Instruction/ maintenance manual of the product 46407 Harbor Freight Tools
Go to page of 6
WOOD LA THE ST AND Model 46407 SET UP AND OPERA TING INSTRUCTIONS Designed for Harbor Freight T ools ® Wood Lathe #36066 Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein.
SKU 46407 Page 2 Specications Overall Dimensions 56” L x 18” W x 31-1/8” H Base Mounting Holes 4, .39” holes @ 8-1/2” apart from center Leg Distance 49” x 15” with .
SKU 46407 Page 3 plications for which this Lathe Stand was designed. Do not modify this Lathe Stand and do not use this tool for a purpose for which it was not intended. Stay alert . W atch what you are doing, use common sense. Do not use any Lathe Stand when you are tired.
SKU 46407 Page 4 Assembly Refer to the Assembly Drawing on page 6. Note: The only tool necessary is an adjustable wrench. It is advised to always tighten hardware by hand until the unit is complete, then tighten with the wrench.
SKU 46407 Page 5 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P AR TS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 46407 Page 6 Assembly Drawing.
An important point after buying a device Harbor Freight Tools 46407 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 46407 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 46407 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 46407 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 46407 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 46407, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 46407.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 46407. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 46407 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center