Instruction/ maintenance manual of the product CMP307XU Hitachi
Go to page of 32
PLASMA ◆ High resolution XGA (1024 x 768) ◆ 4:3 aspect ratio ◆ 160 degree viewing angle ◆ Theater operation (capable of 16 million colors) ◆ Multiscan capability (PC Analog RGB) ◆ Standard.
Model CMP307XU General Power supply Frequency Power consumption Dimensions Weight Display characteristics Effective display area Aspect ratio Number of pixels Pixel pitch Number of colors (gray levels.
ENGLISH FEA TURES Notes about This Manual • The information in this manual is subject to change without notice. • While meticulous care has been taken in the preparation of this manual, you are requested to notify your dealer or us should you have any comments, views or questions about our product.
FEA TURES 1 CONTENTS 2 SAFETY GUIDELINES 3 INST ALLA TION INSTRUCTIONS 7 Standard accessories 7 Installation 7 Anti-tumble measures 7 Component Names 8 Installation and Cabling 10 Handling the Remote .
ENGLISH SAFETY GUIDELINES This monitor is designed to be safe to use. However , due to high voltage of about 400 V , fire or serious injury may occur unless you use this monitor in correct way . Y ou are strongly suggested to follow the instruction shown below in order to avoid such injury .
ENGLISH Fire or electric shock may cause death or serious injury unless you follow the instruction. W arning ● If something smells strange or smoke comes from the monitor: T urn off the monitor and disconnect the power plug from the power point immediately .
ENGLISH Electric shock or other accidents may cause serious injury or damage to your property . Caution ● Y ou must to check the user manual of the computer when you connect to the monitor . The weight of the monitor or obstructing the ventilation hole of the computer equipment may cause distortion or damage of the computer equipment.
6 ENGLISH Precautions SAFETY GUIDELINES(continued) ● Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor .
7 ENGLISH ● T o preserve the performance of this product and to maintain safety , always use one of the special mount units for installation. Special mount units (options): W all Mount Unit (CMP AK04), Ceiling Mount Unit (CMP A T04) ■ Use one of the special mount units to install this product.
8 ENGLISH INST ALLA TION INSTRUCTIONS (continued) Remote-control sensor ST ANDBY(RED) ON (GRN) Front Cabinet (front frame) Stand 12 Panel Indicating lamp 13 Control panel RGB/VIDEO [VOLUME] SELECT MENU VOLUME button 14 MENU button 16 RGB/VIDEO button 14 SELECT button 16 ■ The Adjustment button is located on the bottom.
9 ENGLISH Remote controller POWER RECALL RGB/ VIDEO MUTE VOLUME MENU SELECT RGB/VIDEO button 14 POWER button 13 RECALL button 15 MUTE button 15 MENU button 16 VOLUME button 14 SELECT button 15 Externa.
10 ENGLISH INST ALLA TION INSTRUCTIONS (continued) Connecting to the PC Read Usage Notes ( to ) carefully to ensure maximum safety before proceeding to these steps: (1) Make sure that the display signals produced by your PC meet the specifications of this product.
11 ENGLISH Connecting to V ideo Equipment (such as a video disc player , a DVD player , or a video camera) S-VIDEO VIDEO1 INPUT VIDEO VIDEO2 INPUT [COMPONENT] P R /C R P B /C B YR L (MONO) AUDIO RL (M.
12 ENGLISH INST ALLA TION INSTRUCTIONS (continued) Loading Batteries (1) Open the battery cover . Slide the battery cover towards the arrow mark while pressing it. (2) Load batteries. Load two Size AA batteries included observing the correct polarities.
13 ENGLISH When the indicating lamp blinks in green or the message “POWER SA VE” or “OUT OF FREQUENCY” appears on the screen, there is something unusual about the status of reception.
14 ENGLISH OPERA TING INSTRUCTIONS (continued) The adjustment status will be displayed as guidance while you press these buttons. While the guidance is on display , press or ▲ to turn up the volume. While the guidance is on display , press or ▼ to turn down the volume.
15 ENGLISH Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard. When MUTE is used, the guide display will continue for 5 sec. and then turn off.
16 ENGLISH OPERA TING INSTRUCTIONS (continued) Press the SELECT buttons (remote controller and keys) to move the pink marker to select an item. Press the VOLUME button and the ▲ and ▼ keys of the main unit ( or key of the remote control) to adjust or set the selected item, or to switch the menu.
17 ENGLISH Adjustment Item List Menu item Selected characters Adjustment item Setup hint M A I N PICTURE (in RGB is selected) CONTRAST Contrast Narrows the gap between brightness and darkness. Broadens the gap between brightness and darkness. Adjust for maximum visibility to suit the ambient brightness.
18 ENGLISH OPERA TING INSTRUCTIONS (continued) Adjustment Item List (continued) Menu item Selected characters Adjustment item Setup hint M A I N PICTURE (in VIDEO is selected) CONTRAST Contrast Narrows the gap between brightness and darkness. Broadens the gap between brightness and darkness.
19 ENGLISH Menu item Selected characters Adjustment item Setup hint M A I N DISPLAY (in RGB is selected) DISPLAY AREA Display area NORMAL NORMAL ↔ FULL Set the display as desired.
20 ENGLISH OPERA TING INSTRUCTIONS (continued) Adjustment Item List (continued) Menu item Selected characters Adjustment item Setup hint M A I N FUNCTION LANGUAGE Language selection ENGLISH (E) ↑ DE.
21 ENGLISH Menu item Selected characters Adjustment item Setup hint M A I N F U N C T I O N INPUT SELECT RGB1 INPUT RGB1 input selection Sets to SKIP. Do not select when switching inputs. Sets to SELECT. Select when switching inputs. Setting an unused jack to SKIP can accelerate switching speed.
22 ENGLISH OTHER FEA TURES Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below . The previously recorded items will be lost. The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity .
23 ENGLISH The status of signal reception is checked automatically and the result is displayed on the screen. Status Display Example Signals are received normally. •The input terminal and the horizontal and vertical frequencies are displayed in a guidance image.
24 ENGLISH OTHERFEA TURES (continued) 1) The video signal when a screen with an aspect ratio (the ratio between the sides and width of the screen) of 16: 9 is compressed to 4: 3.
25 ENGLISH Press the MENU button to cancel sound mode. The power save mode is activated when this mode is canceled. When an input signal is present, the sound mode is canceled automatically , the On mode is activated and the input signal is displayed.
26 ENGLISH TROUBLESHOOTING ● Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer . Symptom Point to check See page ● The screen appears blank with the power-indicating lamp off.
27 ENGLISH When RGB input is selected, the display screen may not be normal in some cases, depending on the system devices connected. When this happens, always make the following adjustments. Actions to Correct Abnormal Displays ■ The display image may be momentarily disturbed during clock adjustment but this is not a failure.
28 ENGLISH PRODUCT SPECIFICA TIONS Product specifications and designs are subject to change without notice. The monitor takes at least 30 minutes to attain the status of optimal picture quality .
29 ENGLISH RGB terminal (D-sub 15-pin connector) Pin Input signal 1 R. video 2 G. video or SYNC. on Green 3 B. video 4 No connection 5 No connection 6 R.GND 7 G.GND 8 B.GND 9 No connection 10 GND 11 No connection 12 Bi-directional Data (SDA) 13 H. sync or H/V composite sync 14 V.
30 ENGLISH Screen controls are factory-preset for the following signal modes (RGB input): Front porch Sync width Back porch Blanking width Horizontal timing Horizontal frequency 24 kHz to 52 kHz 0.1 µs or more 2.0-3.8 µs 1.2 µs or more 3.5 µs or more Horizontal frequency 52 kHz to 64 kHz 0.
An important point after buying a device Hitachi CMP307XU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi CMP307XU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi CMP307XU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi CMP307XU you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi CMP307XU will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi CMP307XU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi CMP307XU.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi CMP307XU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi CMP307XU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
