Instruction/ maintenance manual of the product 97092 Harbor Freight Tools
Go to page of 4
HIGH REACH ROPE CHAIN SA W Model 97092 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2 SKU 97092 For technical questions, please call 1-800-444-3353. Do not overreach. Keep proper footing and balance at all times. Do not use this 5. product on a ladder . This enables better control of the Chain Saw in unexpected situations. Store idle Chain Saws out of the reach of children and do not allow per- 6.
Page 3 SKU 97092 For technical questions, please call 1-800-444-3353. Move as far away from the cutting area as the Extension Ropes allows. Con- 5. nect the Handles (1) to the ends of the Extension Ropes.
Page 4 SKU 97092 For technical questions, please call 1-800-444-3353. MAINTENANCE AND SERVICING Damaged equipment can fail, causing serious personal injury .
An important point after buying a device Harbor Freight Tools 97092 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 97092 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 97092 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 97092 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 97092 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 97092, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 97092.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 97092. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 97092 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center