Instruction/ maintenance manual of the product UIW64A Definitive Technology
Go to page of 8
Congratulations Congratulations on your purchase of Definitive T echnology Ultimate In-W all Series Loudspeakers. These reference quality loudspeakers provide the highest level of sonic performance and construction quality and are designed for easy flush mount installation in walls and ceilings of homes and commercial spaces.
The Ultimate In-W alls have been voiced by Definitive engineers (using the superb facilities of the National Research Council) to the same high-end standards as all Definitive loudspeakers.
Please Inspect For Shipping Damage Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely will have occurred in handling after it left the plant and should be reported at once to your Definitive deal- er or the delivery company that delivered your loudspeakers.
Planning for Installation Please allow a minimum of two inches of clearance in all directions behind the wallboard for your speakers. Lateral clearance should not be an issue as all models of Ultimate In-W all Loudspeakers are narrow enough to fit between wall studs.
Step by Step Installation The included template is the exact size of the required speaker opening. Once you have decided on a general location for your speaker , hold the template in the preferred position on the wall or ceiling and trace around it taking care that the opening is level.
Service and warranty work on your Definitive loudspeakers will nor - mally be performed by your local Definitive T echnology dealer . If, how- ever , you wish to return the speaker to us, please contact us first, describ- ing the problem and requesting authorization as well as the location of the nearest factory service center .
In-W all Loudspeaker Specifications UIW 55 Outer Dimensions 6.687" x 10.375" (170 mm x 263 mm) Cut-out Size 5.57" x 9.25" (142 mm x 235 mm) Power Rec. Assoc. Amp. 10 – 175 watts per channel F requency Response 3 5 Hz – 30 kHz Nominal Impedance 8 ohms Driver Complement 5.
This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly .
An important point after buying a device Definitive Technology UIW64A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Definitive Technology UIW64A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Definitive Technology UIW64A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Definitive Technology UIW64A you will learn all the available features of the product, as well as information on its operation. The information that you get Definitive Technology UIW64A will certainly help you make a decision on the purchase.
If you already are a holder of Definitive Technology UIW64A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Definitive Technology UIW64A.
However, one of the most important roles played by the user manual is to help in solving problems with Definitive Technology UIW64A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Definitive Technology UIW64A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
