Instruction/ maintenance manual of the product VoomPC-2 Curtis Computer
Go to page of 6
VoomPC-2™ Automotive PC Enclosure Mini-ITX Car PC Enclosure Installation Guide Version 1.0 P/N VOOM-PC-2-ENC Before you start….
http:// www.cartft.com , Cool Embedded PCs Please take a moment and read this manual before you install the VoomPC- 2™ in your vehicle. Often times, rushing into unit installation can result in serious damage to your motherboard, power supply and probably your car’s electrical system.
http:// www.cartft.com , Cool Embedded PCs 1.0 Introduction Thank you for purchasing the VoomPC-2 mini-ITX vehicle enclosure! The VoomPC-2 was designed to work with a wide variety of main boards such as the VIA mini-ITX boards as well as low power Pentium-M OR Core 2 Duo.
http:// www.cartft.com , Cool Embedded PCs Figure 1.0, bottom mounting plate 3.0 VoomPC-2 installation steps 1) Install the motherboard, Front Audio / USB board and Power S upply on the base plate using M3 screws. ( See figure 1.0 ) 2) Connect the ATX cable harness provided with your power supply to the motherboar d.
http:// www.cartft.com , Cool Embedded PCs 7) Install the HDD and CDROM (optional) into the metal bracket and connect to the motherboard using the IDE cable. 8) Install the motherboard I/O shield at the back of the VoomPC- 2 enclosures Figure 1.1, bottom mounting plate 9) Your final assembly should look similar to Figure 1.
http:// www.cartft.com , Cool Embedded PCs 4.0 Power Connector Wiring Diagram Figure 1.3, power connector diagram Connector type is Molex “mini-fit JR” series, 2 x 4 configuration. Consult www.molex.com for additional information on housings and mating pins (male/female).
An important point after buying a device Curtis Computer VoomPC-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Curtis Computer VoomPC-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Curtis Computer VoomPC-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Curtis Computer VoomPC-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Curtis Computer VoomPC-2 will certainly help you make a decision on the purchase.
If you already are a holder of Curtis Computer VoomPC-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Curtis Computer VoomPC-2.
However, one of the most important roles played by the user manual is to help in solving problems with Curtis Computer VoomPC-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Curtis Computer VoomPC-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
