Instruction/ maintenance manual of the product CSV20PFD FUNAI
Go to page of 34
COLOR TV/D VD CSV20PFD (20 inc h) O WNER’S MANU AL Please read before using this equipment If you need additional oper ating assistance after reading this owner’ s manual or to order replacement accessories, please call T OLL FREE : 1-800-518-1180.
1. Read instructions - All the safety and operating instruc- tions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instruc- tions should be retained for future reference. 3. Heed W arnings - All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 13. Outdoor Antenna grounding - If an outside antenna or cable system is connected to the unit, be sure the anten- na or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
- 4 - EN The serial number of this product may be found on the back of the unit. No other unit has the same serial number as yours. Y ou should record the number and other vital information here and retain this book as a per- manent record of your purchase to aid identification in case of theft.
- 5 - EN AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat.
- 6 - EN T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 W ARNING . . . . . . . . . . . . . . . . .
- 7 - EN • Infrared remote control • T rilingual on screen TV setup display selectab le in English, Spanish or French • 181 channel capability PLL frequency synthesiz- er tuner with direct station call (A converter may be necessary to view scrambled cable channels.
- 8 - EN OPERA TING CONTROLS AND FUNCTIONS - REMO TE CONTR OL - FRONT P ANEL LK L K C H B A G F E - SEARCH - D POWER V OLUME CHANNEL SKIP SKIP PLA Y PA USE STOP OPEN/ CLOSE VIDEO L – A UDIO – R 12.
- 9 - EN COAXIAL ANT . 37 36 35 18. TITLE Button [P .20] Displays the title menu. 19. CLEAR Button [P .22] Press to clear or cancel a setting currently entered. 20. MODE Button [P .23. 24, 25] Press to call up the program screen or the ran- dom screen in the stop mode.
COAXIAL ANT. ANT. Cable TV signal Antenna or IN OUT - 10 - EN NOTE: Before plugging the antenna into the ANT . jack of the unit, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT . jack of the unit.
- 11 - EN CONNECTING TO FRONT A/V INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use the AUDIO/VIDEO input jacks on the front of the unit. Connect the Audio/V ideo output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit.
- 12 - EN COAXIAL ANT. F ront speaker (left) Center speaker F ront speaker (right) Surround speaker (left) Surround speaker (right) Subwoof er To COAXIAL jac k (Only D VD A UDIO OUT) To Coaxial digita.
- 13 - EN TV SECTION TV OPERA TION AND SETTINGS DEGAUSSING This television has a degaussing circuit that will clear up color errors on the TV screen that are caused by any excess magnetism which happens to get too close to the TV . This circuit is designed to operate once when the set is first plugged in.
- 14 - EN • If the unit displays a black box on the TV screen, this means that the unit is set to the TEXT mode. To clear screen, select [CAP- TION1], [CAPTION2] or [OFF]. Make sure ... • The unit must be turned on. 1 Select “CAPTION” Press [SETUP] .
- 15 - EN CHANNEL SET UP Make sure ... • The unit must be turned on. AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory .
- 16 - EN This feature enables parents to prevent their children from watching inappropriate material on TV . When you try to access a program which is blocked, “PROTECTED PROGRAM by ...” message appears on the TV screen. V -CHIP SET UP Make sure .
- 17 - EN CHANGE ACCESS CODE Follow steps 1 to 3 in the “V -CHIP SET UP” sec- tion on page 16. 4 Enter New code Press the Number buttons to enter your desired access code in the “NEW CODE” space, then enter the same code in the “CONFIRM CODE” space.
- 18 - EN CABLE CHANNEL DESIGNA TIONS If you subscribe to cable TV , the channels are displayed as 1-125. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company . The following is a chart of common cable channel designations.
- 19 - EN D VD SECTION ABOUT THE DISCS If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as P AL cannot be played back.
- 20 - EN PLA YING A DISC BASIC PLA YBACK Getting started ¡ T urn on the power of amplifier and any other com- ponents, if necessary . 1 Press [PO WER]. ¡ The power will turn on. 2 Press [OPEN/CLOSE A ] to open disc load- ing tray . 3 Place the chosen disc in the tra y , with the label facing up.
- 21 - EN STEP BY STEP PLA YBACK 1 During playbac k, press [P AUSE F ]. ¡ Playback will pause and sound will be muted. 2 The disc goes forwar d b y one frame each time [P A USE F ] is pressed. 3 To e xit step by step pla yback, press [PLA Y O ]. DVD-V RESUME 1 During playbac k, press [STOP C ].
- 22 - EN SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons 1 Press the Number buttons to enter the desired track n umber . ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number (eg.
- 23 - EN SPECIAL PLA YBACK FUNCTION REPEA T REPEA T TITLE / CHAPTER To activate the repeat function, press [REPEA T] during playbac k. ¡ The repeat mode changes as described below every time you press the button. DVD-V REPEA T is available only during playback.
- 24 - EN CHANGING THE SETTINGS AUDIO LANGUAGE The unit allows you to select a language during DVD disc (if multi languages are available) playback. 1 Press [A UDIO] during playback. 2 Press [A UDIO] repeatedly to select your desired language. NOTE: ¡ Pressing [AUDIO] may not work on some DVDs with multiple audio languages (e.
- 25 - EN Y ou can enjoy surround-sound effect over two speak- ers on this unit. 1 Press [MODE] twice (CD: once) during play- back. 2 Press [ENTER] to set it “1” (Natural effect), “2” (Emphasized effect) or “OFF”. 3 Press [MODE] to exit. ¡ Y ou can also exit the menu by pressing [RETURN] .
- 26 - EN CHANGING THE DVD SET UP ITEMS CUSTOM MENU Y ou can change the DVD player ’ s settings. 1 Press [SETUP] twice in the stop mode so that the D VD SETUP menu appear s. ¡ Press [ L ] to select “CUSTOM” then press [ENTER] . NOTE: ¡ If the menu does not appear , press [ PLA Y O ] first, then press [STOP C ] .
- 27 - EN AUDIO SETTING Choose the appropriate Audio settings for your equip- ment as it only affects during the playback of DVD discs. Follow steps 1 to 2 in the “CUSTOM MENU” sec- tion on page 26. 3 Press [ K K / L L ] to select the belo w items then press [ENTER].
- 28 - EN CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back.
- 29 - EN Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture or sound • Make sure the AC cord is connected to an AC outlet.
- 30 - EN CLOSED CAPTION PROBLEM POSSIBLE REMEDY Misspelling in captions • Error committed by the closed captioning production company . • Possible in a live broadcast. Not in case of a prerecorded program. T ext is not shown in its entirety or • A few seconds of delay is common for live broadcast.
- 31 - EN NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback.
- 32 - EN CABINET CLEANING • W ipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed sur- faces.
- 33 - EN CR T : 20 inch in-line gun, 90˚ deflection tube T elevision system: NTSC-M Closed caption system: §15.119/FCC Channel coverage: VHF: 2 ~ 13 UHF: 14 ~ 69 CA TV : 2 ~13, A ~ W , W+1 ~ W+84, .
Printed in Malaysia 1EMN20673 T91 1 1CM ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP .
An important point after buying a device FUNAI CSV20PFD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FUNAI CSV20PFD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FUNAI CSV20PFD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FUNAI CSV20PFD you will learn all the available features of the product, as well as information on its operation. The information that you get FUNAI CSV20PFD will certainly help you make a decision on the purchase.
If you already are a holder of FUNAI CSV20PFD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FUNAI CSV20PFD.
However, one of the most important roles played by the user manual is to help in solving problems with FUNAI CSV20PFD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FUNAI CSV20PFD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
