Instruction/ maintenance manual of the product HT400IW Directed Electronics
Go to page of 10
analog and digital systems HT300iw HT400iw HT800iw owner's manual.
table of contents introduction 1 cautions 1 features 1-2 installation precautions and tips 3 general mounting suggestions 3 prewiring 3 preparing the wall or ceiling cutout 4 final installation 4-5 cu.
high frequency contour switch A 3-position switch located on the tweeter plate serves as a high frequency contour contr ol. The upper position offers a “normal” r esponse suitable for most applications. The bottom position provides the most output and is recommended for of f-axis listening or if the speakers are mounted very high.
installation pr ecautions and tips Please read these instructions completely for the best enjoyment of your HT Series speakers. When you cut into the wall to install the speaker , do not cut through the facing or insulation that may be behind the wall.
pr eparing the wall or ceiling cutout Confirm there is at least 1" between the final cutout and nearby studs or joints for positioning mounting hardwar e. T emporarily fasten the stiff paper template (supplied) to the wall with thumbtacks. Carefully trace around the perimeter with a pencil.
7. Insert the speaker assembly on an angle so that one of the mounting brackets enters the opening first. (fig. 1) fig1 8. T urn the speaker toward the wall so that the other mounting bracket enters the mounting hole and the speaker is seated on the wall.
r emoving the grille Should it be necessary to remove the grille, insert an awl or other pointed tool into a grille hole near the corner . Gently lift the grille out of the speaker frame. Repeat this procedure at each corner of the grille, gradually lifting the corners of the grille until it is removed.
specifications HT300iw HT400iw HT800iw Mounting hole 6 3/8" x 9 1/8" 6 3/8" x 14 7/8" 6 3/8” x 26 1/2" Depth from fr ont of wall 3 1/4" 3 1/4" 3 1/4" Overall .
warranty information LIMITED TWO YEAR CONSUMER W ARRANTY Directed Electr onics, Inc. promises to the original purchaser , to replace this pr oduct should it prove to be defective in workmanship or mat.
a Directed Electronics, Inc. All rights reserved G39556/61/71 10-02.
An important point after buying a device Directed Electronics HT400IW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Directed Electronics HT400IW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Directed Electronics HT400IW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Directed Electronics HT400IW you will learn all the available features of the product, as well as information on its operation. The information that you get Directed Electronics HT400IW will certainly help you make a decision on the purchase.
If you already are a holder of Directed Electronics HT400IW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Directed Electronics HT400IW.
However, one of the most important roles played by the user manual is to help in solving problems with Directed Electronics HT400IW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Directed Electronics HT400IW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
