Instruction/ maintenance manual of the product 5-Port 10/100/1000MBps Gigabit Ethernet Switch Gigabyte
Go to page of 23
5 - Port 10/100/1000Mbps Gigabit Ethernet Switch 4×1000BASE - T plus 1 ×mini - GBIC User’s Guide.
.
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
.
T ABL E OF C ONTENTS ABOUT THIS GUIDE ......................................... 1 T ERMS .............................................................. 1 O VERVIEW OF THIS U SER ’ S G UIDE .................... 1 INTRODUCTION ........................
.
.
.
1 A BOUT T HIS G UIDE This user’s guide tells you how to install your 5 - Port 1 0 /100/1000Mbps Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network.
.
3 I NTRODUCTION This section describes the features of the 5 - Port 1 0 /100/1000M bps Gigabit Et hernet Switch, as well as provid ing some background information about Gigabit Ethernet and switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.
4 In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost - effective method to take advantage of today and tomorrow’s rapidly improving switching and routing internetworking technologies.
5 upgrade and takes advantage of the existing investment in hardware, software, and personnel training. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology.
6 Features The 5 - Port 10/100/1000Mbps Gigabit Ethernet Switch was designed for easy installation and high performance in an environme nt where traffic on the network and the number of users increase continuously.
7 U NPACKING AND S ETUP This chapter provides unpacking and setup information for the Switch. Unpacking Open th e shipping carton of the Switch and carefully unpack its contents.
8 Leave at least 10cm of space at the left and right hand s ide of the Switch for ventilation. Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.
9.
10 I DENTIFYING E XTERNAL C OMPONENTS This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The figure below shows the front panels of the switch. Front panel view of the Switch LED Indicators Comprehensive LED indicators display the conditions of the Switch and status of the network.
11 DC Power J ack: Power is supplied through an external AC power adapter. Check the technical specification section for information about the AC power input voltage. mini - GBIC Port ( Port 1 ): The Switch is equipped with one mini - GBIC port, supported optional 1000BASE - SX /LX mini - GBIC module.
12 Port 1 mini - GBIC Status LEDs LINK/ACT On : When the mini - GBIC module is installed and connected to a network, the Link/ACT LED lights on . Blinking : When the LED is blinking, the mini - GBIC module is receiving data on a network. Off : No link .
13 On : When the LED lights on, the respective port is connected to a Gigabit Ethernet network. Off : The respective port is connected to a 10/100Mbps Ethernet ne twork . 100M bps On : When the LED lights on, the respective port is connected to a 100Mbps Fast Ethernet network.
14 T ECHNICAL S PECIFICATIONS General Standards: IEE E 802.3ab 1000BASE - T IEEE 802.3u 100BASE - TX IEEE 802.3 10BASE - T IEEE 802.3z 1000BASE - SX/LX(mini GBIC) IEEE 802.
15 Physical and Environmental DC inputs : 7.5V 1.5A Power Consumption : 7.6 watts maximum Operating Temperature : 0 ° C ~ 40 ° C Storage Temperature : - 10 ° C ~ 70 ° C Humidity : 5% ~ 95% RH, non.
An important point after buying a device Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte 5-Port 10/100/1000MBps Gigabit Ethernet Switch along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
