Instruction/ maintenance manual of the product 93211 Harbor Freight Tools
Go to page of 8
4” T ABLE SA W WITH 2 BLADES 9321 1 ASSEMBL Y AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2005 by Harbor Freight T ools ® .
Page 2 SKU 9321 1 For technical questions, please call 1-800-444-3353. Motor 120 V olts AC /60 Hz / 90 W atts / 1 / 8 HP / 14,000 no load RPM 14,000 RPM Minimum Accessory Rating Depth of Cut 3/4” T .
Page 3 SKU 9321 1 For technical questions, please call 1-800-444-3353. 7. Dress properly . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working.
Page 4 SKU 9321 1 For technical questions, please call 1-800-444-3353. cessories intended for use with this tool. Approved accessories are available from Harbor Freight T ools.
Page 5 SKU 9321 1 For technical questions, please call 1-800-444-3353. Important BEFORE rst use, the Guard (4) and Eye Guard (5) must be properly installed. 1. Remove the Screw (6) at the end of the Guard (4). Align the hole in the center of the Eye Guard (5) with the hole in the Guard (4).
Page 6 SKU 9321 1 For technical questions, please call 1-800-444-3353. Operation 1. Place your T able Saw on a at, level surface capable of supporting weight of T able Saw and material being cut before use. Always wear ANSI-approved safety goggles when operating this tool and ensure that all guards are in place and in proper working order .
Page 7 SKU 9321 1 For technical questions, please call 1-800-444-3353. Parts List Part Description Qty . Part Description Qty . 1 Guard Bracket 1 17 Motor Base 1 2 W asher 4 18 Power Switch 1 3 Screw .
Page 8 SKU 9321 1 For technical questions, please call 1-800-444-3353. Assembly Drawing NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
An important point after buying a device Harbor Freight Tools 93211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93211 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93211 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93211.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center