Instruction/ maintenance manual of the product 90310 Harbor Freight Tools
Go to page of 5
DUPLEX RABBET & FILLISTER PLANE ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .
Page 2 SKU 90310 Specifications Save This Manual Y ou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. W rite the invoice number on the inside of the front cover .
Page 3 SKU 90310 9. Maintain tools with care . Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. The handle must be kept clean, dry , and free from oil and grease at all times. 10.
Page 4 SKU 90310 Operation Refer to the Assembly Drawing on page 5 and FIGURE 1 below . Note : The front blade (fillister) is stationary and the rear blade is movable and replaceable. 1. T o change or replace Blades, turn the Blade Removal Knob (see below) counterclockwise and lift off the blade holder (see below).
Page 5 SKU 90310 NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P AR TS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
An important point after buying a device Harbor Freight Tools 90310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 90310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 90310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 90310 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 90310 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 90310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 90310.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 90310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 90310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center