Instruction/ maintenance manual of the product GPS5CC GE
Go to page of 4
(iiiiii iii!!{{{{{{i C O n s u _iiv_i e _ir {iii:i;;,i iii _ii ¸'_i (i:;ii u :!!{{; _il _i! ii (i1 ii Appliances Installation Instructions GPS5CC, GPS sher Side Panel Kit The Side Panel Kit is used to enclose a built-in dishwasher when a fully supported countertop and cabinet cavity do not have an end panel present.
installation instructions The installation of the side panel requires the panel support bracket to be mounted to the underside of the countertop and the toekick panel to be mounted to the floor. If the panel is installed perpendicular to a wall, the side panel will also be fastened to the wall.
Installation Instructions STEP 4 FASTEN PANEL SUPPORT BRACKET TO UNDERSIDE OF COUNTERTOP AND TOEKICK PANEL TO FLOOR Fasten the panel support bracket to the underside of the countertop using two #8 x 3/4" wood screws and two 3/16" flat washers.
installation instructions STEP 9 ATTACH SIDE PANEL TO SUPPORT BRACKET AND TOGGLE BOLTS Place the side panel against the panel support bracket and insert two 1/4" machine screws through the side panel and support bracket while aligning the side panel with the toggle bolts.
An important point after buying a device GE GPS5CC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE GPS5CC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE GPS5CC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE GPS5CC you will learn all the available features of the product, as well as information on its operation. The information that you get GE GPS5CC will certainly help you make a decision on the purchase.
If you already are a holder of GE GPS5CC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE GPS5CC.
However, one of the most important roles played by the user manual is to help in solving problems with GE GPS5CC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE GPS5CC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
