Instruction/ maintenance manual of the product Interlogix BusSecure GE
Go to page of 37
BusSecure Mobile Digital Video Recorder.
© 2003 Kalatel, a GE Interlogix company All Rights Reserved. Any GE Interlogix, Kalatel division, software supplied with GE Interlogix, Kalatel division, products is proprietary and furnished under license and can be used or copied only in accordance with the terms of such license.
BusSecure User Manual Table of Contents 0150 - 0263A / May 2003 3 T ABLE OF C ONTENTS B EFORE Y OU B EGIN .......................................................................................................... 4 1 T HEORY OF O PERATIONS ...........
Before You Begin BusSecure User Manual 4 0150 - 0263A / May 2003 B EFORE Y OU B EGIN Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes.
BusSecure User Manual Theory of Operations 0150 - 0263A / May 2003 5 1 T HEORY OF O PERATIONS BusSecure is an industry - specific security camera system developed to help solve problems experienced by fleet operators.
Theory of Operations BusSecure User Manual 6 0150 - 0263A / May 2003 1.3 F EATURES OF A B US S ECURE S YSTEM A BusSecure system consists o f the required equipment and the accessories shown in Figure 1 . Aluminum housing Microphone Camera Panic Button Up to four cameras per system Impact Sensor RG179 Siamese coaxial cable DVR assembly Figure 1.
BusSecure User Manual Hardware Installation 0150 - 0263A / May 2003 7 2 H ARDWARE I NSTALLATION The BusSecure/DVR digital video recording system supports up to four cameras, and an optional impact sensor, panic button, and microphone. Note: Most BusSecure products are not supplied with mounting hardware.
Hardware Installation BusSecure User Manual 8 0150 - 0263A / May 2003 2.2 D ETERMINING A S YSTEM L AYOUT Figure 2 is an example camera layout for a bus application.
BusSecure User Manual Hardware Installation 0150 - 0263A / May 2003 9 2.3 R UNNING C AMERA C ABLES CAUTION When instal ling cables, follow these guidelines: Avoid excessive lengths of cable at the control and device end. Excess cable should be pulled back to a duct area where it can be folded and secured.
Hardware Installation BusSecure User Manual 10 0150 - 0263A / May 2003 2.4 I NSTALLING C AMERA A SSEMBLIES The BusSecure system will support up to four cameras (color and/or monochrome). Cameras supported by the Bus Secure system can provide a 1.0 V pk - pk composite analog video signal, either NTSC or PAL, at 75 ohm (CCTV standard).
BusSecure User Manual Hardware Installation 0150 - 0263A / May 2003 11 2.4.2 I NSTALLING F LUSH -M OUNT C AMERA A SSEMBLIES There are two types of flush - mount cameras — square and angled. Flush - mount camera assemblies are mounted flush with the side panels of the vehicle.
Hardware Installation BusSecure User Manual 12 0150 - 0263A / May 2003 Figure 9. Angled flush - mount housing cover Figure 10. Square flush - mount housing cover 2.4.3 A DJUSTIN G C AMERAS FOR F UNCTIONAL F IELD OF V IEW Depending on location, the camera’s position might have to be adjusted to provide the best field of view.
BusSecure User Manual Hardware Installation 0150 - 0263A / May 2003 13 To adjust the camera according to where it will be mounted on the vehicle, perfor m the following: 1) Figure 13 shows orientation of a camera for mounting on the curbside of the bus, the backside of the bus, or in a forward - facing position on the dashboard.
Hardware Installation BusSecure User Manual 14 0150 - 0263A / May 2003 2.5 I NSTALLING THE I MPACT S ENSOR ( OPTIONAL ) The Impact Sensor is typically mounted near the DVR and comes with a 7 - foot cable that terminates in the DVR. CAUTION Do not install the Impact Sensor unt il you have tested its functionality on each vehicle.
BusSecure User Manual Hardware Installation 0150 - 0263A / May 2003 15 2.6 I NSTALLING THE P ANIC B UTTON ( OPTIONAL ) The Panic Button is typically installed within reach of the driver. Note: There are two versions of the panic button: one with a key reset and one without.
DVR I nstallation and Wiring BusSecure User Manual 16 0150 - 0263A / May 2003 3 DVR I NSTALLATION AND W IRING A removable hard disk drive (HDD) is housed within the DVR that is mounted to the vehicle. All connections are made through the terminals at the back of the unit .
BusSecure User Manual DVR Installation and Wiring 0150 - 0263A / May 2003 17 3.2 W IRING THE DVR All wire connections between the DVR and auxiliary devices are made through the DVR’s Rear Panel Assembly (see Figure 22). 3.2.1.1 P1 T ERMINAL B LOCK C ONNECTIONS (L OWER C ONNECTOR ) The P1 terminal block provides power to the vehicle’s cameras.
DVR I nstallation and Wiring BusSecure User Manual 18 0150 - 0263A / May 2003 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + 1 2 V D C + 1 2 V D C + 1 2 V D C + 1 2 V D C G r o u n d G r o u n d.
BusSecure User Manual DVR Installation and Wiring 0150 - 0263A / May 2003 19 3.2.2 A LAR M AND T RIGGER I NPUTS The BusSecure system allows for four inputs, which can be defined as either triggers or alarms. The Impact Sensor and Panic Button are both examples of alarm inputs.
DVR I nstallation and Wiring BusSecure User Manual 20 0150 - 0263A / May 2003 3.2.2.2 P ANIC B UTTON C ONNECTIONS The Panic Button’s N/C wire and common wire connect to one of the pairs of input terminals as shown in Figure 27. Note: The Panic Button also has wires that are used for status outputs.
BusSecure User Manual DVR Installation and Wiring 0150 - 0263A / May 2003 21 3.2.4 A UDIO C ONNECTIONS 1) Rem ove the P2 terminal block ( in Figure 22) from the DVR back assembly. 2) Connect the audio and power cables from the microphone as shown in Figure 29.
BusSecure Configuration BusSecure User Manual 22 0150 - 0263A / May 2003 4 B US S ECURE C ONFIGURATION BusSecure configuration is achieved thro ugh a web based configuration utility. The BusSecure must be completely installed, powered up, and connected to a PC or Laptop through a network.
BusSecure User Manual BusSecure Configuration 0150 - 0263A / May 2003 23 4.1 C ONFIGURATION Click on Configure the unit to display the configuration page.
BusSecure Configuration BusSecure User Manual 24 0150 - 0263A / May 2003 4.1.1 C ONFIGURE N ETWORK Click on the Configure Network option to display the following screen: The configuration options on t.
BusSecure User Manual BusSecure Configuration 0150 - 0263A / May 2003 25 4.1.2 C ONFIGURE C AMERAS Click on the Configure Camera option to display the following screen: The configuration op tions on this page include: • Name – User supplied camera name or designation.
BusSecure Configuration BusSecure User Manual 26 0150 - 0263A / May 2003 Note: Once the Accept button is clicked, the buttons on the bottom of the screen change to a Save and Cancel button. Clicking on Save at this point will cause your changes to be written and the BusSecure to reboot.
BusSecure User Manual BusSecure Configuration 0150 - 0263A / May 2003 27 4.1.4 C ONFIGURE S YSTEM Click on the Configure System option to display the following screen: The configuration options on this page include: • Vehicle ID – User supplied vehicle name or designation.
BusSecure Configuration BusSecure User Manual 28 0150 - 0263A / May 2003 4.2 S OFTWARE U PGRADE Click on Upgrade the unit to display the configuration page. Click on the Browse button and navigate to the upgrade file. Click on the Send File button. The following screen will appear.
BusSecure User Manual Troubleshooting 0150 - 0263A / May 2003 29 5 T ROUBLESHOOTING F ACTORY S ETTINGS : To reset the factory settings, remove the cover panel and hold down the indicated button ( ) for 5 seconds. This action will restore the default IP address to 3.
TroubleShooting BusSecure User Manual 30 0150 - 0263A / May 2003 R EMOVABLE DVR: LED S FROM LEFT TO RIGHT : Proces sor is writing to the hard drive (flashing green).
BusSecure User Manual Troubleshooting 0150 - 0263A / May 2003 31 3) Terminal 13 of the P2 terminal block is the normal operation output. Vol tage should be observable on the meter when the BusSecure is recording normally. Note: Voltage may vary from +5 VDC to +12 VDC, depending on the type of status indicator installed.
Appendix A BusSecure User Manual 32 0150 - 0263A / May 2003 A PPENDIX A. C AMERA M OUNTING P LATE T EMPLATE (All measurements shown in inches).
BusSecure User Manual Appendix B 0150 - 0263A / May 2003 33 A PPENDIX B. I NSTALLATION C HECK S HEET Vehicle ID DVR Serial Number IP Address Technician Item Verify Date Comments/Discrepancy 12 VDC con.
Appendix C BusSecure User Manual 34 0150 - 0263A / May 2003 A PPENDIX C. DVR C ONFIGURATION W ORKSHEET Property Name: 1. Inputs 1 – 4 Outputs 1 and 2 1.
BusSecure User Manual Appendix C 0150 - 0263A / May 2003 35 3. Select Input to Set Up None to 1 – 4 Input 1 Type: Alarm – Trigger – Disabled Input 1 Name: ____________ Input 1 Pre Alarm Time: 00.
Appendix C BusSecure User Manual 36 0150 - 0263A / May 2003 W ARRANTY AND R ETURN I NFORMATION GE Interlogix, Kalatel division warrants BusSecure equipment for one year from the date of delivery and acceptance of property, or 90 days after the invoice date for equipment obtain ed by the vehicle OEM.
BusSecure User Manual Appendix C 0150 - 0263A / May 2003 37 Ÿ Fewer than 45 days from purchase, GE Interlogix, Kalatel division will replace the product with new equipment. Ÿ From 45 days to 1 year from purchase, GE Interlogix, Kalatel division will replace the product with refurbished equipment.
An important point after buying a device GE GE Interlogix BusSecure (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE GE Interlogix BusSecure yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE GE Interlogix BusSecure - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE GE Interlogix BusSecure you will learn all the available features of the product, as well as information on its operation. The information that you get GE GE Interlogix BusSecure will certainly help you make a decision on the purchase.
If you already are a holder of GE GE Interlogix BusSecure, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE GE Interlogix BusSecure.
However, one of the most important roles played by the user manual is to help in solving problems with GE GE Interlogix BusSecure. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE GE Interlogix BusSecure along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
