Instruction/ maintenance manual of the product Navtex NX-700-B Furuno
Go to page of 2
TRADE MARK REGISTERED MARCA REGISTRADA SPECIFICA TIONS SUBJECT T O CHANGE WITHOUT NOTICE 05055U Printed in Japan 58 669 02 20 FURUNO U.S.A., INC. Camas, Washington, U.S.A. Phone: +1 360-834-9300 Fax: +1 360-834-9400 FURUNO (UK) LIMITED Denmead, Hampshire, U.
Shows that an International frequency (518 kHz) message has not been read. While printing. Print error (no paper, not connected to the printer, etc.) Displayed when the battery voltage is low. Displayed while the NAVTEX is receiving a message.
An important point after buying a device Furuno Navtex NX-700-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno Navtex NX-700-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno Navtex NX-700-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno Navtex NX-700-B you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno Navtex NX-700-B will certainly help you make a decision on the purchase.
If you already are a holder of Furuno Navtex NX-700-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno Navtex NX-700-B.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno Navtex NX-700-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno Navtex NX-700-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center