Instruction/ maintenance manual of the product Valeo Computer Tech Link
Go to page of 44
User Manual Congratulations! Your new CTL Computer System is a powerful, state-of-the-art electronic product that can both increase your productivi ty and provide you with a new level of entertainment and educational opportunities.
- 2 - Important Information Notes, Cautions, and Warnings Throughout this guide, blocks of text will be displa yed inside two parallel bold lines to indicate a Note, Caution, or Warning, described below: NOTE A NOTE details important information to k eep in mind.
- 3 - Typographical and Listing Conventions The following list defines typographical conventions used to depict specific elements of text used in this manual: • Titles of windows, names of buttons and icons, and menu options that appear on the display screen are presented in bold.
- 4 - System Configuration Your CTL computer comes fully tested and configured for optimum performance and compatibility. CTL’s engineers have used considerable expertise and spent a great deal of time in the installation, configuration, and optimization of your hardware and software.
- 5 - Exclusions from CTL Corporation Limited Warranty Programs All other expressed and implied warranties for CTL products purchased from CTL after January 1, 2002 are hereby disclaimed. If this product is not in good working order as warranted above, CTL Corporation’s sole and exclusive remedy shall be repair or replacement as stated above.
- 6 - Your Serial Numbers Please use the space below to writ e your system’s serial number. System Serial Number: ________________________________ Warranty Number: ________________________________ These numbers are located on the back of your computer.
- 7 - Federal Communications Commission Radio Frequency Interference Statement This equipment generates and uses radio frequency and if not installed and used properly (that is, in strict accordance with the manufacturer's instructions) may cause interference to radio and television reception.
- 8 - Table of Contents Chapter 1 CTL Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Valeo™, Vision™ & Vista™ 10 V e c t o r ™ 10 M e r i d i a n ™ 10 N e x u s ™ 10 Chapter 2 Getting Started .
- 9 - FireWire™ IEEE 1394 26 Small Computer Systems Interface (SCSI) 26 Network Interface Card (NIC) 26 FAX/Modem 27 Operating System 27 S e c u r i t y 2 8 Power Management 28 Chapter 4 Getting the Most From Your System . . . . . . . . . . . . . . .
- 10 - 1. CTL Models CTL Corporation desktop systems are available in six distinct series: Valeo™, Vision™, Vista™, Vector™, Meridian™ and Nexus™. The systems in each series have been designed with specific functions in mind and are geared towards various computing environments.
- 11 - 2. Getting Started This chapter contains information needed to set up your computer for the first time. It includes information on planning your workspace, ergonomics, unpacking your new computer, and connecting components and peripherals.
- 12 - • Your chair should provide good lumbar (lower back) support. • Your forearms should be horiz ontal and wrists in a comfortable neutral position while typing or using the mouse. • There should be space to rest your hands on your desk while using the keyboard/mouse.
- 13 - Unpacking Your System Make sure the location you select for your new computer has room for the monitor, keyboard, mouse, case, speakers, printer, and other com ponents. Be sure the electrical outlets are grounded and that you are using a surge suppressor.
- 14 - Identifying Ports CTL computers are built-to-order and the layout and configuration of your system determines the location of the different connectors . It is important that you pay par ticular attention to the labels above the connectors when attaching the components.
- 15 - Game, Joystick, or MIDI Port The game port, also sometimes referred to as t he MIDI or joystick port, uses a 15-pin female connector to connect a joystick or game pad. This port is on the front control panel of some computers. Be aware that the standard Thick Et hernet connector is identical to the game port connector.
- 16 - Making Connections Please read the following warning and cauti onary notes before making any connections. WARNING! Route all cables where no one will trip on them and where the cables will not be subject to abrasion or other damage. Frayed c ables could cause personal injury and/or damage to your computer.
- 17 - • Network. Will vary according to the type of card - could be coaxial cable (BNC) or twisted-pair (RJ-45). 6. Connect one end of the monitor power cord to the monitor and the other end to a surge suppressor. 7. Connect one end of the system power cord to the system and the other end to a surge suppressor.
- 18 - 3. Using Your Computer This chapter contains information on using your new CTL system and its components, as well as some tips on how to achieve maximu m performance from your computer. Turning Your System On The Pow er and Reset buttons for most systems are located on the front of the computer case and are clearly marked.
- 19 - applies to you. Restart Procedures • If you are using Windows XP, Window s 98, Windows NT 4.0, Windows 2000 Professional, or Windows Me, click Start at the bottom left of your screen, then select Shut Dow n . Click Restart from the menu that appears.
- 20 - • Powering the system off after completing your work - This alternative is best if you use the computer infrequently, especially w here the periods of use are short. • Leaving the system on and only power ing off at the end of the day - If you use your computer many times a day or for long peri ods, it is probably better to leave it on.
- 21 - follow the shutdown procedure described in “Turni ng Your System Off,” found earlier in this chapter. The power indicator light illuminat es whenever the system is on.
- 22 - ROM drives have an earphone jack and volume contro l. This allows you to enjoy CD audio even if your computer does not hav e a sound card and/or speakers. NOTE Unlike most stereo systems, plugging earphones into the CD-ROM will not disable any external speakers attached to your system.
- 23 - will slide partway out of the drive. Grasp it by the edges, and lift it gently out of the slot. Tray-equipped CD-ROM: Use the following procedure to load a CD into a tray-equipped CD-ROM: 1. Press Eject to open the CD-ROM tray. 2. Pick up the CD-ROM by the edges and i dentify the side with writing on it.
- 24 - 17GB. Also, DVD-ROM drives can read standard audi o or data CDs. If your CTL computer comes with a DVD-ROM drive, please refer to the uni t's documentation for complete information on using your DVD capabilities.
- 25 - 1024 x 768. Some monitors can achieve reso lutions as high as 2048 x 1536. The higher you set the resolution on your monitor, the larger the viewable desktop, with the limit dictated by the physical size of your screen. WYSIWIG (W hat-You-See-Is-What-You-Get) resolutions are resolutions that correspond 1:1 to the printed output.
- 26 - supported by Windows XP, Windows 98, Windows Me, and Windows 2000. Please refer to the device-specific documentation for info rmation on using devices with USB. FireWire TM – IEEE 1394 FireWire provides a plug-and-socket connection on which up to 63 devices can be attached with data transfer speeds up to 400 Mbps.
- 27 - Networks may use third-party software such as Nove ll® or Banyan to configure individual NICs as well as the network itself, or they may rely on Windows' built-in networking capabilities. A typical network connection allows your computer to acce ss additional remote drives/devices as if they were local drives, i.
- 28 - Security Physical security involves placing the computer in an inherently safe location (for example, in a secured building). Security personnel or your supervisor may have complete information regarding physical security issues. Access-control security protects your computer from unauthorized use.
- 29 - 4. Getting the Most From Your System Like an automobile, a computer gets out of tune with use. This chapter descr ibes how to maintain your computer for maximum performance. Ma intaining your system is an ongoing process requiring conscious thought and effort, but the time invested will pay off in increased performance and reliability.
- 30 - • Make regular backups of syst em files, applications, and data - You may inadvertently install software that negatively affects your sy stem and is impossible to uninstall, or make a mistake in critical operating system setti ngs that can take hours to repair.
- 31 - 5. Troubleshooting Although your computer system is designed to provide you with trouble-free operation, any system can malfunction. Incorrectly setting up or configuring your system during hardware or operating system upgrades is the cause of most malfunctions.
- 32 - Operating System Tools Windows XP, Windows 98, Windows ME, Windows NT 4.0 and Windows 2000 Professional all include a variety of tools that can be of great help in troubleshooting problems. Simply searching for a particular topic in the Help system of Windows can yield a lot of information about the problem.
- 33 - This procedure requires you to work inside your computer. Please perform the steps listed in the WARNING at the beginning of this chapter before you proceed. 1. After performing the steps listed in the WARNING at the beginning of this chapter, remove the case (see “Opening Your Computer Case,” page 6-10).
- 34 - 3. Adjust your monitor's br ightness and contrast controls. 4. Ensure that the video cable is properly connected to the video port at the back of the computer. 5. Remove the cover (see “Opening Your Computer Case,” page 6-10) and ensure all cards, cables, and components are properly seated or connected.
- 35 - 5. Run BIOS Setup to verify that the driv e is defined correctly. Refer to the motherboard User Manual for instructions on running BIOS Setup. CD-ROM, CD-RW, DVD-ROM, DVD- RAM & CD-RW/DVD C.
- 36 - check both the System and Multimedia in Control Panel to ensure that you have the proper settings for your sound card (consul t your sound card/audio subsystem manual and your Windows documentation). Check your software to verify that the volume settings are not turned off.
- 37 - system. Windows recognizes a standard PS/2 or Serial mouse and installs generic drivers. If this solves the problem, then t here is a conflict between the mouse software and some other program or hardware in the system. Call CTL Technical Support for help.
- 38 - 3. In Windows, open the Control Panel and select Modem/Diagnostic . Select the modem's COM port, and then click More Info . Make sure Windows reports the correct modem information. Refer to your m odem and Windows documentation for further information.
- 39 - 9. Windows will boot without installing any spec ific drivers. Once in Windows, remove and then re-install the offending driver(s). The procedure for Windows ME is similar to the procedure outlined above, except the Command Prompt or Safe Command Prompt Only options have been removed.
- 40 - 5. After the process of installing from the Qu ick Restore CD is completed, the computer will reboot automatically. At this point, you need to either remove the Quick Restore CD from the CD Dri.
- 41 - Phillips screwdriver. Note: Only three screws must be removed to open the case. Step 2: Gently slide the cover straight back..
- 42 - Index A AC3 Out, 15 Advanced Power Management, 28 audio port, 14 troubleshooting, 35,36 B backup devices, 24 backups data, 30 system restore, 32 C CD-ROM disk loading a disk, 22 manual ejection.
- 43 - troubleshooting, 34 use, 21 G game port, 14, 15 grounding electrical outlets, 12 H hard drive defragmentation, 21 maintenance, 21 troubleshooting, 31, 32, 33 J joystick, 14,15 K keyboard ergono.
- 44 - power button, 20 power management, 19, 20 printer connecting, 14, 16 Q quick restore CD use of, 39, 40 R reset button, 19, 21 restart restart procedure, 19 emergency restart procedure, 19 S S V.
An important point after buying a device Computer Tech Link Valeo (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Computer Tech Link Valeo yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Computer Tech Link Valeo - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Computer Tech Link Valeo you will learn all the available features of the product, as well as information on its operation. The information that you get Computer Tech Link Valeo will certainly help you make a decision on the purchase.
If you already are a holder of Computer Tech Link Valeo, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Computer Tech Link Valeo.
However, one of the most important roles played by the user manual is to help in solving problems with Computer Tech Link Valeo. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Computer Tech Link Valeo along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
