Instruction/ maintenance manual of the product OHDHR Hammer Strength
Go to page of 15
OL YMPIC HEA VY DUTY HALF RACK (OHDHR) Part # 7671201 Rev . A Revision:12/12/03 1 ASSEMBL Y INSTRUCTIONS.
P AR TS LIST PA R T # LEA 7664801 LEA 7665001 LEA 7665101 LEA 7584901 LEA 7665501 LEA 7586601 LEA 7622401 LEA 7663901 LEA 7584401 LEA 7584501 LEA 7587501 LEA 7587901 LEA 7587801 LEA 7605901 KEY 1 2 3 .
3 16 1/2 X 1-1/2” BOL T 20 3/8” INT TOOTH LOCK W ASHER 19 1/2” INT TOOTH LOCK W ASHER 25 1/2 X 4-1/4” BOL T 17 3/8 X 3-3/4” FLA T HEAD BOL T 23 3/8” LOCK NUT 22 1/2” LOCK NUT 18 1/2” F.
STEP 1: FIGURE 1 4 • LOOSEL Y assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (25), two 1/2” PLASITC DOME W ASHERS (21), two 1/2” INT TOOTH LOCK W ASHERS (19) and two 1/2” LOCK NUTS (22) as shown in FIGURE 1.
5 STEP 2: FIGURE 2 • LOOSEL Y assemble the BOTT OM UPRIGHT SUPPOR T (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (25), four 1/2” PLASITC DOME W ASHERS (21), four 1/2” INT TOOTH LOCK W ASHERS (19) and four1/2” LOCK NUTS (22) as shown in FIGURE 2.
6 STEP 3: FIGURE 3 • LOOSEL Y assemble the LEFT UPRIGHT SUPPOR T (3) to the LEFT UPRIGHT BASE (1) and REAR UPRIGHT (4) using four 1/2 X 4-1/4” BOL TS (25), four 1/2” PLASITC DOME W ASHERS (21), four 1/2” INT TOOTH LOCK W ASHERS (19) and four 1/2” LOCK NUTS (22) as shown in FIGURE 3.
7 STEP 4: FIGURE 4 • LOOSEL Y assemble the PULL-UP SUPPOR T (8) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (25), four 1/2” PLASTIC DOME W ASHERS (21), four 1/2” INT TOOTH LOCK W ASHERS (19) and four 1/2” LOCK NUTS (22) as shown in FIGURE 4.
8 STEP 5: FIGURE 5 • LOOSEL Y assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) and REAR UPRIGHTS (4) using eight 1/2 X 4-1/4” BOL TS (25), eight 1/2” PLASTIC DOME W ASHERS (21), eight 1/2” INT T OOTH LOCK W ASHERS (19) and eight 1/2” LOCK NUTS (22) as shown in FIGURE 5.
9 STEP 6: FIGURE 6 • Securely tighten all loose frame connections made to this point. TIGHTEN BOTH SIDES! TIGHTEN BOTH SIDES!.
10 STEP 7: FIGURE 7 • LOOSEL Y assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight 3/8 X 3-3/4” FLA T HEAD BOL TS (17), eight 3/8” INT T OOTH LOCK W ASHERS (20) and eight 3/8” LOCK NUTS (23).
11 STEP 8: FIGURE 8 • SECUREL Y assemble the ten WEIGHT HORNS (11) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOL TS (25), twenty 1/2” INT TOOTH LOCK W ASHERS (19), twenty 1/2” PLASTIC DOME W ASHERS (21) and twenty 1/2” LOCK NUTS (22) as shown in FIGURE 8.
12 STEP 9: FIGURE 9 • Assemble two SWIVEL SPOTTERS (24) to the BOTTOM UPRIGHT SUPPOR T (15) as shown using four 1/2 X 1-1/2” BOL TS (16), four 1/2” INT TOOTH LOCK W ASHERS (19), four 1/2” FLA T W ASHERS (18) and four 1/2” LOCK NUTS (22). See FIGURE 9.
13 STEP 10: FIGURE 10 • Insert the LEFT BAR SUPPOR T (12) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock in place. See FIGURE 10. 10 13 12 • Repeat the above step to assemble the RIGHT BAR SUPPOR T (13) to the RIGHT ADJUSTMENT RACK (9).
14 STEP 1 1: FIGURE 1 1 7 9 10 14 Thank you for pur chasing the OL YMPIC HEA VY DUTY HALF RACK. If unsur e of proper use of equipment, call your local Hammer S trength distributor . SERIAL NUMBER • Insert the LEFT BAR CA TCH (7) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock in place.
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative.
An important point after buying a device Hammer Strength OHDHR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hammer Strength OHDHR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hammer Strength OHDHR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hammer Strength OHDHR you will learn all the available features of the product, as well as information on its operation. The information that you get Hammer Strength OHDHR will certainly help you make a decision on the purchase.
If you already are a holder of Hammer Strength OHDHR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hammer Strength OHDHR.
However, one of the most important roles played by the user manual is to help in solving problems with Hammer Strength OHDHR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hammer Strength OHDHR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
