Instruction/ maintenance manual of the product 47003 Harbor Freight Tools
Go to page of 18
14” HEA VY DUTY CUT -OFF SA W Model 47003 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.com Cop yright © 2004 by Harbor F reight T ools ® . All r ights reser ved.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the saf ety warnings and precautions, assemb ly , oper- ating, inspection, maintenance and cleaning procedures, par ts list and assemb ly diagram. K eep your in v oice with this manual.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. PERSONAL SAFETY 1. Stay alert.
2. Do not fo rce the tool. Use the correct tool for y our application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.
break down, grounding provides a low resistance path to carry electricity away from the user . 2. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug.
resistance path to carr y electr icity aw a y from the user, reducing the risk of elec- tric shock. (See Figure A.) 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool.
5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure B.) 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable f or outdoor use.
SPECIFIC SAFETY R ULES 1. Maintain labels and nameplates on the Cut-Off Saw . These carr y impor tant information. If unreadable or missing, contact Harbor F reight T ools f or a replace- ment. 2. K eep hands and fing er s awa y from cutting area and Cut-Off Wheel.
SKU 47003 P AGE 9 10. T o av oid accidental injury , al ways wear hea vy duty w ork gloves and w ork bib when changing a Cut-Off Wheel. 11. Before using the Cut-Off Sa w , make sure the Cut-Off Wheel is properl y mounted on the Saw Spindle. Make sure the Cut-Off Wheel is balanced, and is not cracked or bent.
20. W ARNING! P eople with pacemakers should consult their ph ysician(s) before using this product. Operation of electrical equipment in close proximity to a hear t pacemaker could cause interf erence or failure of the pacemak er .
SKU 47003 P AGE 11 3. Unscrew and remove the Guard Retainer Screw (62). (See Figure D.) 4. Remov e the Swing Guard (61). Then, set the Swing Guard aside, making sure not to allow it to be bent or damaged; that can interfere with proper guard oper a- tion.
SKU 47003 P AGE 12 LOCK PIN (40) FIGURE F 6. Use the 8mm He x Wrench (76) to remov e the Screw (60). NO TE: Make sure to turn the Screw counterclockwise to remov e. (See Figure G.) 7. Remov e the Small Flange (59). Then, remov e the Outer Flange (58).
SKU 47003 P AGE 13 The Quic k Loc k Vise: 1. The Quick Loc k Vise allows f or the angle of cut to be adjusted from 0 to 45 de- grees to the left and 0 to 45 degrees to the right. T o adjust the angle of cut, loosen the two Scre ws (15). Mov e the Fixed Clamp (3) to the desired angle as indicated by the line on the Base (2) of the Cut-Off Sa w .
SKU 47003 P AGE 14 3. Plug the Power Cord (65) into the nearest 120 volt, grounded, electrical outlet. Depress the Safety Button (80) with your thumb, and squeeze the Power Switch (74) on the Handle (66, 71). Then, release the Safety Button. (See Figure J.
SKU 47003 P AGE 15 9. Once the cut is completed, turn off the Cut-Off Saw by releasing the P ow er Switch (74). This allows the Saf ety Button (80) to retur n to the “OFF” position.
SKU 47003 P AGE 16 PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P ARTS LIST AND ASSEMBL Y DIA GRAM IN THIS MANU AL AS A REFERENCE TOOL ONL Y .
P AR TS LIST NO TE: Some par ts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. SKU 47003 P AGE 17 Part # Description Qty.
NO TE: Some par ts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. ASSEMBL Y DIA GRAM SKU 47003 P AGE 18.
An important point after buying a device Harbor Freight Tools 47003 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 47003 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 47003 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 47003 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 47003 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 47003, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 47003.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 47003. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 47003 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center