Instruction/ maintenance manual of the product 400 RPM Dynabrade
Go to page of 4
Models: 13400 – 3,400 RPM 13410 – 3,400 V ersatility Kit 13411 – 3,400 V ersatility Kit Air Motor and Machine P ar ts P ar ts P age Reorder No. PD01•40 Eff ective April, 2001 Supersedes PD98•17 .
Impor tant Operating, Maintenance and Safety Instructions Carefully read all instructions before operating or servicing any Dynabrade ® Abrasive Power T ool. W arning: Hand, wrist and arm injury may result from repetitive work motion and overexposure to vibration.
Disassembly / Assembly Instructions - Dynisher Important: Manufacturer ’ s warranty is void if tool is disassembled before warranty expires. Please refer to parts breakdown for part identification. Motor Disassembl y: 1. Disconnect tool from power source.
Dynaswivel ® Swivels 360° at two locations which allows an air hose to drop straight to the floor , no matter how the tool is held. Note: For proper connection to a 1/4" NPT thread a reducing bushing is required. • 95461 3/8" NPT . 96234 Motor T une-Up Kit • Includes assorted parts to help maintain and repair motor .
An important point after buying a device Dynabrade 400 RPM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynabrade 400 RPM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynabrade 400 RPM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynabrade 400 RPM you will learn all the available features of the product, as well as information on its operation. The information that you get Dynabrade 400 RPM will certainly help you make a decision on the purchase.
If you already are a holder of Dynabrade 400 RPM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynabrade 400 RPM.
However, one of the most important roles played by the user manual is to help in solving problems with Dynabrade 400 RPM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynabrade 400 RPM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
