Instruction/ maintenance manual of the product K9/Prisoner Transportation System KK-K9-F14-K-PT Havis-Shields
Go to page of 9
INSTALL INSTRUCTIONS KK-K9-F14-K-PT K9/PRISONER TRANSPO RTATION SYSTEM 2003-2009 FORD EXPEDITION HARDWARE: QTY: DESCRIPTION: PART #: 28 ¼-20 x ½” Stainless carriage bolt GSM32022 8 ¼-20 x ¾” S.
KK-K9-F14-K-PT_INST _11-08 2 FORD EXPEDITION K9/PT COMBO KIT Upper passenger side filler panel Rear passenger side filler panel Lower passenger side filler panel Rear floor mount bracket Front passeng.
KK-K9-F14-K-PT_INST _11-08 3 Remove plastic trim piece. Metal clips hold on trim Remove window/lock switch assembly from door View of Expedition door panel Remove hex head screws holding lower section.
4 KK-K9-F14-K-PT_INST _11-08 2006-2008 FORD EXPEDITION DOOR Leave passenger-side rear seat Attach the rear floor mount bracket to the K9 housing with ¼ x ½ bolts. Slide K9 section of assembly through back hatch of vehicle. Be careful not to rip headliner or scratch trim panels.
Note: Mounting plate straddles a ridge in the floor. When bolts KK-K9-F14-K-PT_INST _11-08 5 are tightened the plate will fo rm to the floor. View of mounting foot from floor of K9 Adjust mounting foo.
KK-K9-F14-K-PT_INST _11-08 6 View of assembly at this time Place front partition filler panel into vehicle as shown above Position front partition as shown and attach to K9 housing assembly Remove “B” pillar upper trim panel.
KK-K9-F14-K-PT_INST _11-08 7 Attach “B” pillar mounting bracket to front partition using ¼” x ¾” carriage bolts and nuts Install “B” pillar mounting bracket using bolts that hold grab handle.
8 KK-K9-F14-K-PT_INST _11-08 Pre-drill holes using 3/16” drill bit and attach using ¼”x 1” Lag bolts Attach rear partition to floor of vehicle. Location where ceiling filler bolts to rear parti.
KK-K9-F14-K-PT_INST _11-08 9 Hinge up window guard and reattach to bracket with 10-32 x ½” Stainless machine screws and #10 Flat washers. Standard door panel EL NOTE: Door panel fillers are provided f or the Expedition EL. This is not used for the standard length Expedition.
An important point after buying a device Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields K9/Prisoner Transportation System KK-K9-F14-K-PT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
