Instruction/ maintenance manual of the product 99621 Harbor Freight Tools
Go to page of 8
12 VOL T , 80 LB. A TV SPREADER 99621 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
SKU 99621 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 99621 For technical questions, please call 1-800-444-3353. Page 3 9. Wear thick jeans and steel-toed work boots to help prevent injury caused by ying debris. Stay alert - W atch what you are 10. doing. Use common sense. Do not operate A TV Spreader when you are tired.
SKU 99621 For technical questions, please call 1-800-444-3353. Page 4 UNP ACKING When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 99621 For technical questions, please call 1-800-444-3353. Page 5 How to Attach to your A TV Place the A TV Spreader (assembled), 1. centered on the front, or rear luggage rack of your A TV . Use the J-Bolts (34), Press Plate (33) and Hex Nuts (32) to connect Frame Rail (21) to the luggage rack cross bar closest to the seat, or handlebars.
SKU 99621 For technical questions, please call 1-800-444-3353. Page 6 Empty the Hopper Assembly and 9. re-weigh the material. By taking note of how much material you used and how wide the spreading area was, you can gure the correct rate of spread.
SKU 99621 For technical questions, please call 1-800-444-3353. Page 7 T roubleshooting Problem Possible Causes Likely Solutions Control Handle will not open/close Gauge Assembly . Material clogging port of Gauge 1. Assembly (22) and/or Adjustment Plate (13).
SKU 99621 For technical questions, please call 1-800-444-3353. Page 8 ASSEMBL Y DIAGRAM REV 08g Harness Connector.
An important point after buying a device Harbor Freight Tools 99621 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 99621 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 99621 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 99621 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 99621 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 99621, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 99621.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 99621. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 99621 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center