Instruction/ maintenance manual of the product 973.111430 Craftsman
Go to page of 14
10/03/01 WED 13:43 FAX 864 064 3314 RYOBI CUSTOMER SERVICE _002/015 Owner's Manual 318 in., 16.8 VOLT CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 973.111430 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
10/03/01 WED 13:44 FAZ 864 964 3314 RYOBI CUSTOMER SERVICE _003/O15 • Warranty ....................................................................................................................................... 2 • Introduction and Product Specifications .
10/03/01 WED 13:44 FAX 884 964 3314 RYOBI CUSTOMER SERVICE [_004/015 The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them,.
10/03/01 WED 13:44 FAX 864 964 3314 RYOBI CUSTOMER SERVICE _005/015 RULES FOR SAFE OPERATION (Continued) II NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite flam- mable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE.
10/03/01 _ED 13:45 FAX 864 964 3314 RYOBI ¢UST0_[ER SERVICE _006/015 RULES FOR SAFE OPERATION (Continued) • An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a dsk of fire and electric shock.
10/03/01 WED 13:45 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_007/O15 The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnits Power Bit Set II High Speed Bits (FOrWood or Metal)..3/4 in. Max.
10/O3/O1 WED 13:45 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_008/015 tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. & o a careless fraction of a second is sufficient to inflict severe injury.
to/03io1 WED 13:45 FAX 864 964 3314 RYOBI OUSTO_R SERVICE _oo9/o15 SWITCH See Figure 2. To turn your ddll ON. depress the switchtrigger. To turn it OFF, release the switchtrigger. SELECTOR Fig. 2 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increasedtrigger pressure.
10/03/01 WED 13:46 FAX 884 084 3314 RYOBI CUST0_ER SERVICE _010/015 SWITCH LOCK See Figure 5.. The switch trigger can be locked In the OFF position. This feature can be used to prevent the poasibNity of accidental sta_lng when not in use. To lock switch trigger, place the direction of rotation selector in center position.
10103101 WED 13:46 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_011/015 INSTALLING BITS See FTgure 7.. • Lock the switch trigger by placing the directionof rotation selector in center position. See Figure 5. • Open or close chuck jaws to a pointwhere the opening is slightly larger than the bit size you Intend to use.
10/03/01 WED 13:46 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_012/015 Note: Remember the two-speed feature (RI-LO) when setting torque. The amount of torque will vary depend- ing on which speed se_ng you have your drill-driver, Switching to LO speed will increase torque.
10/03!01 WED 13:47 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_013/015 CHUCK REMOVAL Gee Figures f3, 14, and 15. The chuck must be removed in order to use some accessories, To remove: II Lock the switch trigger by placing the directionof rotation selector,in center position.
10103/01 WED 13:47 FAX 864 964 .3314 RYOBI CUSTOMER SERVICE [_]014/015 part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastice are susceptible to damage from various types of commercial solvents and may be damaged by their use.
10/03/01 WED 13:47 FAX 864 964 3314 RYOBI CUSTOMER SERVICE _015/015 .---- CRAFTSMAN 3/8 In,, 16.8 VOLT CORDLESS DRILL-DRIVER- MODEL NO, 973.111430 _- The model number will be found on a plate attached to the motor housing. Always mention the model number in ell correspondence regarding your 3/8 in.
An important point after buying a device Craftsman 973.111430 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 973.111430 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 973.111430 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 973.111430 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 973.111430 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 973.111430, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 973.111430.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 973.111430. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 973.111430 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center