Instruction/ maintenance manual of the product FP150 Hobart
Go to page of 8
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 33530 Rev. A (3-98) MODEL FP150 FOOD PROCESSOR ML-104600 FP150 Food Processor N S T R U C T I O N S I.
– 2 – FP150 Food Processor T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . .
– 3 – Installation, Operation and Care of MODEL FP150 FOOD PROCESSOR SA VE THESE INSTR UCTIONS FOR FUTURE USE GENERAL The Model FP150 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables, fruits or cheese.
– 4 – Interlock switches prevent the machine from operating when the feed hopper is out of position or the pusher plate is raised above the feed hopper.
– 5 – CUTTING TOOL GUIDE Crimping Slicer — 3 / 16 " (4.5 MM) For ripple slicing of root vegetables. Fine Slicer (2 Blade) — 1 / 16 " (1.5 MM) For slicing firm or fragile products. Also for use with 9 / 32 " dicing plate. Makes very thin slices of pepperoni, mushrooms, cabbage, potatoes, cucumbers and radishes.
– 6 – USING THE FEED HOPPER After the pusher plate is raised, prepared products such as potatoes, carrots, onions, lettuce, cabbage, etc., can be placed in the large feed hopper.
– 7 – MAINTENANCE WARNING: TURN THE MACHINE OFF AND UNPLUG THE ELECTRICAL CORD BEFORE DOING ANY MAINTENANCE. Routinely inspect the machine to ensure that it is in proper working order. Plates must be clean, intact and sharp. Regularly lubricate the pusher plate shaft with a drop of mineral oil, NOT COOKING OIL.
– 8 – TROUBLESHOOTING FAULT Motor won't start. Machine stops while operating and won't restart. Low output or bad cutting results. Scraping sounds. Cutting tool locked to shaft. POSSIBLE CAUSE A. Feed hopper not locked in correct position.
An important point after buying a device Hobart FP150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart FP150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart FP150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart FP150 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart FP150 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart FP150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart FP150.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart FP150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart FP150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
