Instruction/ maintenance manual of the product T2000WD/1 Earthquake Sound
Go to page of 8
Earthquake Sound reserves the right to amend details of the specifications without notice. Copyright © Earthquake Sound Corporation Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • T el 510-732-1000 TNT Series Amplifiers Owners Manual T500W/2 T1000W/2 T2000W/4 T2000WD/1 TD5X MODELS: Sound That Will Move Y ou.
Our Thank Y ou................................................................................ Cautions and Advisories................................................................. Signal Sensing Feature.............................................
4 5 SPECIFICA TIONS Model T500W/2 T1000W/2 T2000W/4 T2000WD/1 TD5X Class A/B A/B A/B D D Number of Channels 2 2 4 1 Mono 4 Full Range + 1 Mono Max Power Output 800 W atts 1400 W atts 2000 W atts 2000 .
6 7 T500W/2 Set Xover switch to FULL K-10, ten-inch bass tube, in mono application (4 Ohms minimum) 7.0V 17.0V 4.0V 10.0V 2.5V 5.0V 1V 1V The gain knob is not a volume control. It is designed to match the input level of the amp to the output level of the source unit.
8 9 T1000W/2 Set Xover switch to FULL K-10, ten-inch bass tube, in mono application (4 Ohms minimum) T wo 25A fuses T o car chassis / ground T o remote turn on / trigger T o battery positive (+) Bridgeable Speaker outputs, minimum 4-Ohms mono. 7.0V 17.
10 1 1 T2000W/4 Bridgeable Speaker outputs, minimum 4-Ohms mono. Set Xover switch to FULL K-10, ten-inch bass tube, in mono application (4 Ohms minimum) CH3 CH4 CH3 CH4 CH1 CH2 CH1 CH2 T o car chassis / ground T o remote turn on / trigger T o battery positive (+) T wo 20A fuses 7.
12 13 T2000WD/1 SUBSONIC FIL TER: For the vast majority of vehicles, peaks or dips occur at about 40Hz – around the frequency of a low bass guitar note. U s e t h i s c o n t r o l t o correct that peak or dip. PHASE SHIFT : This 0 - 180° phase shift adjustment is for reversing the phase output with respect to its input.
OUTPUT CH2+ CH2- CH2+ CH4+ CH5- CH2- CH4- CH5+ CH2- CH4- FRONT BRIDGED BRIDGED CH1- CH1+ CH1- CH3- CH1+ CH3+ CH1+ CH3+ SUB - + CH4+ CH4- REAR CH3- CH3+ FC6.
An important point after buying a device Earthquake Sound T2000WD/1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Earthquake Sound T2000WD/1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Earthquake Sound T2000WD/1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Earthquake Sound T2000WD/1 you will learn all the available features of the product, as well as information on its operation. The information that you get Earthquake Sound T2000WD/1 will certainly help you make a decision on the purchase.
If you already are a holder of Earthquake Sound T2000WD/1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Earthquake Sound T2000WD/1.
However, one of the most important roles played by the user manual is to help in solving problems with Earthquake Sound T2000WD/1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Earthquake Sound T2000WD/1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
