Instruction/ maintenance manual of the product FP300 Hobart
Go to page of 8
FORM 19157 Rev. B (11-98) FP300 FOOD PROCESSOR MODEL FP300 ML-104495 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 I N S T R U C T I O N S MODEL FP300 FOOD PROCESSOR.
– 2 – Installation, Operation, and Care of MODEL FP300 FOOD PROCESSOR SA VE THESE INSTRUCTIONS GENERAL The FP300 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables, fruits, or cheese. The compact unit is designed for ease of operation and quick cleaning.
– 3 – ELECTRICAL CONNECTION WARNING : THE ELECTRICAL CORD HAS A THREE-PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THE PLUG.
– 4 – Operations with a Single Plate — (Fig. 1) SLICING, SHREDDING, GRATING, AND JULIENNE CUTTING 1. Raise the pusher plate using the pistol grip handle and turn it to the left. 2. Release the feed hopper lock by turning the finger paddle counterclockwise.
– 5 – USING THE FEED HOPPER After the pusher plate is raised, pre-pared products, such as potatoes, carrots, onions, lettuce, cabbage, etc. can be placed in the large feed hopper. When cutting French fries with the Julienne cutter, position the potatoes at the lower-right corner of the large feed hopper.
– 6 – CUTTING TOOLS Fractional sizes are in inches (millimeters are in parentheses). Slicers Use Fine and Standard Slicers for sliced products and for dicing. Soft products like tomato use the FINE SLICER not the STANDARD SLICER. FINE SLICER 1/16 (1.
– 7 – Dicer and French Fry Plates The recommended slicer plate will produce near-cube shaped products. The DICER grid dimension must be equal to or larger than the SLICER dimension.
– 8 – FORM 19157 Rev. B (11-98) PRINTED IN U.S.A. MAINTENANCE WARNING : TURN THE MACHINE OFF AND UNPLUG THE ELECTRICAL CORD BEFORE DOING ANY MAINTENANCE. Routinely inspect the machine to assure that it is in proper working order. Plates must be clean, intact and sharp.
An important point after buying a device Hobart FP300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart FP300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart FP300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart FP300 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart FP300 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart FP300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart FP300.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart FP300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart FP300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
