Instruction/ maintenance manual of the product 341A Hayter Mowers
Go to page of 36
(English V ersion) FROM SERIAL NO: 340A001001, 341A001001 HANDBOOK: 340228 (REV .1.) ISSUE 09.9.03 OWNER'S HANDBOOK Harrier 56 CODES 340A 341A Electric Start (V ariable Speed) (Auto Drive).
3D340A1 1 14 12 10 13 11 4 5 7 8 9 18 16 17 2 3 6 15 Main Features Specifications MAIN FEA TURES /SPECIFICA TIONS 1.2 Code 340A 341A Engine Briggs & Stratton INTEK-55 Briggs & Stratton INTEK-55 Engine type 1 1 1682-0165-E1 1 1 1687-0166-E1 Engine/Cutterbar speed 2800 rpm 2900 rpm Fuel type Unleaded petrol Unleaded petrol Fuel capacity 1.
1ST Y ear (12 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Y ear (12 months) Owner s Name: Serial Number: Date: 2nd Y ear (24 months) W e.
.
1.2 Main Features/Specifications 1.5 Contents 1.6 Introduction 1.7 W arranty 1.8 - 1.1 1 Safety Pr ecautions 1.1 1 Safety Symbols 1.1 1 Decal Symbols 1.12 Assembling the Mower 1.12 - Delivery Checklist 1.12 - Handlebar 1.12 - Grassbag Attachment 1.13 Before Starting the Engine 1.
1.6 INTRODUCTION Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications.
LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie.
1.8 SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Car efully r ead the following and inform others. Y our mower is perfectly safe if used correctly . Failur e to observe the following precautions may r esult in serious injury .
1.9 PRECAUTIONS SAFETY - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
1.10 Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.
1.11 SAFETY PRECAUTIONS Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration.
1.12 ASSEMBLING THE MOWER Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 2. Grassbag. 3. Charger (341A) 4. Ignition Key (341A) T o prevent accidents cut off the long ribbon attached to the grass- bag and discard.
1.13 MOWER THE ST AR TING T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 30 oil.
1.14 Controls Operate all control levers several times and ensure that the cables move freely . Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position.
1.15 MOWER THE OPERA TING (Electric start Only) Stand behind the mower and hold the handlebar together with the engine stop lever . T urn the ignition key in a clockwise direction and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine.
1.16 T o prevent engine damage do not use the mower on slopes greater than 20 degrees. T o adjust the height of cut: Grip the lever and pull sideways to dis- engage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut.
1.17 Remove the grassbag and operate the mower with the rear deflector in the closed position. Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting.
1.18 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary .
1.19 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow .
1.20 Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass.
T o prevent accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . 1. Engine Cowl 2. Spark Plug / Lead 3. Carburetor 4. Exhaust Guard 5. Exhaust 6. Oil fill/Dipstick 7. Start Grip 8.
1.22 Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to- ‘ Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘ Maintenance Schedule ’ :- 1.
1.23 Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer .
Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings ar e particularly corrosive. Thoroughly clean the mower deck immediately after use on treat- ed grass and store well away fr om corrosive materials.
Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Drain the fuel by running the engine until the fuel tank is empty and the engine stops.
1.26 Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), and distance piece (3) and tighten to a torque of 54Nm A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance.
1.27 Storage T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam- aged through contact with the engine spark plug.
1.28 MOWER MAINTENANCE PREVENT ACCIDENTS: AL W A YS charge the battery in a well ventilated area. NEVER charge the battery near naked flames or direct heat. AL W A YS switch off the mains electricity supply befor e discon- necting the charger from the battery .
PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever . Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Battery discharged (341AOnly) Charge battery Engine smokes Excess oil level.
PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance.
1.31 CONFORMITY OF DECLARA TION VIBRA TION INFORMA TION Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the handlebars.
1.32 PA R T S LIST ITEM NO. 1 Belt 340049 1 1 2 Circlip - 5/8 ” 1428 1 1 3 W oodruff Key 1662 1 1 4 W asher - 3/16 ” 09257 4 4 5 Spring 5421 2 2 6 Cutterblade 340015 1 1 7 W asher - Plain 5/8 ” 09286 1 1 8 Spring Clip -5/16 ” 04020 1 1 9 Bush - 1/2 ” x 5/8 ” x 3/4 ” 4452 1 1 10 Screw - M6 x 12 Csk.
43 Distance Piece 4014 1 1 44 W asher - Nylon 19mm 09688 2 2 45 Mainframe Assembly 340205V 1 1 46 Throwplate 34001 1 1 1 47 Idler Sprocket Sleeve Assembly 219095 1 1 48 Plate - Ratchet 340102 1 1 49 C.
1.34 PA R T S LIST ITEM NO. 83 Decal - Caution 219189 1 1 84 Handwheel 226013 2 2 85 Grassbag - Fabric 340071 1 1 86 Cable - Clutch 341034 1 1 87 Tube Plug 300160 2 2 88 Roller Bearing Housing 219102 .
45 96 63 3 18 9 52 77 1 340S/341S1 11 27 40 82 19 54 46 33 43 73 29 25 33 56 8 11 12 26 58 46 33 56 33 33 57 33 26 12 78 72 36 11 4 101 70 31 48 92 19 77 82 24 14 11 6 11 5 39 28 83 50 105 37 50 33 11.
Serial No: Engine T ype:- 11 1682-0165-E1 (340A) Engine:- Briggs & Stratton INTEK-55 Engine T ype:- 11 1687-0166-E1 (341A) Engine:- Briggs & Stratton INTEK-55 Date of Sale:- Y our Local Dealer:- 1.
An important point after buying a device Hayter Mowers 341A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hayter Mowers 341A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hayter Mowers 341A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hayter Mowers 341A you will learn all the available features of the product, as well as information on its operation. The information that you get Hayter Mowers 341A will certainly help you make a decision on the purchase.
If you already are a holder of Hayter Mowers 341A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hayter Mowers 341A.
However, one of the most important roles played by the user manual is to help in solving problems with Hayter Mowers 341A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hayter Mowers 341A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
