Instruction/ maintenance manual of the product DD9693-M AEG
Go to page of 16
DD9663-M UK DD9693-M UK Cooker Hood Operating and Installation Instructions.
2 For the User Important Safety Information Y our Appliance Operating Instructions Cooker Hood Controls T o Operate Recirculation Extraction Maintenance and Cleaning External Cleaning Metal Grease Fil.
3 Installation • Any installation work must be undertaken by a quali - ed electrician or competent person. • This hood must be installed in accordance with the installation instructions and all measuremen ts adhered to.
4 YOUR APPLIANCE.
5 OPERA TING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam . Key Function Display A T urns the Lighting System on and off. On or Off B T urns the Motor on and off. On or Off C Activates speed one.
6 This cooker hood can be used to recirculate or extract contaminated air . Recirculation Mode The cooker hood is supplied specied for use in the recir - culation mode with the charcoal lter tted. The contaminated air is cleaned by passing through the lters and than back into the kitchen.
7 MAINTENANCE AND CLEANING Before car r ying out any maintenance or lean- ing isolate the cooker hood fr om the mains supply . The cooker hood m ust be kept clean, as a build up of grease or fat can be a fir e hazard. External Cleaning The metal casing, grille and chimney shoul d be cleaned at least once a month to keep it looking like new .
8 MAINTENANCE AND CLEANING Alarm signal reset • T urn the Lights and the Suction motor off. • Press button H and hold for at least 2 seconds, conrmation is provided by the fact that the Led goes out. Before car r ying out any maintenance or cleaning isolate the cooker hood fr om the mains supply .
9 Changing the Halogen Spot Lamp • Extract the lamp from the lamp holder by pulling gently . • Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. Replacement filters and light bulbs can be obtained from y our local Service Force Centr e.
10 SOMETHING NOT WORKING SERVICE AND SP ARE P ARTS If, having followed these instructions carefully , your cooker hood fails to work properly please carry out the following checks.
11 GUARANTEE CONDITIONS Standard Guarantee Conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG built-in appliance or any part thereof is proved to be defective .
12 INST ALLA TION INSTRUCTIONS Itisdangeroustoalterthespecicationsorattempttomodifythisproductinanyway .
13 INST ALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. Allinstallationsmustcomplywiththe local authoritiesrequirementsforthedischargeof exhaustair .
14 INST ALLA TION INSTRUCTIONS W all drilling and bracket xing W all marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob.
15 Hood body mounting • Before attaching the hood body , tighten the two screws V r located on the hood body mounting points. • Hook the hood body onto the screws.
436004092_02 - 080826 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
An important point after buying a device AEG DD9693-M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG DD9693-M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG DD9693-M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG DD9693-M you will learn all the available features of the product, as well as information on its operation. The information that you get AEG DD9693-M will certainly help you make a decision on the purchase.
If you already are a holder of AEG DD9693-M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG DD9693-M.
However, one of the most important roles played by the user manual is to help in solving problems with AEG DD9693-M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG DD9693-M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
