Instruction/ maintenance manual of the product 32222 Harbor Freight Tools
Go to page of 13
3-1/4" PL ANER ASSEMBL Y and OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 9301 1 Copyright © 1997 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools.
SPECIFICA TIONS Item # 32222 Motor 5 a m ps @ 1 1 0 V , 60Hz Rate 34,000 CPM Planing Width 3-1/4" Max. Planing Depth 1/10" Max. Rabbeting Depth 25/64" T ool Weight 6-1/4 lbs.
8. USE EYE AND EAR PROTECTION. Always wear ANSI approved chemical splash goggles when working with chemicals. Always wear ANSI approved impact safety goggles at other times.
21 . REMOVE FOREIGN OBJECTS FORM STOCK. All nails, screws, and all other hardware must be removed from wood before planing. Never allow planer to come in contact with any metal when operating. This will chip the blades. 22 . DO NOT LEA VE BLADE EXPOSED WHEN NOT IN USE.
EXTENSION CORDS Y our tool has a three prong plug, therefore you must use a three- prong extension cord. Only use rounded jacket extension cords listed by the Underwriters Laboratories (UL). If you are using the tool outdoors, you must use an extension cord rated for outdoor use.
OPERA TIONS Basic Procedures S tep 1: Bring cutterhead up to full speed before engaging stock. S tep 2: The TRIGGER (#40) can be locked on using the T rigger Lock Button as shown in Figure #1. See Safety W arnings and Precautions #26. S tep 3: Use the Rear Handle to gently push the Planer .
Fence Use and Installation S tep 1: The FENCE (#65) can only be used when edge of stock is flat and at a 90° angle to the surface being plane. S tep 2: The Fence must be used to engage is Rabbeting Procedures (see below). S tep 3: T o install the FENCE, first loosen the front KNOB (#61) by turning it counterclockwise.
Rabbeting S tep 1: Install FENCE as described above S tep 2: Determine the width of the desired rabbet. S tep 3: Using a ruler or other suitable device, set the fence so that only the necessary amount of the cutterhead will plane the stock. S tep 4: Set the DEPTH KNOB to the desired cutting depth.
S tep 5: Mount the BLADE to the SHARPENING JIG (#63) as shown in Figure 4. S tep 6: Use the angle to keep the edge correct as shown by the arrow . S tep 7: Sharpen by hand using a fine, metal file or a whetstone. S tep 8: Remove BLADE from the SHARPENING JIG .
Pulley Replacement S tep 1: Remove the SCREW (#29) and the BEL T COVER (#57). (See figure 7.) Pulley (# 54) Scre w (# 29) Belt Co ver (# 51) Belt (# 56) Pulley (# 55) Figure 7 — Removing the Pulley S tep 2: Remove the BEL T (#56). S tep 3: Replace BEL T .
TROUBLE SHOOTING PROBLEM PROBABLE CAUSE SOLUTION Planer will not start Not plugged in Plug in. Fuse or circuit blown Replace fuse or reset circuit Socket T est socket with current tester of try another tool in socket. If socket does not function properly , have it replaced by a qualified technician.
P ARTS LIST N O . DESCRIPTION 1 Housing Assembly 2 Set Screw 3 Brush Holder 4 S t ator Assembly 5 Brush T erminal 6 Grounding W asher 7 Lock W asher 8 Machine Screw 1 2 Armature Assembly 14 Ball Beari.
EXPLODED VIEW DRA WING Page 13 -- SKU: 32222.
An important point after buying a device Harbor Freight Tools 32222 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 32222 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 32222 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 32222 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 32222 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 32222, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 32222.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 32222. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 32222 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center