Instruction/ maintenance manual of the product XDVD270 Dual
Go to page of 24
OWNER ’ S MANUAL Mobile DVD Player with two 7" TFT LCD Monitors XDVD270.
2 XDVD270 PREPARATION Table of Contents 2 3 4-5 6 7 8 9 10 11 12-14 15-17 18 19 20 21 22 DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software products. As this player plays discs according to their intentions, some functions may not work as intended by you.
Please carefully unpack both units, and inspect all contents. The XDVD270 includes the following items: 3 XDVD270 PREPARATION Package Contents Remote Control x 1 Coin Battery x 1 AC Adapter x 1 DC Ada.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1. Read All Instructions - All safety and operating instructions should be read before attempting to operate this product.
1. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
6 12 2 3 4 5 1 Left Speaker Chapter/Track Down Pause Display LCD On/Off Right Speaker IR Sensor 1 2 3 4 5 6 7 Chapter/Track Up Play Stop Power On/Off Open Key Lock On/Off A/V Internal/External 8 9 10 .
Control Locations - External Monitor 7 XDVD270 OPERATION Media Storage Tray Left Speaker Right Speaker Main Unit Connection A/V Internal/External 1 2 3 4 5 Video In Audio In Headphone Out Volume 6 7 8.
8 1 2 4 6 8 10 12 14 16 18 20 21 19 3 5 7 9 11 13 15 17 Power Display Title Zoom Search Slow Audio 4-Way - Up Menu Enter 4-Way - Left 4-Way - Down Cancel 1 2 3 4 5 6 7 8 9 10 11 12 13 Key #2 Key #1 Ke.
1. Connecting the Main Unit to the External Monitor Note: Power off the XDVD270 main unit and any other A/V equipment before connecting the XDVD270 external monitor or making any external Audio or Video connections. Connect the gray end of the supplied communication cable to the right side of the main unit.
Connections - External Audio/Video 10 XDVD270 OPERATION The A/V INT EXT switch selects between internal and external audio/video sources. Select A/V INT on the main unit and A/V INT on the external monitor to watch a DVD playing in the main unit on both monitors.
XDVD270 OPERATION Quick-Start Guide 11 Slide the OPEN button to the right and gently lift the lid. The lid opens to a maximum 90 degrees. Do not open it any further - as severe damage to the unit may occur. Align the center of the disc with the center of the spindle guide.
12 XDVD270 OPERATION General Operation - DVD Setup Menu Using the remote, press SETUP to access DVD setup menu. Press or to select between menu pages and / / / to adjust settings and or levels. When selectable, the menu item will be highlighted in yellow.
13 XDVD270 OPERATION General Operation - DVD Setup Menu Press or to select Audio Setup Page and ENTER to select. Press or to select Speaker Setup Page and ENTER to select. Press or to select LT/RT or Stereo . Press or to select Audio Setup and ENTER to select.
14 XDVD270 OPERATION General Operation - DVD Setup Menu Press or to select Preference Page and ENTER to select. Note: The DVD must be fully stopped before the Preference Page can be accessed. See page 15 for details. Press or to select English, French, German, Spanish, Portuguese, Italian, Danish or Swedish .
15 XDVD270 OPERATION General Operation - DVD Open lid; insert disc making sure it snaps securely on the spindle mount. Close lid. Press POWER on the main unit for more than 2 seconds to turn the unit on. When the unit is on, press POWER for more than 2 seconds to turn the unit off.
XDVD270 OPERATION General Operation - DVD Press I or I from the main unit for more than 2 seconds to fast forward or fast reverse in 2x; 4x; 8x; 16x; 32x modes. Press PLAY to cancel fast forward or fast reverse. Press or from the remote control to fast forward or fast reverse in 2x; 4x; 8x; 16x; 32x modes.
17 XDVD270 OPERATION General Operation - DVD Press AUDIO while playing to switch between available languages. Press SUBTITLE while playing to switch between available subtitle languages. Press ANGLE while playing to switch between available viewing angles.
XDVD270 OPERATION General Operation - CD In general, audio discs will play automatically when inserted or the power is turned on. Press STOP momentarily. The unit will return to the start- up logo and display “Press Play Key To Continue”. If PLAY is pressed, the unit will resume operation from the last position in memory.
Close top, making sure that Velcro® closure fits snugly. Loop both belts through buckles. Slip main unit and/or external monitor into either side of the car mount. Place both belts over headrest; position unit so that screen is at comfortable viewing level, then tighten belts.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from def.
21 XDVD270 OPERATION Troubleshooting Problem Action Unit will not turn on (no power) Connect the AC adapter into the wall outlet securely. Connect the DC adapter into the vehicle cigarette outlet securely. Press the POWER button on the main unit for more than 2 seconds.
XDVD270 OPERATION Specifications Signal-to-noise: >94db Dynamic range: >95db Harmonic distortion: <0.008% Frequency response: 10Hz-20kHz Channel separation @1kHz: >68dB D/A converter: 24 Bit Sampling frequencies: 44.1kHz, 48kHz, 96kHz Electronic Shock Protection: 3 seconds (DVD) 20 seconds (CD) Panel size: 7 ” (177.
23 XDVD270 OPERATION Notes Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
www.dualav.com ©2005 Dual Electronics Corp. NSA0805-V01.
An important point after buying a device Dual XDVD270 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dual XDVD270 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dual XDVD270 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dual XDVD270 you will learn all the available features of the product, as well as information on its operation. The information that you get Dual XDVD270 will certainly help you make a decision on the purchase.
If you already are a holder of Dual XDVD270, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dual XDVD270.
However, one of the most important roles played by the user manual is to help in solving problems with Dual XDVD270. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dual XDVD270 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
