Instruction/ maintenance manual of the product USB Data Card Programmer Garmin
Go to page of 12
USB Data Car d Pr ogrammer user’ s manual and installation guide.
© 2000 GARMIN Corporation GARMIN International, Inc. 1200 E 151 st Street, Olathe, Kansas 66062 U.S.A. T el. 913/397.8200 or 800/800.1020 Fax. 913/397.8282 GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9AQ U.
i Intr oduction Intr oduction Thank you for choosing the GARMIN USB Data Card Pr ogram- mer . T o get successful results fr om your new programmer , take time to read thr ough this user’ s manual in order to fully understand all of the operating procedur es.
ii Introduction Software License Agreement THIS SOFTW ARE IS OWNED BY GARMIN CORPORA TION (“GARMIN”) AND IS PROTECTED UNDER COPYRIGHT LA WS AND INTERNA TIONAL COPYRIGHT TREA TIES.
iii Intr oduction Software License Agreement 4. TERM: This License shall continue for as long as you use the Product. However , this License will terminate automatically without notice from GARMIN if you fail to comply with any of its terms or conditions.
iv Introduction Featur es 6 Ft. USB Data Cable Data Car d Slot (accepts only GARMIN Data Car ds) Data Car d Programmer USB Connector GARMIN Data Car ds The USB Data Car d Programmer utilizes GARMIN Data Car ds.
1 Intr oduction Installation of the USB Data Car d Pr ogr ammer and Device Drivers 1. Connect the USB connector on the end of the Progr ammer cable to the USB port on the back of the computer . Most computers have two USB P orts . Either port will work.
2 Installation T o Install the MapSource Software Upgr ade including USB Data Card Pr ogrammer Support : 1. Insert the Progr ammer CD-ROM into your computer’ s CD-ROM drive. 2. Click the Start button and select “Run... ” 3. T hen type in the drive letter of your CD-ROM drive followed by the MapSource Update file name: MSUPDA TE.
3 Installation Installing a Data Car d in the Progr ammer T o Install a GARMIN Data Card: 1. Insert the Data Card (Label up and pin connector end first) into the card slot in the Programmer (picture to the right). 2. Be certain to install the Data Card completely into the slot to be certain pin connections have been made .
4 T r ouble Shooting T rouble Shooting Guide Symptom Probable Cause Remedy W indows does not recognize that the Programmer has been connected to the computer . When preparing to transfer data, a “No compatible device available.” message appears. When preparing to transfer data, a “There is no data card in the Pr ogrammer .
Help us to better support you by completing our on-line registration today! Have the serial number of your USB Data Car d Programmer handy and connect to our website ( www .
©2000 GARMIN Corporation GARMIN International 1200 East 151st Street, Olathe, Kansas 66062, U.S.A GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9AQ, U.K. GARMIN (Asia) Corporation No 68, Jangshu 2 nd Road, Shijr , T aipei County , T aiwan www .
An important point after buying a device Garmin USB Data Card Programmer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin USB Data Card Programmer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin USB Data Card Programmer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin USB Data Card Programmer you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin USB Data Card Programmer will certainly help you make a decision on the purchase.
If you already are a holder of Garmin USB Data Card Programmer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin USB Data Card Programmer.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin USB Data Card Programmer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin USB Data Card Programmer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
