Instruction/ maintenance manual of the product Network Device 206-412-06 Dialogic
Go to page of 10
Proprietary Extension for COMMON-ISDN-API Version 2.0 Extension for Fax Paper Formats and Resolutions October 2007 Dialogic Corporation.
2 COPYRIGHT NOTICE AND LEGAL DISCLAIMER Sixth Edition (October 2007) 206-412-06 Copyright © 1998-2007 Dialogic Corporat ion. You may not reproduce this document in whole or in part without permission in writing from Dialogic Corporation at the address provided below.
3 Motivation: The current COMMON-ISDN-API specification defines paper formats ISO A4, ISO B4 and ISO A3 at standa rd resolution (R8 x 3.85) and high resolution (R8 x 7.
4 4.2.2.7 CAPI_GET_PROFILE Applications call CAPI_GET_PROFILE to re trieve capability information from COMMON-ISDN-API . COMMON-ISDN-API copies information about implemented feat ures, the total number of controllers, and protocols supported by the requested controller to a 64-byte buffer passed by the calling application.
5 4 bytes B3 protocol support (bit field): [0]: Transparent, always set [1]: T.90NL with compatibility to T.70NL in accordance to T.90 Appendix II. [2]: ISO 8208 (X.25 DTE-DTE) [3]: X.25 DCE [4]: T.30 for fax group 3 [5]: T.30 for fax group 3 with extensions [6]: reserved [7]: Modem [8].
6 Manu ID (dword) The purpose of the parameter Manu ID is to communicate a dword which identifies the manufacturer in MANUFACTURER messages. Every manufacturer supplying MANU- FACTURER messages should choose a unique valu e (such as an abbreviation of the company name).
7 Manufacturer Command The purpose of the parameter manufacturer command is to specify the kind of operation requested in a MANUFACTURER_REQ. The following manufacturer commands are defined: 1: Assign.
8 A NNEX B (N ORMATIVE ): SFF F ORMAT B.1 Introduction SFF ( S tructured F ax F ile) is a representation specific to fax group 3 documents. As shown below in Fiugre 6 it consists of in formation concerning the page structure and compressed line data of the fax document.
9 B.2.2 Page header Parameter Type Comment PageHeaderID byte 254 (Page data record type) PageHeaderLen byte 0: Document end 1...255 : byte offset of first page data from the Resolution Vertical field of the page header.
10 Line Length word Number of pixels per line 1728: standard fax G3 2048: B4 (optional) 2432: A3 (optional) Support for additional v alues is optional for COMMON- ISDN-API If FAX paper formats and resolutions are enabled 1728: ISO A4 at R8 x 3.85, R8 x 7.
An important point after buying a device Dialogic Network Device 206-412-06 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dialogic Network Device 206-412-06 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dialogic Network Device 206-412-06 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dialogic Network Device 206-412-06 you will learn all the available features of the product, as well as information on its operation. The information that you get Dialogic Network Device 206-412-06 will certainly help you make a decision on the purchase.
If you already are a holder of Dialogic Network Device 206-412-06, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dialogic Network Device 206-412-06.
However, one of the most important roles played by the user manual is to help in solving problems with Dialogic Network Device 206-412-06. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dialogic Network Device 206-412-06 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
