Instruction/ maintenance manual of the product 95621 Harbor Freight Tools
Go to page of 6
ROLLER ST AND WITH TWO-LEG SUPPOR T ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .
SKU 95621 P age 2 Specifications Over all Dimensions 17” L x 19” W x 42-3/4” H (fully e xtended) W eight Capacity 132 lbs. Adjustable Height 26-3/4” to 42-3/4” H with positive stops Material Steel Square and Round T ubing Ther moplastic Rubber Shoes F oldable Design Ball Bearing Roller 11-1/4” L Net W eight 9.
SKU 95621 P age 3 6. Use the right tool for the job . Do not attempt to f orce a small tool or attachment to do the work of a larger industrial tool. There are cer tain applications f or which this tool was designed. Do not modify this tool and do not use this tool f or a pur pose for which it w as not intended.
SKU 95621 P age 4 Unpacking When unpacking, chec k to make sure all parts listed on Page 6 are included. If any parts are missing or broken, please call Harbor F reight T ools at the number on the cov er of this manual. Assembl y 1. Use a wrench (not included) to f asten each Base Bar (2) to each Suppor t Leg (1).
SKU 95621 P age 5 Extendable Arm (5) Roller Head (4) Adjusting Handle (3) 5. Slide a Small Screw (7) through a Small Washer (9) and use them to f asten the Roller Head (4) to the top of the Extendable Arm. Tighten with a Small Nut. (11). Make sure the Scre w fits all the wa y through the Ar m and that the Roller Head (4) is f astened tight.
SKU 95621 P age 6 P ar ts List and Diagram NOTE : Some parts are listed and shown for illustration purposes only and are not av ailable individually as replacement par ts.
An important point after buying a device Harbor Freight Tools 95621 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95621 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95621 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95621 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95621 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95621, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95621.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95621. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95621 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center