Instruction/ maintenance manual of the product Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit Hoover
Go to page of 20
ENGLISH ➜ pp. 1-20 ESP AÑOL ➜ pág. 21-36 www .hoover .com ® FloorMate™ SpinScrub™ Hard Floor Cleaner with portable tool kit.
2 Impor tant Safeguar ds! When using an electrical appliance, always follow basic precautions, including the following: W ARNING: T o reduce the risk of fire, electric shock, or injury: • Use indoors only . • Use only on surfaces moistened by the cleaning process or small spills.
3 Fill in and Save For your recor ds, enter the model number and serial numbers in the spaces pr ovided. These numbers are located on the data label on the back of the cleaner body . Model No. ____________________________ Serial No. _____________________________ Save your sales receipt and attach it to this manual.
1. Soft hand grip 2. ON/OFF switch 13. Squeegee (underneath nozzle) 3. Solution trigger: squeeze to r elease 14. Bumper cleaning solution 15. Soft-tread wheels 4. Mode selector dial: turns brushes 16. Hose connector door ON for wet cleaning and OFF for wet 17.
Rotate bottom handle support (A) up to the upright position until a snap is felt. Align control r od (B) on upper handle (C) with slot in bottom handle support (D). Push upper handle (C) all the way down until you hear it snap in place. 5 4 2 3 4 2 3 Assemble handle Continued ➜ C C A D B T o install brushes, place handle in upright position.
The caddy conveniently fits over the top of the cleaner nozzle (A) for storage. 9 9 T ool caddy A C C D E 8 While holding nozzle in place, slide latches inward to lock in place. 6 Pr ess br ush assembly firmly to snap into place. 7 T o install nozzle, make sure latches (C) ar e out.
7 Push switch (A) once to turn cleaner ON. Push switch again to turn cleaner OFF . A 14 ON/OFF switch A 13 Handle release pedal Step on pedal (A) to lower handle to operating position. Handle does not lock into a single position, but “floats” to allow convenient operation.
8 17 The Mode selector dial (A) turns the brush- es on and off. Y our HOOVER FloorMate™ SpinScrub™ Cleaner can be used to both vacuum dry debris and wet clean non-carpeted floor surfaces such as vinyl, tile, marble and sealed wood. It is not intended for use on carpet or rugs.
9 Pour cleaning concentrate into tank (B). Fill tank to fill line (C) (1 quart) with warm water . B C 22 DO NOT use cleaning concentrates that contain solvent based ingredients. CAUTION: HOOVER® Floor to Floor™ Cleaning Concentrate cannot be used in Hoover SteamV ac™ products.
Recovery (lower) tank Automatic shut-off An automatic suction shut-of f is built into the recovery tank to prevent the tank fr om overflowing. When the shut-off activates, the cleaner will not pick up debris and the sound of the motor will change. The r ecov- ery tank is full and must be emptied.
11 29 Reposition filter . Replace filter lid. Pr ess down firmly until snapped in place. NOTE: The filter , filter lid and tanks must be replaced, or the unit will not work properly . The tank lid contains a washable, r eusable filter . Clean this pleated filter when suction is low or r educed.
Use your HOOVER® FloorMate™ SpinScrub™ Cleaner to: • Dry V acuum to remove loose dirt, hair and debris. • W et Clean the floor surface. The brushes will provide light agitation to help loosen dirt. • W et Pickup reduces drying time of the floor surface.
Set Mode selector dial to DR Y V AC position and vacuum floor . T urn cleaner off and disconnect from electrical outlet. Empty recovery tank (see Figs. 26 and 27). Determine the type of brushes to be used (either gray for ceramic and other tiles or white for vinyl and sealed wood floors).
14 Floor swivel tool Attach hose and tool • Swivel head • 2 rows of br ushes • Use to clean small, tight ar eas Unplug cleaner from electrical outlet. How to connect hose ✓ Open hose door (A) on side of cleaner . ✓ Align hose connector (B) with hose and solution ports (C).
Befor e storing cleaner: T urn cleaner OFF and disconnect from electrical outlet. • Empty and rinse solution and r ecovery tanks. Allow to air dry . • Press on upper handle r elease button to lower handle for storage. • Make sure that nothing is pr essing on the nozzle squeegee.
16 Maintenance Cleaning the nozzle T urn cleaner OFF and disconnect from electrical outlet. The cleaner ’s nozzle can be removed for easy cleaning. Slide the two nozzle release latches (A) outwar d. Remove nozzle (B) by pulling straight out. Rinse nozzle under running water .
47 48 49 50 Cleaning the brushes The brush assembly can be r emoved for easy cleaning. T urn cleaner OFF and disconnect from electrical outlet. Place handle in the upright position. Remove tanks to prevent leaking. Set aside. Pull the two nozzle release buttons (A) out.
T roubleshooting What’ s the problem? What to do Cleaner won’t run ✓ Make sure the cleaner is plugged in firmly . ✓ Check the fuse or breaker . Low suction ✓ Empty the recovery tank; it may be full and the automatic shut-of f engaged. ✓ Make sure filter and filter lid ar e properly positioned.
19 T o obtain approved HOOVER service and genuine HOOVER parts, locate the near est Hoover Sales and Service Center or Authorized Hoover W arranty Service Dealer (Depot) by: ✓ Checking the Service Section of Hoover on-line at www .
20 Full One Y ear W arranty (Domestic Use) Y our HOOVER® appliance is war- ranted in normal household use, in accordance with the Owner ’s Manual against original defects in material and workmanship for a period of one full year from date of purchase.
An important point after buying a device Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit will certainly help you make a decision on the purchase.
If you already are a holder of Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
