Instruction/ maintenance manual of the product DT2400CS Delta
Go to page of 24
INSTRU CTIO N M ANU AL P ART NO. D27918 Rev . 1 Copyright © 2003 Delta Machinery ESP AÑOL: PÁGINA 25 FRANÇAIS: P AGE 49 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-866-422-4286 5.
2- ENG D27918 T ABLE OF CONTENTS SAFETY GUIDELINE/DEFINITIONS .......2 CONSUMER SAFTEY INFORMA TION ...2 IMPORT ANT SAFETY INSTRUCTIONS ...................................3-6 CONSUMER GENERAL AND SERVICE INFORMA TION ..................................
3- ENG D27918 IMPORT ANT SAFETY INSTRUCTIONS Read Operation Manual. Do not operate equipment until you have read Operation Manual for Safety , Assembly , Operation, and Maintenance Instructions.
4- ENG D27918 • Fuel or oil can leak or spill and could result in fir e or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other surfaces in vehicles or trailers.
5- ENG D27918 • Reactive force of spray will cause gun/wand to move, and could cause the operator to slip or fall, or misdirect the spray . Improper contr ol of gun/wand can result in injuries to self and others. • Do not overreach or stand on an unstable support.
6- ENG D27918 The powerful spray from your pr essure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto stripping and trim, and delicate objects such as flowers and shrubs.
7- ENG D27918 Handle Bagged Parts Nozzle Cleaning Kit English/ Spanish/ French Operation Manual High Pressure Hose Engine Oil Spray Gun Multi-Adjustable Spray W and Knobs Saddle Bolts Engine Manual Ac.
8- ENG D27918 3. Connect wand to gun. Tighten securely . 2. Place handle assembly onto frame and connect handle to frame. NOTE: Knobs are assembled to the outside of frame. ASSEMBL Y INSTRUCTIONS 1. Remove cleaning solution tanks from frame assembly .
9- ENG D27918 c. Place grooves in accessories panel assembly onto scr ews and slide panel assembly into place. d. Place scr ews (removed earlier) into the top holes and secure accessories panel assembly to handles. Do not overtighten. Screws 4. Attach high pressur e hose to gun.
10- ENG D27918 6. Reinstall cleaning solution tanks. Tilt cleaning solution tanks toward engine, slide onto handles, and snap into place. 7. Attach cleaning solution hose to barb fitting on control valve located at the rear of unit. 8. Add engine oil (supplied) to engine.
11- ENG D27918 OPERA TING INSTRUCTIONS BASIC ELEMENTS OF A PRESSURE WASHER High Pressur e Pump (located inside the shroud) : Increases the pr essure of the water supply . Engine: Drives the high pressur e pump. High Pressur e Hose: Carries the pressurized water from the pump to the gun and wand.
12- ENG D27918 BASIC ELEMENTS OF ENGINE Refer to the engine manual for location and operation of engine controls. Choke Control: Opens and closes carbur etor choke valve Throttle Contr ol Lever: Controls engine speed. Fuel V alve Lever : Opens/closes connection between fuel tank and carburetor .
13- ENG D27918 HOW TO USE SPRA Y WAND: Y our pr essure washer is equipped with a multi-adjustable spray wand with both high and low pressur e settings. The high pressure setting is for cleaning and rinsing, the low pressur e setting is for applying cleaning solutions to surfaces.
14- ENG D27918 HOW TO USE THE DUAL T ANK CLEANING SYSTEM NOTE: Use only soaps and cleaning solutions designed for pressur e washer use. Do not use bleach. T o apply cleaning solutions: 1. Make sur e cleaning solution tanks are assembled and all hoses are connected.
15- ENG D27918 READ AND UNDERST AND ALL WARNINGS BEFORE ST ARTING UNIT When using the high pr essur e setting, DO NOT allow the high pressur e spray to come in contact with unprotected skin, eyes, or with any pets or animals. Serious injury can occur .
16- ENG D27918 4. Connect water source to pump inlet. NOTE: W ater source must provide a minimum of 5 gallons per minute at 20 p.s.i. 5. Connect high pressur e hose to pump outlet. 6. If applying a cleaning solution , see How T o Use the Dual Cleaning Solution System in Operation section of this manual.
d. Before r econnecting cleaning solution hose to chemical injector barb fitting make sure that any r emaining cleaning solution has been completely drained from the cleaning solution hose. T o rinse chemical using cleaning solution system tank a. T ur n control valve knob arr ow to the down (off) position.
18- ENG D27918 1. Shut of f the pressure washer and turn off the water supply . 2. Disconnect spark plug wir e to insure the unit will not start while performing maintenance. 3. Pull trigger on gun handle to r elieve any water pressure. 4. Disconnect the wand fr om the gun.
19- ENG D27918 ENGINE Consult the Engine Owners Manual for the manufacturer's r ecommendations for storage. PUMP 1. Drain all water from high pr essure hose , coil it, and store it in cradle of the pressur e washer handle.
20- ENG D27918 DUAL T ANK CLEANING SYSTEM 1. T urn control valve knob to the down (off) position. 2. Remove cleaning solution hose at chemical injector and pull thr ough rear shroud. 3. Place end of cleaning solution hose into a suitable container to drain cleaning solution.
21- ENG D27918 TROUBLE SHOOTING GUIDE PROBLEM Engine will not start (see Engine Manual for further engine troubleshooting) No or low pressur e (initial use) CAUSE CORRECTION No fuel. Add Fuel. Pressur e builds up after two pulls on the recoil starter or after initial use.
22- ENG D27918 W ater leaking at pump W ater leaking at gun/wand connection No or low pressur e (after period of normal use) PROBLEM CAUSE CORRECTION W and not in low pressure. See How to Use W and paragraph in the Operation Section. Screen on end of chemical injector rinsing hose not in water Clean filter .
23- ENG D27918 NOTES.
24- ENG D27918 D27918 W ARRANTY DEL T A MACHINERY warrants to the original purchaser that all pr oducts covered under this warranty are free from defects in material and workmanship.
An important point after buying a device Delta DT2400CS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta DT2400CS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta DT2400CS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta DT2400CS you will learn all the available features of the product, as well as information on its operation. The information that you get Delta DT2400CS will certainly help you make a decision on the purchase.
If you already are a holder of Delta DT2400CS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta DT2400CS.
However, one of the most important roles played by the user manual is to help in solving problems with Delta DT2400CS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta DT2400CS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center