Instruction/ maintenance manual of the product SureBind System 1 GBC
Go to page of 6
1.0 INTRODUCTION 1.1 OPERATIONAL COMPONENTS LAYOUT Figure 1 - 1 1 - 2 Pressure Bar Handle Housing Base Waste Tray Punch Guide Light Bind Guide Locating Pin Backstop Strip Recess.
2.0 SPECIFICATIONS DESCRIPTION: Punch/Binder PUNCH CAPACITY:* 1/8 in. (3.2 mm) X 14 in. (355.6 mm) 25 sheets of 20 lb. bond paper *Note: No more than 4 composition covers, or 3 plastic covers should be punched at one time. Punching stacks of these materials may result in damage to the punch mechanism.
3.0 INSTALLATION PROCEDURE 3.1 Unpacking Instructions To unpack the machi ne, carefully remove the staples and open the carton. Remove the packing material from the top and around the machine, and lift the machine straight up out of the carton.
4.0 OPERATING INSTRUCTIONS 4.1 Punching 1. Adjust the punch edge guide to the correct paper length. Check the punch alignment by punching a sheet of paper and folding it in half along the punched edge (See Figure 4 - 1). Match the holes up: if the corners of the paper match with no overlap, the alignment is correct.
4.0 OPERA TING INSTRUCTIONS 4.2 Document Assembly 1. Check the bind edge guide alignment by inserting a receiving strip in the strip recess area. Lay a sheet of correctly aligned punched paper on the strip, matching up the holes and the strip so that the strip is not showing at the top or the bottom of the paper.
4.0 OPERATING INSTRUCTIONS 4.3 Binding 1. Begin the binding process by pulling the pressure bar toward you and lowering it on top of the document. The indicator light will illuminate. 2. Pull the ha ndle down in a uniform, smooth motion and leave it down.
An important point after buying a device GBC SureBind System 1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GBC SureBind System 1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GBC SureBind System 1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GBC SureBind System 1 you will learn all the available features of the product, as well as information on its operation. The information that you get GBC SureBind System 1 will certainly help you make a decision on the purchase.
If you already are a holder of GBC SureBind System 1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GBC SureBind System 1.
However, one of the most important roles played by the user manual is to help in solving problems with GBC SureBind System 1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GBC SureBind System 1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center