. If they have not yet joined Latitude, they receive an email inviting them to sign in to Latitude with their Google Account.
To join Latitude X While viewing a map, tap the Menu Key
and tap Join Latitude. The first time you join Latitude, you're
prompted to accept or reject the Google privacy policy. After you've joined Latitude, the Join Latitude option changes to Latitude.
To fi nd places Tap the Places icon
while in Google Maps to find different venues, such as gas stations, coffee shops, bars, restaurants, etc.
To open Latitude After you join Latitude, you can open it to find your friends and view their updates.

Once you select a category, you will see a list of closest matches, including their distance, compass bearing, description and even user reviews. You can customize your own location search categories, and even add the Places icon to your Home screen.
To download applications and games 1 From the Play Shop home page, tap a category near the top of the screen. 2 Scroll to view subcategories and tap the one you want to explore. 3 Tap an application to open its details screen, or further sort the subcategory by tapping Top paid, Top free, Top Grossing, Top New paid, Top New Free, Trending. 4 Tap the application you desire to install. The descriptions and the prices of the application will be displayed. 5 Tap the price button at the top right of the screen for paid applications. For free applications, tap the FREE button. The applications will then be downloaded and installed.
While viewing a map, tap the Menu Key
> More for the following options: Labs, Cache Settings, Help, Terms, Privacy & Notices and About.
Play Shop™ Play Shop™ lets you browse through and download thousands of fun and useful applications and games. You can check other users' comment regarding an application or you can post your own comments. If you install applications and games from Play Shop™, they appear in the phone's menu below the preloaded applications, and you can find them by scrolling down with your finger. You can open downloaded applications from the Play Shop by tapping the Menu Key
To purchase a paid app, you’ll need to set up a payment method with Google Checkout™. You have the option to use a credit card or charge to your carrier bill.
> My apps.

When you want to exit a game or application, use the Home or Back Key, which will return you to the Home screen. Or select Menu (or Options) within the game or application and select Exit. (Exit option may vary by game/application). Ending applications that continue to run in the background (after going back to the Home screen) will help conserve battery life and reduce unwanted data usage.
and tap Accounts > Add account to add another Google Mail account. You can also change the settings by tapping the Menu Key
> More > Settings from any screen within an account.
Google Talk™ Google Talk™ is Google’s instant messaging program. It lets you communicate with other people who also use Google Talk™. Tap the Menu Key
Google Mail™ Google Mail™ can be configured when you first set up your phone. Depending on your synchronization settings, Google Mail™ on your phone is automatically synchronized with your Google Mail™ account on the web.The inbox conversations list is your default Google Mail™ view. Tap the Menu Key
for the following available options. All friends
– Displays all friends you can communicate with. Add friend
– Send invitations to chat. Search
– It searches for contacts to chat with or any chat records that contain the word(s) you entered. Sign out
, then tap Refresh to send or receive new email and to synchronize your email with your Google Mail™ account on the web. Tap the Menu Key
– Sign out from chat. When you tap the Talk icon from the Home screen, you will be signed in automatically if you activate Sign in automatically.
for the following additional

– Allows you to adjust various settings. More
4 Tap Vibrate to choose the vibration setting when you receive a notification of a new chat.
– Choose from End all chats to close all the current chats, Invites to see a list of friends you have invited to chat, or Blocked to view a list of friends you have blocked.
To show or hide the mobile indicator to friends 1 From the Friends list, tap the Menu Key
, then tap Settings. 2 Checkmark or uncheck Mobile indicator. If Mobile indicator is checkmarked, your friends see an outline of an AndroidTM next to your name in their Friends list when you are signed into Google Talk on an Android phone.
Changing Google Talk Settings You can configure Google Talk to send you a notification of each message that you receive in a chat and also to sound a ringtone or vibrate the phone. You can also configure Google Talk to sign you in automatically when you turn on your phone, and you can set whether the mobile indicator is displayed next to your name in other people's Friends lists.
To set whether you sign into Google Talk automatically 1 From the Friends list, tap the Menu Key
, then tap Settings. 2 Checkmark or uncheck Automatically sign in. When Automatically sign in is checked, you are signed into Google Talk when you turn on your phone.
To configure notifications for new Google Talk messages 1 From the Friends list, tap the Menu Key
, then tap Settings. 2 Checkmark notifications to receive a notification in the Status Bar when a new chat message arrives. 3 Tap Select ringtone to choose a ringtone that will ring to notify you of a new chat.
Settings

To set Google Talk to change your status 1 From the Friends list, tap the Menu Key
, then tap Settings. 2 Checkmark or uncheckmark Automatic away-status. When Automatic away-status is checkmarked, your status will automatically be changed to Away when the screen is turned off.

Adding an event to your calendar
and tap Alarm/ Clock. 2 To add a new alarm, tap the
tab (if necessary). 3 Tap New alarm and set the alarm time. 4 Set any other desired options and tap Save. 5 Tap the Menu Key
You must create a Google account to use Calendar.
1 From the Home screen, tap the Applications Key
and tap Calendar. 2 To view an event, tap the date. The events occurring on that date are displayed below the Calendar. Tap the event to view its details. If you want to add an event, tap
to add another alarm or adjust the alarm settings.
at the top right corner of the Calendar. 3 Tap the What field and enter the event name. Check the date and enter the start and end time you want your event to begin and finish. 4 Tap the Where field to enter the location. 5 To add a note to your event, tap the Description field and enter the details. 6 To repeat the event, set Repetition, and set Reminders, if necessary.
and tap Calculator. 2 Tap the number keys to enter numbers. 3 For simple calculations, tap the function you want (+, –, x, or ÷), followed by =. 4 For more complex calculations, tap the Menu Key
, tap the Advanced panel, then choose an option.

7 Tap Save to save the event in the calendar. A coloured square in the calendar will mark all days that have saved events. An alarm will sound at the event start time if you set it.
4 Tap the Menu Key
> New File to start a new document. 5 Tap a document type. 6 Enter contents in the document using the tools at the bottom of the screen. 7 When you're done working on the document, tap the Menu Key
Changing your calendar view 1 From the Home screen, tap the Applications Key
> Save > Save (or Save as to enter a new document name) to save. 8 Tap the Back Key
and tap Calendar. 2 At the top of the Calendar, tap Day, Week, Agenda, or Month.
to exit.
Polaris Office With Polaris Office, you can view, create and edit document files on your device. The loaded files can be from micro SD cards of your device, or from downloaded email attachments. The Polaris Office application supports the following file formats: txt, doc, docx, xls, xlsx, ppt, pptx, pdf.
View and edit a document on your device 1 From the Home screen, tap the Applications Key
> Polaris Office. 2 Tap My Folders for folders and documents on your micro SD card. 3 Move to the folder that contains the file that you want to open if it is not in the root directory. Tap the document that you want to view or edit.
Create a New Document 1 From the Home screen, tap the Applications Key
> Polaris Office. 2 Register your name and email address on the User Registration page. If you want to skip the registration process, tap Later. 3 Tap My Files for folders and documents on your micro SD card.

a document. 1 To display the toolbar in an existing document, Tap the Menu Key
You can also open an attachment in an email by tapping the attachment in the message.
then select Edit Mode. 2 Tap a toolbar icon and the corresponding tool options will be displayed in a pop-up balloon for you to tap and use. 3 To hide the tool options pop-up balloon, tap the toolbar icon again. Left and right arrows on the toolbar indicate that you can scroll horizontally for more icons. The tools in the toolbar vary depending on the document type.
4 The document opens for you to view. If you want to edit it, Tap the Menu Key
then select Edit Mode.
X To move between pages or pan through the document, scroll in the corresponding direction.
X To change the zoom level, tap the Menu Key
> Zoom, then tap the zoom level you want or simply pinch-to zoom to achieve the zoom level you want.
Manage documents online 1 From the Home screen, tap the Applications Key
X Use the toolbar at the bottom of the screen to edit the document (Word, Excel, or PowerPoint file).
> Polaris Office. 2 Tap Add account > Box.net for access to your online account. 3 Enter your Email account and password to access your account then tap Add. 4 View and manage your documents on the server as desired.
X Tap the Menu Key
for additional menu options such as Reflow text, Bookclip, Send file, and Setting 5 When you're finished editing, tap Save. Then, tap the Back Key
to exit.
Polaris Office document tools The Polaris Office application has a toolbar that appears automatically when you create

Voice Control You can search by voice and complete other voice actions, such as calling or texting a contact, sending an email, creating a note or getting directions with just a simple tap of the Voice Control icon. 1 From the Home screen, tap the Applications Key
Sending the voice recording 1 Once you have finished recording, you can send the audio clip. Tap Share. 2 Choose from Bluetooth, Wi-Fi share, Email, Google Mail and Messaging. When you select Email, Google Mail or Messaging, the voice recording will be added to a message that you can write and send normally.
> Voice Search. 2 Wait for the "Say a command" prompt, then say your query. 3 For a query, the search results will be displayed in the web browser. Tap the result you want or continue searching.
App Manager You can manage your programs with App Manager. 1 You are allowed to see the currently using applications by tapping on the Running apps tab. The applications with high consumption of resource will have descriptions in red. Touch stop icon to terminate the applications. 2 You are allowed to see the installed applications by tapping on the Installed apps tab. 3 You are allowed to see the capacity of System memory and SD card by tapping the Storage tab. 4 You can place the App Manager widget on the homescreen and easily check the number of currently running applications.
Voice recorder Use the voice recorder to record voice memos or other audio files.
Recording a sound or voice 1 From the Home screen, tap the Applications Key
and tap Voice Recorder. 2 Tap
z Record to begin recording. 3 Tap
Stop to end recording.
List to access your voice recordings. You can listen to the saved recordings.

Browser The Browser gives you a fast, full-colour world of games, music, news, sports, entertainment, and much more, right on your mobile phone.
Windows – Shows all your open
windows.
New windows – Opens a new window.
Settings – Moves to Browser settings.
to view the following options:
Additional charges apply when connecting to these services and downloading content. Check data charges with your network provider.
Read it later – To add the current web
page in Read it later.
Add RSS Feed – To add your favourite
web page. When a new item appears on the web site, you are automatically notified with Google reader.
< Tool bar > The icons bar on the screen below makes it easier to use the browser. The browser that allows you to look at webpages similarly to how you would on a computer.
Back – Moves to the previous web
page.
Forward – Used in conjunction with
the Back Key. This allows you to go back and forth between web pages without opening multiple windows.

Share page – Tap to share the web
RSS (Really Simple Syndication) is a family of web feed formats used to publish frequently updated content, such as blog entries, news headlines or podcasts. An RSS document, called a feed, web feed or channel, contains either a summary of content from an associated website or its full text. RSS makes it possible for people to keep up-to-date with their favourite websites in an automated way that is easier than checking manually. The user subscribes to a feed by entering its link into the reader or clicking an RSS icon in a browser that starts the subscription process. The reader checks the user’s subscribed feeds regularly for new content, and downloads any updates it fi nds. For unavailable RSS Feed web pages, the 'Add RSS Feed' icon menu will be disabled.
page.
Find on page – Allows you to find text
on the current web page.
Select text – To select text on the web
page. Highlight the text you want with your finger. The highlighted text is copied to the clipboard and you can paste it anywhere that allows text to be entered.
To return to the previous web page, tap the Back key

and set any desired options.

LG On-Screen Phone 2.0 On-Screen Phone allows you to view your mobile phone screen from a PC via a USB, Bluetooth, or Wi-Fi connection. You can also control your mobile phone from your PC, using the mouse or keyboard.
and drag on your PC screen. - Text input with keyboard: allows you to
compose a text message or note using your computer keyboard. - File transfer (mobile phone to PC):
sends a File from your mobile phone (e.g. Gallery, Video Player, music and Polaris Office) to your PC. Simply right-click and drag to send a File to your PC. - File transfer (PC to mobile phone):
Connects your mobile phone to your
PC, or disconnects it.
Rotates the On-Screen Phone window
sends files from your PC to your mobile phone. Simply select the files you wish to transfer and drag and drop into the on-Screen phone window. the files you send are stored on OSP folder. - LG Home Panorama: Shows the whole
(only available with applications that support rotation).
Launches LG Home Panorama or
changes the On-Screen Phone preferences.
Maximizes the On-Screen Phone
work spaces of LG Home. You can easily organise icons or widgets and run an application by double-clicking the shortcut. NOTE: Please make sure that LG Home is the default launcher. Some widgets may not work properly on the LG Home Panorama.
window.
Exits the On-Screen Phone program.
Minimizes the On-Screen Phone
window.
On-Screen Phone features - Real-time transfer and control: displays
and controls your mobile phone screen when connected to your PC. - Mouse control: allows you to control your
mobile phone by using the mouse to click
On-Screen Phone icons

How to install On-Screen Phone on your PC Visit LG Home (http://www.lg.com) and go to Support > Mobile Phone Support > Select the Model ( LG-P936 ) > Click OSP ( On-Screen Phone ) to download. You can install the On-Screen Phone on your PC.
Please make sure that On-Screen Phone check box in Settings > Connectivity > On-Screen Phone is selected. Please make sure that the battery may run out more quickly due to the current consumption if On-Screen Phone is connected via Wi-Fi. When you connect your mobile phone to your PC via Mobile Hotspot and access to the Internet on the PC, additional data charges may be incurred depending on your DataPro data plan. Access to the Internet using Wi-Fi networks may not work well depending on the network's traffic. When you enlarge the On-Screen Phone window, the display on the screen might become slow.
How to connect your mobile phone to your PC On-Screen Phone 2.0 provides USB, Bluetooth and Wi-Fi connection. Please follow the instruction on Connection Wizard of OSP program.

To check the phone-to-PC connection Once the devices have been connected, drag down the Status Bar at the top of the Home screen to check the On-Screen Phone connection status.
To disconnect your phone from your PC Click
in the top left of the On-Screen Phone window. Alternatively, drag down the Status Bar at the top of the Home screen and select "On-Screen Phone connected" > "Disconnect On-Screen Phone". Touch "Disconnect" in the disconnect dialog.

Wireless & networks This menu allows you to manage Wi-Fi and Bluetooth connections, portable hotspot and data tethering, airplane mode and VPN connections. To access this menu, from the Home Screen, tap Menu Key
Wi-Fi – Turns on Wi-Fi to connect to available Wi-Fi networks. Wi-Fi settings – Allows you to set up and manage wireless access points. Set network notification or add a Wi-Fi network. The advanced Wi-Fi settings screen is accessed from the Wi-Fi settings screen. Press the Menu key and touch Advanced. Wi-Fi Direct settings – Tick the check box to make Wi-Fi Direct active. Set Wi-Fi Direct device name and scan for other devices. Bluetooth – Turn the Bluetooth wireless feature on or off. Bluetooth settings
> Settings > Wireless & networks.
Airplane mode Airplane mode allows you to quickly turn off all wireless connections. 1 From the Wireless & networks screen, tap the Airplane mode checkbox to turn it on (a blue checkmark will appear). 2 Tap again to turn it off. OR 1 Press and hold the Power/Lock Key
and tap Airplane mode. 2 Press and hold the Power/Lock Key
visible to other Bluetooth devices. - Scan for devices: Set your device to be
and tap Airplane mode again to turn it off.
visible to other Bluetooth devices. Tethering & portable hotspot – You can configure the tethering and portable Wi-Fi hotspot settings. VPN settings – Displays the list of Virtual Private Networks (VPNs) that you've previously configured. Allows you to add different types of VPN.

Mobile networks – Set options for data roaming, network mode & operators, access point names (APNs) and so on.
Audible touch tones - Select whether to hear tones when you use the dialpad. Audible selection - Select whether to hear sound when you tap buttons, icons, and other onscreen items. Screen lock sounds - Select whether to hear sound when the screen is locked or unlocked. Haptic feedback – Vibrate when pressing soft keys and on certain user interface interactions.
Call settings You can set Fixed Dialing Numbers, Voicemail and Other call settings including Call reject, Call forwarding, Additional settings, Send Messages, Call duration.
Sound Adjust sound, notification default settings and vibrate mode. You can also manage audible and Haptic feedback. Silent mode - Checkmark this to silence all sounds except media and alarms. Vibrate - Set the option of whether to let the phone feedback you with vibration. Volume - Adjust the phone's volume settings to suit your needs and your environment. Phone ringtone - Select the ringtone for incoming calls. Notification ringtone - Select the ringtone for notifications such as new messages receipt or calendar events.
Display Brightness – Adjust the brightness of the screen. Auto-rotate rotation – Set to switch orientation automatically when you rotate the phone. Animation – Set to allow animations. Screen timeout – Set the time delay before the screen automatically turns off. Display font - Change the display font. Front Key LED timeout - Set the time delay before the LED on the front side of your phone automatically turns off. Screen optimization - Change the resolution size of downloaded applications to fit the screen size.

Motion sensor calibration - Allows you to reset calibration for motion sensor.
using Wi-Fi and mobile networks. When you check this option, you’re asked whether you consent to allowing Google to use your location when providing these services. Use GPS satellites – If you check Use GPS satellites, your phone will be determine your location to street-level accuracy. Set up screen lock – Set an unlock pattern to secure your phone. Opens a set of screens that guide you through drawing a screen unlock pattern. You can set a PIN or Password instead of a Pattern or leave it as None. When you turn on your phone or wake up the screen, you're prompted to draw your unlock pattern to unlock the screen. Screen lock timer - Set the amount of idle time before the screen lock is enabled. Set up SIM card lock – Set up SIM card lock or change SIM PIN. Visible passwords – select to show passwords as you type them or deselect to hide passwords as you type them. Select device administrators – Add or remove administrators. Use secure credentials – Allows you to access secure certificates
Gesture Move cursor - Checkmark to set the device to move the cursor by tapping on any side of the device to move the cursor while typing. Relocate item - If you checkmark this, you can relocate an item to other home screens by touching and holding an item and tilting the device. Mute - Checkmark this to mute the incoming call by flipping the phone over while the phone is ringing. Snooze (stop) - Checkmark this to snooze(stop) the alarm by flipping the phone over. Previous/Next item - Checkmark this to display a previous/next photo in Gallery by tapping on the left/right side of the phone. Pause - Checkmark this to pause the video by flipping the phone over.
Location & security Use wireless networks – If you check Use wireless networks, your phone will determine your approximate location by

Install from SD card – Choose to install encrypted certificates from your micro SD card. Set password – Set or change the credential storage password. Clear storage - Clear credential storage of all contents and reset its password
When you can’t recall your Unlock Pattern, PIN, or Password:
If you logged into a Google account on the phone and failed to use the correct pattern 5 times, tap Forgot Pattern? You will be required to sign in with your Google account and prompted to create a new unlock pattern. If you haven’t created a Google account on the phone or you forgot your PIN or Password, you need to perform a hard reset.
Using the Unlock Pattern, PIN, or Password Set an unlock Pattern, PIN, or Password to secure your phone. To set the screen lock, follow the process below. Tap the Menu Key
, tap Settings > Location & security > Set up screen lock and select between Pattern, PIN or Password.
If you perform a hard reset, all user applications and user data will be deleted. Please remember to back up any important data before performing a hard reset.
Take precautions when using an Unlock Pattern, PIN, or Password. It is very important that you remember the screen unlock information you set. You are allowed 5 attempts to enter your screen unlock information. If you used up all 5 opportunities, you will have to wait 30 seconds to attempt unlocking the phone again.
1 Turn the power off. 2 Press and hold the following keys at the same time for 8 seconds: Power/Lock Key + Down Volume Key. 3 When FACTORY HARD RESET screen is displayed, release the keys. 4 Press the Power/Lock Key to confirm -- delete all user data, and press the Volume Keys to cancel.

Applications Unknown sources - Checkmark to permit the installation of applications you get from Web sites, email or any other locations other than Play Shop.
Accounts & sync Allows you to enable Background data, Auto-sync and synchronize or add new accounts.
Privacy Allows you to perform a Factory data reset. Be careful as this will erase all your data.
Depending on the applications you install, the mobile phone may not operate correctly and could be illegally used to establish your location and gain access to personal information via the Internet.
SD card & phone storage Allows you to check total available micro SD card space. You can also unmount the micro SD card to safely remove it or format it.
To protect your phone and personal data, only download applications from trusted sources such as Play Shop. Manage Applications – Manage and remove installed applications. Running services - Check currently running services. Storage use – View storage used by applications. Battery use – See what has been using the battery. Development – Set options for application development.
Language & keyboard Select language and customize the input method and keyboard settings.

Voice input & output Set Voice recognizer settings and use the Text-to-Speech settings to configure the Android text-to-speech synthesiser, for applications that can take advantage of it.
Date & time Set date, time, time zone and date and time formats.
About phone View legal information, check phone status and software versions, and perform the software update.
Accessibility Use the Accessibility settings to configure any accessibility plug-ins you have installed on your phone.
Requires additional plug-ins to become selectable.
Connectivity settings USB connection mode - Your phone can be used as a mass storage device if you have a memory card inserted. You can set Mass storage as a default setting for USB connection mode. On-Screen Phone - Tap this icon to use On-Screen Phone. See On-Screen Phone on page 77 .

Phone Software Update This feature allows you to update the firmware of your phone to the latest version conveniently from the internet without the need to visit a service center. For more information on how to use this function, please visit: http://www.lg.com As the mobile phone firmware update requires the user’s full attention for the duration of the update process, please make sure to check all instructions and notes that appear at each step before proceeding. Please note that removing the USB cable or battery during the upgrade may seriously damage your mobile phone.
> Settings > About phone.You can check the software version at the bottom of the list. To perform the phone software update, tap the Menu Key
> Settings > About phone > Software update > Check now for update.
LG Mobile Phone Software update via Over-the-Air (OTA) This feature allows you to update the firmware of your phone to the newer version conveniently via OTA without connecting the USB data cable. This feature is only available if and when LG makes the newer version of the firmware available for your device. First, you can check the software version

Your personal data—including information about your Google account and any other accounts, your system/ application data and settings, any downloaded applications and your DRM licence —might be lost in the process of updating your phone's software. Therefore, LG recommends that you back up your personal data before updating your phone's software. LG does not take responsibility for any loss of personal data.

DivX Certified® to play DivX® video up to HD 720p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Dolby Mobile Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video- on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx. com for more information on how to complete your registration.

These accessories are available for use with the LG-P936. (Items described below may be optional.)
Data cable Connect your LG-P936 and PC.

User Guide Learn more about your LG-P936.
Travel adaptor · Stereo headset

LG Twin Tower 20,Yeouido-dong, Yeongdeungpo-gu Seoul, Korea 150-721
GSM 850 / E-GSM 900 / DCS 1800 / PCS 1900 Quad Band , WCDMA and LTE Terminal Equipment
LG
EN 301 489-01 V1.8.1 / EN 301 489-7 V 1.3.1/ EN 301 489-17 V 2.1.1 / EN 301 489-19 V 1.2.1 / EN 301 489-24 V1.5.1 EN 60950-1:2006+A11:2009 EN 50360:2001 / AC:2006 / EN62209-1:2006 / EN62209-2:2010 / EN 62311:2008 / EN 62479:2010 EN 300 328 V1.7.1 EN 301 511 V9.0.2 EN 301 908-1 V5.2.1 / EN 301 908-2 V5.2.1/EN 301 908-13 V5.2.1
The conformity to above standards is verifi ed by the following Notifi ed Body(BABT)
BABT, Forsyth House, Churchfi eld Road, Walton-on-Thames, Surrey, KT12 2TD, United Kingdom Notifi ed Body Identifi cation Number : 0168
I hereby declare under our sole responsibility that the product mentioned above to which this declaration relates complies with the above mentioned standards and Directives
Doo Haeng Lee/Director 19. Mar. 2012
LG Electronics Logistics and Services B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands

This chapter lists some problems you might encounter while using your phone. Some problems require you to call your service provider, but most are easy to fix yourself.
Message Possible causes Possible corrective measures
There is no SIM card in the phone or it is inserted incorrectly.
Make sure that the SIM card is correctly inserted.
Signal is weak or you are outside the carrier network. Operator applied new services.
Move towards a window or into an open area. Check the network operator coverage map. Check whether the SIM card is more than 6~12 months old. If so, change your SIM at your network provider's nearest branch. Contact your service provider.
No network connection/ Losing network
To change a security code, you will need to confirm the new code by re-entering it. The two codes you have entered do not match.
Codes do not match
If you forget the code, contact your service provider.
Any application cannot be set
Not supported by service provider or registration required.
Contact your service provider.
Dialing error New SIM card inserted. Pre-paid charge limit reached.
New network not authorised. Check for new restrictions.
Contact service provider or reset limit with PIN2.
SIM error · Calls not available

Message Possible causes Possible corrective measures
On/Off key pressed too briefly. Battery is not charged. Battery contacts are dirty.
Press the On/Off key down for at least two seconds. Charge battery. Check charging indicator on the display. Clean the battery contacts.
Phone cannot be switched on
Battery is not charged. Outside temperature is too hot or cold. Contact problem
Charge battery.
Make sure phone is charging at a normal temperature. Check the charger and connection to the phone. Check the battery contacts and clean them if necessary. Plug the charger into a different socket. If the charger does not warm up, replace it. Only use original LG accessories. Replace battery. Number not permitted
No voltage Charger defective
Wrong charger Battery defective
The Fixed dialling number function is on. Check the Settings menu and turn the function off.
Impossible to receive / send SMS & picture
Memory full Delete some messages from the phone.
Unsupported file format Check the file formats that can be supported.
SD card not working
FAT16, FAT32 file system supported
Check SD card file system via card reader, or format SD card using the phone.
Charging error · Files not opening

Message Possible causes Possible corrective measures The screen does not turn on when I receive a call.
If you use any protection tape or case, check to see if it has covered the area around the proximity sensor. Make sure that the area around the proximity sensor is clean.
No sound Vibration mode Check the settings status of the sound menu to make sure you are not in vibrate or silent mode.
Remove the battery, insert it again and switch on the phone. Try to perform a software update via the website.
Hang up or freeze
Phone locked and does not function.
Proximity sensor problem · Intermittent software problem · Restarting the phone


Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.