Instruction/ maintenance manual of the product 78 Graco
Go to page of 56
GPSMAP ® 78 series owner ’ s manual for use with the GPSMAP 78, GPSMAP 78S, and GPSMAP 78Sc.
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
T able of Contents Getting Started .................... 1 Manual Conventions .................. 1 Device Overview........................ 2 Battery Information .................... 3 Installing the Batteries ............... 3 T urning the Device On or Off .
Display Settings ....................... 28 Setting Up T ones ..................... 28 Marine Settings........................ 28 Setting up Marine Alarms ........ 29 Resetting Data ......................... 30 Changing the Page Sequence .............
GPSMAP 78 Series Owner ’s Manual 1 Getting Started Getting Started W ARNING See the Important Safety and Pr oduct Information guide in the product box for product warnings and other important information. When using your device the rst time, you should complete the following tasks to set up the device and get to know the basic features.
2 GPSMAP 78 Series Owner’s Manual Getting Started Device Overview Internal antenna Buttons Display Battery compartment Serial port (under weather cap) mini-USB port (under weather cap) microSD ™ c.
GPSMAP 78 Series Owner ’s Manual 3 Getting Started Battery Information The device operates on two AA batteries. Use alkaline, NiMH, or lithium batteries. Use precharged NiMH or lithium batteries for best results ( page 38 ). Installing the Batteries 1.
4 GPSMAP 78 Series Owner’s Manual Getting Started Acquiring Satellite Signals It may take 30 to 60 seconds to acquire signals. 1. Go outdoors to an open area. 2. If necessary , turn on the device. 3. W ait while the device searches for satellites. A question mark ashes while the device determines your location.
GPSMAP 78 Series Owner ’s Manual 5 Getting Started QUIT Press QUIT to cancel or return to the previous menu or page. P AGE Press P AGE to scroll through the main pages ( page 12 ). MENU Press MENU to open the options menu for the page that is currently open.
6 GPSMAP 78 Series Owner’s Manual Navigating with W aypoints and Routes Navigating with W aypoints and Routes W aypoints W aypoints are locations you record and store in the device. Creating W aypoints 1. From any page, press and hold .
GPSMAP 78 Series Owner ’s Manual 7 Navigating with W aypoints and Routes Routes A route is a sequence of waypoints that leads you to your nal destination. Creating a Route 1. From the main menu, select > > .
8 GPSMAP 78 Series Owner’s Manual Navigating with W aypoints and Routes • —adds an additional point on the route. The additional point is inserted before the point you are editing. • —removes the point from the route.
GPSMAP 78 Series Owner ’s Manual 9 Navigating with W aypoints and Routes Additional Maps T o purchase preloaded detailed map data cards, go to http://buy .garmin.com or contact your Garmin dealer . Finding an Address with City Navigator ® Y ou can use optional City Navigator maps to search for addresses, cities, and other locations.
10 GPSMAP 78 Series Owner ’s Manual T racks T racks About T racks Y our Garmin device records a track log while you are moving. Y ou can save these tracks and navigate to them later . Y ou can view archived or loaded tracks by selecting from the main menu.
GPSMAP 78 Series Owner ’s Manual 1 1 T racks Viewing the Current T rack The track being recorded is called the current track. 1. From the main menu, select > . 2. Select an option: • —shows the current track on the map.
12 GPSMAP 78 Series Owner ’s Manual Using the Main Pages Using the Main Pages The information needed to operate this device is found on the following pages: map, compass, main menu, and trip computer . Customizing the Data Fields Y ou can customize the data elds that appear on the main pages.
GPSMAP 78 Series Owner ’s Manual 13 Using the Main Pages Measuring Distance Y ou can move the cursor around the map to measure distance from the current location. 1. From the map, press . 2. Select .
14 GPSMAP 78 Series Owner ’s Manual Using the Main Pages • —allows you to enable or disable the maps currently loaded on the device.
GPSMAP 78 Series Owner ’s Manual 15 Using the Main Pages Using the Compass Y ou can use the compass to navigate an active route. 1. Press . 2. Hold the device level. 3. Follow the bearing pointer to your destination. Using Sight ‘N Go : Sight ‘N Go is available only with the GPSMAP 78S and GPSMAP 78Sc.
16 GPSMAP 78 Series Owner ’s Manual Using the Main Pages ◦ —sets grid north as the heading reference (0°). ◦ —sets the magnetic variation value. • —allows you to select how the course is displayed.
GPSMAP 78 Series Owner ’s Manual 17 Using the Main Pages Elevation Plot Setup Options From the elevation plot, press . • —sets the type of data shown on the elevation plot: ◦ —records elevation changes over a period of time.
18 GPSMAP 78 Series Owner ’s Manual Using the Main Pages T rip Computer The trip computer displays your current speed, average speed, maximum speed, trip odometer , and other helpful statistics. T rip Computer Setup Options From the trip computer , press .
GPSMAP 78 Series Owner ’s Manual 19 Main Menu Features and Settings Main Menu Features and Settings Geocaches Geocaching is a type of treasure hunting, in which geocachers seek hidden treasures using GPS coordinates posted on the Internet by those hiding the geocache.
20 GPSMAP 78 Series Owner ’s Manual Main Menu Features and Settings Proximity Alarms Proximity alarms alert you when you are approaching a predetermined area. Setting a Proximity Alarm 1. From the main menu, select .
GPSMAP 78 Series Owner ’s Manual 21 Main Menu Features and Settings Satellite The satellite page shows your current location, GPS accuracy , satellite locations, and signal strength. Satellite Settings From the satellite page, press . • —allows you to turn the GPS on and off.
22 GPSMAP 78 Series Owner ’s Manual Main Menu Features and Settings • —sets an audible alarm. If you are not currently using the device, you can set the device to turn on at a specic time.
GPSMAP 78 Series Owner ’s Manual 23 Customizing Y our Device Customizing Y our Device Customizing Data Fields Y ou can customize the data elds displayed on each main page. 1. From a main page, press . 2. Select .
24 GPSMAP 78 Series Owner ’s Manual Customizing Y our Device Data Field Description Depth The depth of the water . Requires a connection to a NMEA 0183 depth-capable device to acquire data ( page 27 ). **Descent - Average The average vertical distance of descent.
GPSMAP 78 Series Owner ’s Manual 25 Customizing Y our Device Data Field Description Location (lat/lon) Displays the current position in the default position format regardless of the selected settings. . Location (selected) Displays the current position in the selected position format.
26 GPSMAP 78 Series Owner ’s Manual Customizing Y our Device Data Field Description T ime to Destination The estimated time needed to reach your nal destination. T ime to Next The estimated time needed until you reach the next waypoint on the route.
GPSMAP 78 Series Owner ’s Manual 27 Customizing Y our Device System Settings From the main menu, select > . • —sets the GPS to .
28 GPSMAP 78 Series Owner ’s Manual Customizing Y our Device Display Settings From the main menu, select > . • —see page 38 . • —see page 37 .
GPSMAP 78 Series Owner ’s Manual 29 Customizing Y our Device • —allows you to turn spot soundings on and set dangerous depths. • —displays the sector in which a navigational light is visible.
30 GPSMAP 78 Series Owner ’s Manual Customizing Y our Device Setting the Deep W ater or Shallow W ater Alarm 1. From the main menu, select > > . 2.
GPSMAP 78 Series Owner ’s Manual 31 Customizing Y our Device Adding a Page 1. From the main menu, select > . 2. Select . 3. Select a page to add. Removing a Page 1. From the main menu, select > .
32 GPSMAP 78 Series Owner ’s Manual Customizing Y our Device • —sets the position format in which a given location reading appears. • —sets the coordinate system on which the map is structured.
GPSMAP 78 Series Owner ’s Manual 33 Customizing Y our Device ◦ —records ambient pressure changes over a period of time. Geocache Settings From the main menu, select > .
34 GPSMAP 78 Series Owner ’s Manual Customizing Y our Device ◦ —routes you to the next point on the route when you are within a specied distance of your current point. • —allows you to select the road type you want to avoid.
GPSMAP 78 Series Owner ’s Manual 35 Appendix Appendix Registering Y our Device Help us better support you by completing our online registration today . • Go to http://my .garmin.com . • Keep the original sales receipt, or a photocopy , in a safe place.
36 GPSMAP 78 Series Owner ’s Manual Appendix • In Europe, go to www .garmin.com /support and click for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241. Using the Backlight The backlight is activated any time you press a button.
GPSMAP 78 Series Owner ’s Manual 37 Appendix Radio frequency/ protocol 2.4 GHz/ANT+ wireless communications protocol GPS accuracy < 33 ft. (10 m) 95% typical use GPS is subject to accuracy degradation to 100 m 2DRMS under the U.S. DoD imposed Selective Availability (SA) Program when activated.
38 GPSMAP 78 Series Owner ’s Manual Appendix 2. Use the to adjust the brightness. Adjusting the Backlight Timeout From the main menu, select > > .
GPSMAP 78 Series Owner ’s Manual 39 Appendix Using Optional Fitness Accessories : The Fitness option is available only with the GPSMAP 78S and GPSMAP 78Sc. Before you can use the tness accessory with your device, you must install the accessory according to the instructions that are included with the accessory .
40 GPSMAP 78 Series Owner ’s Manual Appendix recognizes the ANT+ accessory each time it is activated. This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the accessories are activated and functioning correctly .
GPSMAP 78 Series Owner ’s Manual 41 Appendix microSD card slot 4. Push in and slide up the metal cover . 5. Replace the batteries and the battery cover . Removing a microSD Card 1. Slide down and pull out the metal cover . 2. Remove the card from the slot.
42 GPSMAP 78 Series Owner ’s Manual Appendix Mini-USB port under weather cap Serial port under weather cap microSD card slot (inside battery compartment) 3.
GPSMAP 78 Series Owner ’s Manual 43 Appendix Deleting Files notice Y our device memory contains important system les and folders that should not be deleted. Before you can delete les, you must connect the device to your computer ( page 40 ). 1.
44 GPSMAP 78 Series Owner ’s Manual Appendix Caring for the Device notice A void chemical cleaners and solvents that can damage plastic components. Cleaning the Device 1. Use a cloth dampened with a mild detergent solution. 2. W ipe it dry . Cleaning the Screen 1.
GPSMAP 78 Series Owner ’s Manual 45 Appendix T roubleshooting Problem Solution The screen or buttons do not respond. How do I reset the device? 1. Remove the batteries. 2. Reinstall the batteries. NOTE : This does not erase any of your data or settings.
46 GPSMAP 78 Series Owner ’s Manual Appendix Problem Solution I cannot see any new removable drives in my list of drives. If you have several network drives mapped on your computer , Windows may have trouble assigning drive letters to your Garmin drives.
GPSMAP 78 Series Owner ’s Manual 47 Index Index A accessories 38 46 tness 39 microSD card 39 acquiring satellite signals 45 active route 8 alarms marine 29 proximity 20 time 22 altimeter c.
Index 48 GPSMAP 78 Series Owner ’s Manual settings 28 display settings backlight 37 downloading software 35 E editing proles 34 routes 7 waypoints 6 elevation plot 1 1 16 barometric altime.
GPSMAP 78 Series Owner ’s Manual 49 Index P P AGE button 5 pages adding a page 31 removing 31 sequence 30 position format 31 power button 3 4 36 37 proles 20 change 20 creati.
Index 50 GPSMAP 78 Series Owner ’s Manual recording 10 saving 1 1 viewing 10 transferring les 42 using USB 42 wirelessly 19 trip computer 18 troubleshooting 45 U unit ID 35 updating software 35 U.
.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www .garmin.com . © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
An important point after buying a device Graco 78 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 78 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 78 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 78 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 78 will certainly help you make a decision on the purchase.
If you already are a holder of Graco 78, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 78.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 78. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 78 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
