Instruction/ maintenance manual of the product ModFX Faze Alesis
Go to page of 51
Re fe rence Manual.
This pa ge intentionally left blank 10% 20% 30% 40% 50% 60% 70% 80% 90% 100 % Copyright 2002, Alesis. All rights reserved Reproduction in whole or in part is prohibited. Specifications subject to change without notice. All trademarks are the property of their respective holders.
Table of Contents 1 Introduction .................................................................... 3 Welcome! .........................................................................................................3 About the Faze ................
Table Of Contents 2 Line conditioners and spike protectors ......................................................42 Care and Maintenance ................................................................ 4 3 Cleaning ....................................
Introduction 3 Welcome! Thank you for making the Alesis Faze a part of y our studio. Since 1984, we've been designing and building creative tools for the audio community. We believe in our products, because we've heard the results that creative people like you ha ve achie ved with them.
Introduction 4 About the Faze Your new Faze is a member of the Alesis ModFX family of performance effects boxes. This particular ModFX unit is a high- quality stereo phase shifter. Each ModFX unit provides a different set of sound effects and signal processing, and they are easy to ar range and connect to each other.
Introduction 5 Faze Ke y Featu res • Digital emulation of classic stereo phaser effects, with five different modulation sources • Uniform, friendly, uncomplicated user interface—no fiddling with.
Introduction 6 How to Use This Manual A little technical kno wledge will help you get the most out of y ou r gear...it’s really pretty simple. This manual is divided into the following sections describing the various functions and applications for the Faze.
Safety Instructions/Notices 7 Important Safety Instructions (English) Sa fe ty sy mbols used in this p roduct This symbol alerts the user that there are important operating and maintenance inst ructions in the literatu re accompanying this unit.
Important Safety Instructions 8 11. Use only attachments or accessories specified by the manufactu rer. 12. Use only with a cart, stand, bracket, or table designed for use with professional audio or music equipment. In any installation, make su re that inju ry or dama ge will not result from cables pulling on the apparatus and its mounting.
Important Safety Instructions 9 CE Declaration Of Conformity See ou r website at: http://www.alesis.com FCC Compliance Statement This device complies with Part 15 of the FCC rules.
Important Safety Instructions 10 Instructions de Sécurité Importantes (French) Sy mboles utilisés dans ce p roduit Ce symbole alèrte l’utilisateu r qu’il existe des instructions de fonctionnement et de maintenance dans la documentation jointe a vec ce produit.
Important Safety Instructions 11 11. N’utilisez que des accessoires spécifiés par le const ructeur. 12. N’utilisez qu’a vec un stand, ou table conçus pou r l’utilisation d’audio professionnel ou instruments de musique.
Important Safety Instructions 12 Lesen Sie bitte die folgende Sicherheitshinweise (German) Sicherheit Sy mbole verwendet in diesem Produkt Dieses Symbol alarmiert den Benutzer, daß es wichtige Funktionieren und Wartung Anweisungen in der Literatu r gibt, die diese Maßeinheit be gleitet.
Important Safety Instructions 13 11. Benutzen Sie nu r das vom Hersteller empfohlene Zubehör. 12. Verwenden Sie ausschließlich Wagen, Ständer, oder Tische, die speziell für professionelle Audio- und Musikinst rumente geeignet sind.
Important Safety Instructions 14 This pa ge intentionally left blank..
1 Quick Start Guide 15 If y ou can’t wait to get sta rted The Alesis Faze is a unique product, but its basic hookup and operation is similar to other effects units in most respects. If y ou're experienced with signal processors, this chapter is a "shorthand" guide for those who want to start using the Faze right away.
1 Quick Start Guide 16 A quick overview o f the controls TY PE The TY PE s witch s ele cts the ti m br e o f ph a sin g e f f e c t, a nd h o w t he l e ft c h a n ne l a nd th e r i g h t c h an ne l o f th e Faz e r el at e t o ea c h ot he r , as sh own b y t h e LED s n ex t to th e s w it c h.
2 Connections 17 Unpacking and Inspection Your Faze was packed carefully at the factory. The shipping carton was designed to protect the unit du ring shipping. Please retain this container in the highly unlikely e vent that you need to retu rn the Faze for servicing.
2 Connections 18 Connecting audio The Faze will work in many different applications, whether y ou are connecting an inst rument directly into it, or connecting it through a mixing console. But since the Faze is a stereo effect unit, it’s important to know whether the source will be stereo or mono.
Connections 2 19 Connecting to the Channel Inserts o f a mixing console: Most recording consoles ha ve a jack near the mic and line inputs labeled "Insert". This is typically a TRS jack with the send and retu rn on the same jack. To use the Faze as a channel insert, you will need an insert cable (not included).
2 Connections 20 Connecting to the Main Ou tputs o f a mixing console: In addition to channel inserts, most mixing consoles have main insert jacks near the main outputs. You can use insert cables to connect the Faze to the main L/R bus the same way you connect it to a pair of channels.
Connections 2 21 Connecting to the inse rts on an instrume nt amplifie r : The insert send on a guitar or bass amp is usually labeled "effects send and retu rn" or "insert send and return". This allows you to preamplify your instrument before phasing it and sending it to the power amp.
2 Connections 22 Connecting to equipment with XLR inpu ts and outputs: If you are connecting the Faze to a product with XLR balanced inputs and outputs, y ou will need to convert this signal to a 1/4” unbalanced connector. Make su re that Pin 2 of the XLR connector is connected to the Tip of the 1/4” adapter or cable.
Connections 2 23 Using the ModLink The Faze can be connected to other effect boxes in the ModFX family via the ModLink. The ModLink is a cable-free connection between two ModFX units that t ransfers digital audio and word clock. The 9-pin male connector on the left side of the unit is the ModLink IN port.
2 Connections 24 This pa ge intentionally left blank..
3 Using the Faze 25 This section defines phasing, and e xplains the functions of the Faze’s cont rols in greater detail. The technical information in the ne xt few pages will help you get the most out of y ou r gear.
3 Using the Faze 26 What is Tempo Sync ? Phase shifting has a regular cycle over time. Sometimes, y ou’ll want the rate of phasing to match the beat of y ou r music instead of being random.
Using the Faze 3 27 Description of Controls Rate The [RA TE] knob changes the phasing modulation speed. When the mod sou rce is set to ENVELOPE it affects the attack and release time of the envelope. In all other modes it affects the LFO (lo w frequency oscillator) speed.
3 Using the Faze 28 Cente r The [CENTER] knob changes the center frequency of the Faze’s main filter notch. Its effect varies depending on the mode, [DEPTH] and [RATE], but in frequency terms, when the [CENTER] knob is at the 12 o’clock position, you’ll hear the frequency of the phase shift oscillate up and do wn from the center frequency.
Using the Faze 3 29 Modulation Select Switch The up/do wn rocker switch on the right side of the unit selects the modulation source for the p haser. The LEDs ne xt to the switch light up to indicate the cu rrent mode. There are five kinds of modulation available, explained below.
3 Using the Faze 30 Faze almost jitters as it t ries to follow the envelope of the incoming signal exactly. In this mode, TEMPO SYNC/T A P TEMPO featu res ha ve no effect. Uncertainty This mode generates a continually altering random waveform for the phase modulation, changing direction at various points du ring the cycle.
Using the Faze 3 31 TYPE Rocke r Switch The up/do wn rock er switch on the left side of the unit selects the type of phasing effect. The LEDs next to the switch light up to indicate the cu rrent mode.
3 Using the Faze 32 Async Ste reo In ASYNC (asynchronous) STEREO mode, the modulation of the left and right channels of the Faze are not synchronized. The left and right channels will have a similar rate, but “drift” from each other in a random way (e xcept in PATTERN mode).
Using the Faze 3 33 Reset Mod Press this button to reset the phase of the phaser modulation source as follows: • In TRIANGLE mode, press [RESET MOD] to start the wa ve from the be ginning of its phase.
3 Using the Faze 34 Tap Tempo This button affects the speed of the effect whenever the [MODULATION] switch is set to a TEMPO SYNC mode. At any time y ou can tap this button along with the music to set a new tempo. The Tap Tempo light will flash at the cu r rent tempo.
4 Sample Settings 35 While there’s nothing like disco vering new sounds for yoursel f, we thought it would be a good idea to pro vide some sample settings of the Faze to help get you started. Simply set the knobs on y ou r Faze so they’re at the positions shown, and press the rocker switches so each effect is in the mode shown by the LEDs.
4 Sample Settings 36 P hreaky Faze This us e s th e U N CE R TA I NTY wav e w ith R EG EN s et to m ax i m um . Th e CO NT RARY S T ER EO ty p e m a k es t h i s e s p e c i a ll y e ff e c ti v e o n h e a dp h o n es .
Sample Settings 4 37 B lank F il l in y o u r o w n fa v or it e s et ti ng s h e r e . Pho toc op y t h e n e x t pa g e if yo u ne e d mo r e s pa c e . F aze Tracker Tap q ua r te r n ot es in to this p atch , a nd th e ph as e will j um p to diffe re nt le v e ls e a ch b e a t , in a r e c u rr in g P AT TERN .
4 Sample Settings 38 Blank Set tings Templates.
5 Troubleshooting 39 Troubleshooting Index If you experience problems while operating you r Faze, please use the following table to locate possible causes and solutions before contacting Alesis Product Support for assistance. Sy mptoms Cause Solution No a udi o output s.
5 Troubleshooting 40 Sy mptoms Cause Solution AC hum Gro und lo op Place al l eq uip m ent in the stu d io on a co m m o n gro un d (s e e ne xt pa ge) Whistl es or ton es in out put [REG EN] set to o.
Troubleshooting 5 41 Avoiding g round loop noise In today’s studio, where it seems every piece of equipment has its own computer chip inside, there are many opportunities for ground loop problems to occu r.
5 Troubleshooting 42 4. Keep all cables as short as possible, especially in unbalanced circuits. If the basic experiments don’t unco ver the sou rce of the problem, consult your dealer or technician t rained in proper studio grounding techniques.
Troubleshooting 5 43 Care and Maintenance Cleaning Disconnect the AC cord, then use a damp cloth to clean the Faze’s metal and plastic su rfaces. For heavy dirt, use a non-abrasive household cleaner such as Formula 409™ or Fantastik™.
5 Troubleshooting 44 Obtaining repai r service Before contacting Alesis, check over all your connections, and make su re you’ve read the manual. Customers in the USA and Canada: If the problem persists, contact Alesis and request the Product Support department.
Specifications 45 Audio Inpu t Input Connectors: 2 unbalanced 1/4” jacks Maximum Input Le vel: +10 dBV Nominal Level: -10 dBV Input Impedance: 470k Ω Input Converter Resolution: 24-bit, 48 kHz sam.
6 Specifications 46 This pa ge intentionally left blank..
Index 47 amplifier, 21 ASYNC STEREO mode, 32 audio input tempo set by, 34 BYPASS , 16 , 33 with foot switch, 33 cables, 22 CENTER , 16 , 28, 40 effect on RESET MOD, 33 CLASSIC mode, 31 CONTRARY STEREO.
Warranty / Contact Alesis 48 Alesis Limited Wa r ranty AL E SI S C ORP OR ATI ON ( "A LES I S" ) w ar r an ts th is product to be fr ee of defect s in material an d w or kman sh i p fo r a pe rio d of on e (1 ) y ear f or pa r ts an d for a per iod of on e ( 1) year fo r l abor fr om the date of ori gi nal ret ail pu rc hase.
Warranty/Contact Information 49 Alesis Contact Information Alesis Los Angeles, CA USA E-mail: support@alesis.com Website: http://www.alesis.com Alesis Faze Reference Manual Revision 1.0 by Dan Tinen Copy right 2002, Alesis. All rights reserved Reproduction in whole or in part is prohibited.
An important point after buying a device Alesis ModFX Faze (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alesis ModFX Faze yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alesis ModFX Faze - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alesis ModFX Faze you will learn all the available features of the product, as well as information on its operation. The information that you get Alesis ModFX Faze will certainly help you make a decision on the purchase.
If you already are a holder of Alesis ModFX Faze, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alesis ModFX Faze.
However, one of the most important roles played by the user manual is to help in solving problems with Alesis ModFX Faze. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alesis ModFX Faze along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
