Instruction/ maintenance manual of the product E190SB Dell
Go to page of 29
Dell™E170S/E190SFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page AboutYourMonitor Dell™E170S/E190SFlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Parts .
Product Features The E170S/E190S flat panel display has an active matrix, thin - film transistor (TFT), and liquid crystal display (LCD). The monitor features include: ■ E170S: 17 - inch (432.7 mm) viewable area display. 1280 x 1024 resolution, plus full - screen support for lower resolutions.
Side View Backview Label Description/Use 1 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
Bottom View Bottom view Monitor Specifications Power Management Modes IfyouhaveVESA'sDPMS™compliancedisplaycardorsoftwareinstalledinyourcomputer,themonitorcanautomaticallyreduceitspowerconsumptionwhen not in use.
E190S Pin Assignments VGA Connector Flat Panel Specifications Switch off - - - Off Less than 0.5 W VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal opera.
* E170S/E190S Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%). Resolution Preset Display Modes E170S/E190S Electrical Panel type TN TN Screen dimensions 17 inches (17 - inch viewable image size) 19 inches (19 - inch viewable image size) Preset display area: Horizontal Vertical 337.
Physical Characteristics Environmental Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system wit.
the user can select different settings, but in most cases monitor installation is automatic. LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state.
Back to Contents Page Appendix Dell™E170S/E190SFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Safety Information that ships with your monitor.
Back to Contents Page Setting Up Your Monitor Dell™E170S/E190SFlatPanelMonitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™E170S/E190SFlatPanelMonitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™E170S/E190SFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Me.
Direct - Access Functions Using the On - Screen Display (OSD) Menu Accessing the Menu System 1. With the menu off, press the MENU button to open the OSD system and display the main features menu. 2. Press the - and + buttons to move between the function icons.
EXIT This is used to exit out of the Main Menu. Positioning: Horizontal Vertical 'Positioning' moves the viewing area around on the monitor screen. When making changes to either the Horizontal or Vertical settings, no changes occur to the size of the viewing area; the image gets shifted based on what you select.
Color Settings: Adjusts the color temperature and saturation. Normal Preset (sRGB) Selected to obtain the default (factory) color settings. Blue Preset This color setting gives a bluish tint and is used for text - based applications such as spreadsheets, programming, text editors, and so on.
NOTE : The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Factory Reset: Factory Reset returns the settings to the factory preset values for the selected group of functions. Exit is used to exit out of Factory Reset menu.
OSD Warning Messages A warning message may appear on the screen indicating that the monitor is out of sync. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
¡ Go to the support site for your computer and download the latest graphic drivers. ¡ Go to your graphics card website and download the latest graphic drivers. Using the Dell Soundbar (Optional) TheDellSoundbarisastereotwochannelsystemmountableonDellflatpaneldisplays.
Back to Contents Page NOTE: The stand is detached when the monitor is shipped from the factory..
Back to Contents Page Setting Up Your Monitor Dell™E170S/E190SFlatPanelMonitor Important instructions to set the display resolution to 1280x1024 (Maximum) For optimal display perf.
Dell™E170S/E190SFlatPanelMonitor Information in this document is subject to change without notice. © 2009 DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™E170S/E190SFlatPanelMonitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (Optional) Removing the Stand Attaching the Stand Remove the monitor cover and place the monitor on it.
1. Plugthepowercablesforyourcomputerandmonitorintoanearbyoutlet. 2. Turn on the monitor and the computer. If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems .
Back to Contents Page NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
Back to Contents Page Solving Problems Dell™E170S/E190SFlatPanelMonitorUser'sGuide Self - Test Built - in Diagnostics Common Problems Produc.
4. Carefully inspect the screen for abnormalities. 5. Press the + (button 3) key on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.
Product - Specific Problems TroubleshootingtheDell™Soundbar(Optional) l Perform monitor Self Test Feature Check and determine if these lines are also in self l Check for bent or broken pins in the video cable connector. Synchronization Problems Screen is scrambled or appears torn l Reset the monitor to Factory Settings.
Back to Contents Page l Test the Soundbar using another audio source (i.e., portable CD player). Distorted Sound Other audio source is used. l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line - in plug is completely inserted into the jack of the audio source.
An important point after buying a device Dell E190SB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E190SB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E190SB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E190SB you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E190SB will certainly help you make a decision on the purchase.
If you already are a holder of Dell E190SB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E190SB.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E190SB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E190SB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
