Instruction/ maintenance manual of the product Deep Cleaner with Auto Rinse SteamVacuum Hoover
Go to page of 17
The Easy to Use Deep Cleaner Deep Cleaner with Auto Rinse ® ™ ™ SteamV ac™ Dual V™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www .hoover .com ENGLISH ➜ pp. 1-17 ESP AÑOL ➜ pág. 18-27 FRANÇAIS ➜ p.
2 Impor tant Safeguar ds! When using an electrical appliance, always follow basic precautions, including the following: W ARNING: T o reduce the risk of fire, electric shock, or injury: • Use indoors only . • Use only on surfaces moistened by the cleaning process.
Fill in and Save Please enter the COMPLETE model and serial numbers in the spaces provided and save. The model and serial numbers are located on the data label on the bottom of the cleaner . Model No. ____________________________ Serial No. _____________________________ Hint: Attach your sales receipt to this owner ’s manual.
Attach hose/cor d hook Inser t tabs on hook into slots on back of cleaner . Snap hook onto cleaner . Slide tabs (E) on caddy into slots (F) on back of cleaner . 4 The assembled cleaner will look like this drawing. Model with SpinScrub™ hand tool is shown.
5 1-9 1-11 1-10 1-12 1-13 1-16 1-15 1-17 G H Rotate top of caddy toward cleaner handle. Slide caddy down so notch (G) on caddy rests in hook (H) on cleaner . Storing hose and tools Pr ess hose, a few inches fr om nozzle connector end (I), into caddy .
1-18 Pull tool down and outward. T o reposition the tool, reverse this pr oce- dure. 1-19 How to reattach tool cover The tool cover is designed with a break- away feature which allows it to snap fr ee if it is pushed open too far . T o reattach, align hinges of cover with holes on sides of tool storage area.
7 2. How to use The assembled deep cleaner will look like the drawing. Model with SpinScrub™ hand tool is shown. 2-1 2-2 1. Hand grip 2. Solution trigger: press to release cleaning solution 3. ON/OFF switch 4. Rinse Setting switch 5. SpinScrub™ hand tool (not included with all models) 6.
Automatic shut of f When the recovery tank (lower tank) is full the automatic shutoff mechanism will shut off the deep cleaner suction (suction will be noticeably reduced). At that time, the yellow float disk will rise to the top of the recovery tank lid (B).
9 2-13 2-14 2-15 2-16 Fill container (16 oz.) with HOOVER Carpet/Upholstery Detergent or HOOVER Bare Floor Cleaner . Do not use Bare Floor Cleaner on carpet or upholstery . Do not use any type of wax with your ‘SteamV ac’ deep cleaner . T o assure proper r esults, use only HOOVER detergent.
10 Befor e you begin cleaning a. V acuum thoroughly - For carpet, use a HOOVER vacuum cleaner with an agitator for best results. V acuum uphol- stery with a vacuum cleaner with clean- ing tool attachments. Use a crevice tool to reach into tufts and folds.
➡ ➡ ➡ ➡ ➡ ➡ Carpet Cleaning Slide nozzle completely onto cleaner . Press down on nozzle to secur e it. Replace recovery tank (Fig. 2-17). The nozzle must be in the proper position in order for the recovery tank to go on properly . Raise cleaner to upright position and replace clean water tank (Fig.
12 Cleaning bare floors 3-10 How to attach bare floor attachment (A vailable at additional cost if not includ- ed with your cleaner .) Unplug deep cleaner from electrical outlet. T o prevent possible leaking, remove clean water tank (Fig. 2-10) and recov- ery tank (Fig.
3-16 3-17 Drain solution tube by placing round end in sink and raising nozzle above your head. Press the trigger . 13 Drain suction hose by turning deep cleaner ON and holding nozzle up for several minutes. Do not press trigger . Unplug deep cleaner from electrical outlet.
3-21 14 A B 3-19 Attaching scrub module A vailable at additional cost if not includ- ed with your cleaner . 1. Open the tool door and remove the SpinScrub™ hand tool. 2. Grasp the sides of the brush module and lift it from the base (L). 3. Snap scrub module onto the base.
4-1 4-2 T o replace brushes Align posts (A) on both ends of brush assembly with slots (B) in cleaner hous- ing. Make sure that the squar e post (C) also aligns with the square hole (D). T ur n brushes slightly until post fits easily into hole. Press brush assembly firmly to snap into place.
16 • checking the Y ellow Pages under “V acuum Cleaners - Household” OR • calling 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only). Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay .
17 Full One Y ear W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner’ s Manual against original defects in material and workmanship for a period of one full year from date of pur- chase.
An important point after buying a device Hoover Deep Cleaner with Auto Rinse SteamVacuum (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Deep Cleaner with Auto Rinse SteamVacuum yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Deep Cleaner with Auto Rinse SteamVacuum - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Deep Cleaner with Auto Rinse SteamVacuum you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Deep Cleaner with Auto Rinse SteamVacuum will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Deep Cleaner with Auto Rinse SteamVacuum, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Deep Cleaner with Auto Rinse SteamVacuum.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Deep Cleaner with Auto Rinse SteamVacuum. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Deep Cleaner with Auto Rinse SteamVacuum along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
