Instruction/ maintenance manual of the product RLRB-A Connerton Co
Go to page of 4
Fine Cooking Equipment For Over 70 Y ears 1. Preparation For Installation: Safe and satisfactory operation of the broiler depends, to a great extent, upon it’s proper installation. It should be installed in accordance with the National Fuel Gas Code Z223.
2. Clearances And Ventilation: This broiler is designed for installation in non-combustible locations with 0 inch clearance from sides and back. Keep equipment area free and clear from combustibles. The area in front of, and above the broiler must be clear to avoid obstruction of flow of combustion and ventilation air.
RLRB-A BUDGET SERIES CHAR BROILERS 1. 65-400-xx Body 9. 00-675-00 Air Shutter 2. 60-475-xx Firebox 10. 60-125-00 Radiant 3. 60-425-xx Front Panel 11. 60-350-00 Pilot w/tubing 4. 65-450-xx Grease Pan 12. 60-300-xx Gas Manifold 5. 60-100-02 Waffle Grate 13.
Condition Probable Cause Solution Small/no burner flame Regulator failure Unplug regulator vent hole or replace regulator. Plugged orifice hood Unplug hole or replace orifice. Plugged burner port Unplug burner port(s). Small/no pilot flame Pilot valve setting Adjust flame height.
An important point after buying a device Connerton Co RLRB-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Connerton Co RLRB-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Connerton Co RLRB-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Connerton Co RLRB-A you will learn all the available features of the product, as well as information on its operation. The information that you get Connerton Co RLRB-A will certainly help you make a decision on the purchase.
If you already are a holder of Connerton Co RLRB-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Connerton Co RLRB-A.
However, one of the most important roles played by the user manual is to help in solving problems with Connerton Co RLRB-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Connerton Co RLRB-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
