Instruction/ maintenance manual of the product 41209 Harbor Freight Tools
Go to page of 14
COIL ROOFING NAILER 7/8” T O 1-3/4” F ASTENER LENGTH CAP A CITY Model 41209 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INSTRUCTIONS BEFORE USE.
Page 2 SKU 41209 For technical questions, please call 1-800-444-3353. Specifications Save This Manual Y ou will need this man ual f or the saf ety w ar nings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Page 3 SKU 41209 For technical questions, please call 1-800-444-3353. ment to do the work of a larger industr ial tool. There are cer tain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended.
Page 4 SKU 41209 For technical questions, please call 1-800-444-3353. damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may aff ect proper oper ation.
Page 5 SKU 41209 For technical questions, please call 1-800-444-3353. 26. Stay within air pressure capacity . Ne v er oper ate the Nailer abov e 100 PSI. 27. Hold tool a way fr om head and bod y . D uring oper ation the Nailer may kick bac k causing injur y .
Page 6 SKU 41209 For technical questions, please call 1-800-444-3353. Note: T o connect this tool, w e recommend you use the included quic k connector . For smoother operation and to extend the life-span of the tool, put 3-5 drops of pneumatic tool oil in the attached Air Plug (17) bef ore each use .
Page 7 SKU 41209 For technical questions, please call 1-800-444-3353. 5. Connect the air supply to the tool at the Air Plug (17). Set the regulator at the recommended 65 PSI to 100 PSI . Do not to go over the maximum 100 PSI. 6. T est the tool b y depressing the nose against the wor kpiece without pulling the T rigger (42).
Page 8 SKU 41209 For technical questions, please call 1-800-444-3353. 2. Check the Magazine P ost (95) inside the Magazine (92). The Magazine P ost can be adjusted up and down to use various lengths of nails from 7/8” to 1-3/4”: A. 7/8” Long Nails (Use top setting).
Page 9 SKU 41209 For technical questions, please call 1-800-444-3353. 3. Place a coil of nails (not included) around the Magazine Post (95) in the Magazine (92).
Page 10 SKU 41209 For technical questions, please call 1-800-444-3353. 3. W ARNING: When the T rigger (42) is depressed, the Roofing Nailer will fire if the Nose of the tool comes in contact with anything. 4. Do not press the Nose (72) of the Roofing Nailer against the work surface with extr a f orce .
Page 11 SKU 41209 For technical questions, please call 1-800-444-3353. Clearing Jams 1. Occasionally a nail may become jammed in the firing mechanism of the Roofing Nailer , making the tool inoperab l e . 2. T o remo ve a jammed nail, disconnect the Roofing Nailer from its compressed air supply .
Page 12 SKU 41209 For technical questions, please call 1-800-444-3353. Please Read the Following Carefully THE MANUF A CTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P AR TS LIST AND ASSEMBL Y DIA GRAM IN THIS MANU AL AS A REFERENCE TOOL ONL Y .
Page 13 SKU 41209 For technical questions, please call 1-800-444-3353. P ARTS LIST NOTE: Some par ts are listed and shown f or illustration purposes only , and are not a vailable individuall y as replacement parts.
Page 14 SKU 41209 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIA GRAM NOTE: Some par ts are listed and shown f or illustration purposes only , and are not a vailable individuall y as replacement parts.
An important point after buying a device Harbor Freight Tools 41209 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 41209 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 41209 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 41209 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 41209 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 41209, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 41209.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 41209. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 41209 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center