Instruction/ maintenance manual of the product CR56 1950's Payphone Crosley
Go to page of 2
USE THIS TEMPLATE TO DETERMINE THE POSITION OF TELEPHONE ON WALL, AND WHERE TO LOCATE SCREW HOLES. REMOVE TEMPLATE FROM WALL BEFORE INSERTING PLASTIC ANCHORS OR SCREWS USE ONLY FOR WALL INSTALLATION O.
SET UP DIAL MODE Locate the DIAL MODE switch on the rear of the telephone body . Slide the switch to T ONE unless you have Dial-Pulse (R otary) telephone service in your area in which case, slide the switch to the PULSE position.
An important point after buying a device Crosley CR56 1950's Payphone (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crosley CR56 1950's Payphone yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crosley CR56 1950's Payphone - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crosley CR56 1950's Payphone you will learn all the available features of the product, as well as information on its operation. The information that you get Crosley CR56 1950's Payphone will certainly help you make a decision on the purchase.
If you already are a holder of Crosley CR56 1950's Payphone, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crosley CR56 1950's Payphone.
However, one of the most important roles played by the user manual is to help in solving problems with Crosley CR56 1950's Payphone. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crosley CR56 1950's Payphone along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
