Instruction/ maintenance manual of the product 97525 Harbor Freight Tools
Go to page of 11
AIR NAILER/ST APLER 2-IN-1 KIT Model 97525 ASSEMBL Y AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2007 by Harbor Freight T ools ® .
SKU 97525 Page 2 For technical questions, please call 1-800-444-3353. Specications Air Inlet 1/4” - 18 NPT Recommended Air Pressure 60 - 100 PSI, 100 PSI Max. Magazine Capacity 100 Nails or 80 Staples Safety Feature Single Sequential Safety T rip Mechanism Nail Size .
SKU 97525 Page 3 For technical questions, please call 1-800-444-3353. 8. Use eye and ear protection . Always wear ANSI-approved impact safety goggles and appropriate hearing protection. Wear a full face shield if you are producing metal lings or wood chips.
SKU 97525 Page 4 For technical questions, please call 1-800-444-3353. heating up. Otherwise, the extension cord could melt and catch re, or cause electrical damage to the tool.
SKU 97525 Page 5 For technical questions, please call 1-800-444-3353. Unpacking When unpacking, check to make sure the parts listed on page 9 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual as soon as possible.
SKU 97525 Page 6 For technical questions, please call 1-800-444-3353. 3. Empty the magazine of nails or staples. 4. Check that the T rigger (38) and the Safety (42) on the nose of the tool, move freely , without sticking.
SKU 97525 Page 7 For technical questions, please call 1-800-444-3353. Anytime any maintenance or repairs are done (including clearin g jams), FIRST : 1.
SKU 97525 Page 8 For technical questions, please call 1-800-444-3353. T roubleshooting Guide Stop using the Nailer/Stapler immediately if any of the following problems occur . Repairs and part replacements must be done only by a qualied technician.
SKU 97525 Page 9 For technical questions, please call 1-800-444-3353. Maintenance W arning! Always disconnect the tool from the air compressor and then empty the magazine of nails or staples before attempting to inspect or perform maintenance to the Nailer/ Stapler .
SKU 97525 Page 10 For technical questions, please call 1-800-444-3353. Assembly Drawing NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 97525 Page 1 1 For technical questions, please call 1-800-444-3353. 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability stand.
An important point after buying a device Harbor Freight Tools 97525 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 97525 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 97525 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 97525 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 97525 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 97525, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 97525.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 97525. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 97525 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center